mikel7829

4K screens are really reasonable right now. You can get into 55-60 inch Samsungs for $15-1700. I paid $2600 for the Sammy plasma in my living room ~6 years ago. I am currently itching for a class 55 or 60 for the bedroom right now... Mmmmmm 60 inch 4K gay porn... .............

Lmfao thanks for the negs!!!

LOL,,

Uh yes I am very aware of that..lol cool, i was getting tired of correcting you. OMG.. ....

Uh yes I am very aware of that..lol

The speed of air does effect unwanted noise....More port volume slower the speed so that does not mean less port noise? think of it like using a larger gauge wire (more current), larger port area results in lower air velocity. That results in less unwanted noise.correct? larger area -> lower port air velocity -> less air turbulence/chuffing Ok.. so are you agreeing with me or not..Lol

While I don't want to see anyone leave, I see your post as pure hypocrisy. I have seen you criticizing others and your inability to cope with their disagreement to your opinion. You appear to be the one who is "butthurt," hence your leaving. Calm down, take a step back, and look at it from another perspective. Ok! fine I will stay you talked me into it An my butt actually is hurting.. I have a big chunk of meat hanging out of it and the ointment does not seem to be working anymore:huh2:If your going to peck at other people you better be ready to take some pecking back when it comes at you. Are you saying you want to peck me?I am saying you are worse than some of my ex girlfriends. If you get sand in your vagina and want to leave, then leave. No need to announce it, this isn't FB. Says the guy that post his wife's achivements...LMAO No need to bring her into this. And I accomplished more during my morning shit than you probably have all day. Lol.. Your probably right I have not done shit all day went back to work the 2nd and today is probably my only day off for a few maybe march/april or so..Plus that is not fair, because I am scared for a bowel movement because of the butthurt

The speed of air does effect unwanted noise....More port volume slower the speed so that does not mean less port noise? think of it like using a larger gauge wire (more current), larger port area results in lower air velocity. That results in less unwanted noise.correct?

While I don't want to see anyone leave, I see your post as pure hypocrisy. I have seen you criticizing others and your inability to cope with their disagreement to your opinion. You appear to be the one who is "butthurt," hence your leaving. Calm down, take a step back, and look at it from another perspective. Ok! fine I will stay you talked me into it An my butt actually is hurting.. I have a big chunk of meat hanging out of it and the ointment does not seem to be working anymore:huh2:If your going to peck at other people you better be ready to take some pecking back when it comes at you. Are you saying you want to peck me?I am saying you are worse than some of my ex girlfriends. If you get sand in your vagina and want to leave, then leave. No need to announce it, this isn't FB. Says the guy that post his wife's achivements...LMAO

The speed of air does effect unwanted noise....More port volume slower the speed so that does not mean less port noise?

"For example" Moving air from "point a" 100ft to achieve the same CFM at "point b" at the end, You have to reduce the volume/area to keep your desired speed. larger volumes for longer distances loses speed And IMO would create less unwanted noise..

Air velocity was more the factor than "cosmetics" and less port noise VIA "more port area" with the octagon ports.. Port area is what you said. Air velocity was more the factor than "cosmetics" and less port noise VIA "more port area" with the octagon ports.. Port area is what you said. Well maybe I should have said volume You know what I was getting at Smaller the volume faster air travels..Larger volume slower the velocity is what I was getting at. air speed is related to the cross sectional area not volume. No No read up... the distance has to be calculated as well "for example" for you total..If you would like I could snap you a pic of my degrees in this field. http://www.dwyer-inst.com/Products/AirVelocityIntroduction.cfm

While I don't want to see anyone leave, I see your post as pure hypocrisy. I have seen you criticizing others and your inability to cope with their disagreement to your opinion. You appear to be the one who is "butthurt," hence your leaving. Calm down, take a step back, and look at it from another perspective. Ok! fine I will stay you talked me into it An my butt actually is hurting.. I have a big chunk of meat hanging out of it and the ointment does not seem to be working anymore Pronated rectum? Is this Adcom? Omg!!! No you just didn't!!!

While I don't want to see anyone leave, I see your post as pure hypocrisy. I have seen you criticizing others and your inability to cope with their disagreement to your opinion. You appear to be the one who is "butthurt," hence your leaving. Calm down, take a step back, and look at it from another perspective. Ok! fine I will stay you talked me into it An my butt actually is hurting.. I have a big chunk of meat hanging out of it and the ointment does not seem to be working anymore:huh2:If your going to peck at other people you better be ready to take some pecking back when it comes at you. Are you saying you want to peck me?

Air velocity was more the factor than "cosmetics" and less port noise VIA "more port area" with the octagon ports.. Port area is what you said. Air velocity was more the factor than "cosmetics" and less port noise VIA "more port area" with the octagon ports.. Port area is what you said. Well maybe I should have said volume You know what I was getting at Smaller the volume faster air travels..Larger volume slower the velocity is what I was getting at.

No disrespect brother...But I studied this field for years.. Then give arguments that are based on facts and can be checked. (maybe even provide a source while you're at it.) How are Octogonal ports ever going to give more port area that the same size circle, not to mention a square port. EDIT: yes, I actually made this in paint. That is a pic of surface comparison .. Volume I guess that would depend on the desired frequency as you have to figure in the Length of the port walls as well.Correct?

While I don't want to see anyone leave, I see your post as pure hypocrisy. I have seen you criticizing others and your inability to cope with their disagreement to your opinion. You appear to be the one who is "butthurt," hence your leaving. Calm down, take a step back, and look at it from another perspective. Ok! fine I will stay you talked me into it An my butt actually is hurting.. I have a big chunk of meat hanging out of it and the ointment does not seem to be working anymore

Well fellows I am going to take a break for a while I'm sick of getting disrespected and criticized for my posts if my opinion is different than a few certain members "nonsense really" people should not have to hear this when they have different opinions, or people should not get "butthurt" when somebody does not agree with them..A few of ya'll no how to get a hold of me If you wanna B.S Michael

No disrespect brother...But I studied this field for years.. ummm shit posting is meant for the hop. Ummm I am out of hear I am tired of getting disrespected by a few of ya'll and criticized on every post I make..Way to run people off..congrads

Hey fucker I have red hair, and I'm not soulless lol His referrence was to redheads with vaginas. I am going to assume you do not have a vagina. Man vagina?

No disrespect brother...But I studied this field for years..

Read your Pm's!!

.Phrequency responses geniess!!!

Air velocity was more the factor than "cosmetics" and less port noise VIA "more port area" with the octagon ports..

Cancelation will not be a issue ??