Kanaworm$

Thank you sir! You better buy this if your serious. Great guy and a great price!

Check out the classifieds sections or eBay! I have one but i'm not selling it ....

I know the prices were MSRP and most times those prices are inflated. I'm not knocking the products whatsoever. I just thought the MSRP was quite high. I will let my ears make the final decision before I buy a product.

Looking good man! Keep up the good work!

Welcome ....

Best advice is to go to as many shops as you can and listen to as many speakers as possible.

Thumpper is a tease! J/K! We all know your a busy man moving and getting set up again.

Definately save all receipts! That way you can show all expenses and report them and hopefully write them off on next years taxes. Find a good accountant.

LOL....wow. Pretty salty. Wish their website had (a lot) more info on it. But those would have to be some pretty spectacular pieces of equipment to support those prices, considering they're priced up there with some of the best performing speakers on the planet. That is what I thought as well!

I would troubleshoot all wires and RCA's to make sure everything is hooked up right. Make sure the RCA's are not pinched. Check all speaker connections as well to make sure they didn't come disconnected and shorted. Do you have another amp that you could try to see if it works normal? Is the amp new or used? If all else fails email Jacob at [email protected]

Yes! Look for the wire coming from the alt to the + post on the batt and add to it.

I still love the Tri-Sobaric (SP) design! That box had excellent SQ! I still have a new pair of the 4 ohm 6.5" and a pair of the 1" titanium dome tweets.

Welcome .... Been through Hutchinson plenty of times!

If the Eclipse fills your need and can be repaired, I would check with dB-R and see what they say! If not then the above suggestions will all work just fine.

It has 4 gauge input, I guess I would run 4 gauge to it. Plus since the amp is fused internally no need to fuse it twice imo.

I think he has (1) 4 gauge run from battery to a fuse/distro and then 8 gauge off to the amp.

Let's see it!

Very nice work man! Love the door panels, they look great!

Well, Incriminator doesn't have any internal pictures, but the case on the 20.1 looks similar to the SAZ-2000, and the demensions are also similar. Here is the IA30.1 beside the IA20.1

Zenon builds the amplifiers for both companies to Jake (Sundown) and Nick's (Incriminator) specifications.

What similarities do you see?

My headunit has HPF/LPF . They only go to 140hz tho which is why i need the x-over in the amp as well. So if I set my headunti crossover for sub around 80hz, as well as 80hz for hi-pass, how would I set up the amp? What amp are you going to use for your sub and what head unit are you using?

Basically the SSF is a highpass crossover. What HU?

I would run all 4 rca's to the 50.4 and use the out rca on the amp to run to your sub amp. Use channels 1-2 to run your tweets set to highpass and most likely the x10 switch. Play around with the frequencies to make sure your not going to stress the tweeter. Run your 6.5 mid's on channels 3-4 on the LPF and use the SSF filter to bandpass the frequency this will eliminate most of the sub frequency going to your mid. You're going to need to listen to each set of speakers separately when setting the gain and crossover to make sure not to distort the speakers.