anarchyaudio

Hmm, my dodge has a huge windshield and dash area thats why I was considering it, I think I can get them down low enough not to bother my view that bad wont know till I try

Thats Great, Love the install, The Song choice for hair trick is great, Freaking bad ass Van

Very Nice, I bet it does sound great in such a small cab.

I am still new to the SSA world, but just from reading this one topic and the way you guys ( ie the owners/builders of the SSA line) speak about your product and dedication to the industry. I cant wait to be a proud owner of your subs. With that said. This sub looks to be a monster, Cant wait to hear it and see it in action. Thanks for bringing the Dedication and Craftsmanship.

Yes exactly that is what I was thinking a speaker located there about the size of a tach guage, Fiberglassed in nice and sweet to give it that nice molded look. The position I am in is how will it sound. Guess I wont know till I try it.

Ya, I am wanting to work with it, just was wondering if anyone had use this type of application. I really like to hear what everyone has to say and get as much insight as I can before starting a project. Just so I can test with the most effieciency possible. Given my limited experience thus far with the car audio environment. I know it possible but it plausible to listen to the speakers in a given location not properly mounted or should I mount them where I want them listen to them if I dont like seek a new location. And work my way down the list that way.

http://gorillaglue.com/tapes.aspx Gorilla Tape and glue is da chit

Nice, What is the smallest one you have made?

Looking good

I have been getting a lot of opinions lately for sq subs, amps and setups. I was wondering, per a suggestion earlier, That if I ran 8's in my door for mid bass and a 3" woofer for mid range in kick panel with tweets in A pillar. Has anyone ever made a custom speaker pod in the A piller for a 3" or a 4 " woofer. And if so how does it sound, what are the trouble you run into with that kind of set up. I am trying to shy away from kick panels just cause I am a big guy and the kicks being so low I am afraid I will lose alot of imaging. But here is what I am afraid of putting the mid ranges in the a pillers, that it will be to splashy or high pitch and make your ears bleed with the reflections off the windshield. I dont have room in my doors for both the 8's and the midranges with out doing some major recontruction which I am wanting to stay away from as well. Thanks ahead of time for everyones opinions.

Ya, I am thinking about redoing my Dodge and making me a center console, taking out the middle seat part, and building me a good ported enclosure. So was trying to get opinions, I was wondering if a DVC 4 ohm or 2 ohm voice coil made a realy difference in the sound quality. I know it will draw more on the amp, but are the 2 ohm set up a little heavier/stiff than the 4 ohm versions. Personally I dont like kicker, I have polks right now single vc they are pretty good sounding, just wanted to switch to single 12 dvc, In the end I will probably end up changing my entire set up. I am leaning towards the Icon's everything I have heard about them is good good good. Anyone have an opinion on say 4 8's versus 1 12, I can get a real deal on dvc 8's but I am not sure they can get down low as I want them 2.

Great, thanks guys, I guess most of the other speakers out there are for spl purposes.

Just wanted to get an opinion on the best SQ 8's 10's or 12's. I have limited experience with anything above the 200 dollar a sub range. For the sake of arguement lets use a small enclosure 1.5 cubes or less. With 1kw or less

WOOOT International House of Pimpness, I have arrived woot

Cool Deal Ill have to check into the amp situation, Thanks again guys I am sure Ill have some more question when the time comes for wiring and speaker choices

To me the Board design may be the same but the quality of the individual components make a huge difference. Lets take for a expample a simple resister. If the rating is 2 low on the resister it burns or lowers the effiency of the over all product and your talking a 20 cent resister that could have spent 25 on got better quailty. I am sure both amps use quality parts, sometimes its just some minor difference that make a world of difference.

Cool I was thinking along that line but was not considering there would be no bass coming from the 3"/4" in speakers. I can now see why it can keep up with it. So my next question in this series is, With the set up on amps I have now, A mono block and a 4 channel, what is the best way to wire the speakers. I am running active tweets and mids right now on seperate channels. And the subs of course on there own. If I add the 8's for mid bass and a 3 or 4 in for midrange and still have my 1" tweets up front do I run one channel for midbass one , one channel for tweets and 2 chanels for midrange. I may be overthinking this. Thanks for your help with this I am really wanting a great front stage. Money is the only real constraint I have. modifications and work part of it I love doing. Just as a reiterations the head unit has active 3 way crossover with variable slope up to 18 db,

Very nice pics. Congrats again to everyone hopefully will be involved next year.

Cool I was thinking, the volume of sound versus the other speakers. With the subs and the 8s was afraid that the midranges would be drowned out the 2 5.25 sound good but sometimes they get drowned out by the bass I have now.

WOOT congrats guys would love to see the scores and some pics. I have a buddy that judges/competes )Team twisted mayhem in meca. He sent me a pic of a guys mini van that shattered the window. Congrats again

any reccomendations on a good mid bass 8's and midranges

Cool deal So should I run 2 3" or 2 4" to a kick panel. I have no idea what a good 3 or 4 in would be, nor a midbass that is slim enough to fit in the door I can make the whole work but not sure about the depth is there any shallow 8's out there. I start research the 8's myself also. Thanks for the tip.

Sorry for long delay in response internet down @ home so have to do everything @ work for now.

I have a 4 channel amp the fronts on my rca's are going to my tweets ran through the amp, my head unit has active 3 way crossover it has a variable slope of 6, 12 or 18 they are crossed over @ 3500 hz the mids are ran in parallel off the rear rca and the amp ran @ 80hz through 3500 hz The subs have seperate channel running @ 90 hz and below in a 1 cube sealed boxes. I am adding polifill to them this weekend to see if I can inprove the lows, if not building a new enclosure for 1 12

Read what he typed again. He said 3 way active in the door, and 3" or 4' in the kick panel. I could fit the 8 in the door but nothing else. would a 4 in driver in the kick panel make that much midrange, I may be missing the point. I could put like 2 4" in kick panel and the 8 in the door. is that it or am I missing something.