CBFryman

oh BTW, tried drilling htem out properly (i have the kit) and they where so jammed i coudlnt get either out, ended up soldering the wires in. ghetto but it works.

THIS ISSUE HAS BEEN RESOLVED and yes i am authorized lol i think mr. ///M5 said it best : http://www.soundsolutionsaudio.com/forum/i...ndpost&p=149447 - Flakko

very nice, c-notched to drag frame? my friends GMC 1500 was bagged and could drag frame. only way to slow down at a light in style is to drag your hitch. police may not particularly like you though.

Well ive decided to take the TC9 and recoen it to an 18. im hopping to get the hook up and learn how to recone speakers the right way. as for the e12a coen and coil. Would it be possible for me to remove the surround and spider all surgery like and put a new on on and sell it? i know putting a new surround on a cone is easy, spiders, however, i dont know. Ideas?

dont know if its been resolved but i didnt feel like reading the thread. Motor Mount CV Joint (however you said it doesnt do it when its stopped so im geussing this is a negative) phucked up balencer, though if it doesnt do it at hight speed im doubting this too. because its inline (me thinks) its not a dropped cylender. My GF's car does the same thing. She has a cracked motor mount.

im telling you 30band FTW. it doesnt matter if you dont compeate. is there a single note too sharp? small range that needs boosting that is only evident in one or two songs? 30 band will get the job done.

300-350 shipped. More or less depending on the seller. Im never going to let mine go but if i where i would be asking in the upper end of that range. Bigger and lower is better with them. 10cuft@10Hz would be awsome for the low low notes. 7.5cuft@28Hz dives ungodly 20Hz tones in my truck, chad says the bigger you go the lower they get. A little bird told me TC3HP 15's go for a good price NEW...<400 if you know the right people. I can talk to that little bird to how he got them for such a great price.

but movies have information as low as 5Hz in some casses. You may not be able to "hear" it but it is certianly scensible. How much the people in the dorms near you will appreceate it i dont know. Single Avalanceh 18 would kill.

thought they where wount side by side, as in the individual wires side by side, not the entire coil. My misonception i geuss. I may have to go buy a cheap DVC driver to tear it apart to verify one wya or the other. One of top of the other would cause differences but as long as the coil's wire length is the same and size is reletively the same and windings are the same i geuss the differnces would be no more than the 15% differnece in any given driver's T/S parameters from the test batch for the T/S parameters.

No prob, im not a fan of s10's or toppers, your looks pretty clean. i like the lack of the cookie cutter Smoothie front and no roll pan. Could ditch the topper but im just bias. I hate my dad for ruining the good look of his '05 silverado with a topper. Is it bagged or just lowered?

crack open your average high end large HT cabinet and you will find led panels in them quite often. Lead is only dangerous when injested in high levels or over long periods of time. Dont eat your paint chips in old houses and you will be ok. It CAN hurt if yo uexpose your skin to it for ever, so insentive for geusts to not touch your walls and get their nasty figner grease all over the place. Anyway, im jsut saying lead isnt as poisonious as some may think. Im not saying to start taking your reccomended daily value of lead with your vitamins, but dont avoid it like the pleauge when its an awsome mass adder. With that being said put some cat hair fiberglass in with it and you wont have any problems. some guys on DIYaudio.com epoxied pebble's into their HT enclosures after they found out hot glue let go (lol, lots of rattles) and though i havent been over there in ages because everybody is way over my head (i ask a reccomended tuning and they start going intoremoving nodes from my doors, WTF?) but ~1month after they changed their plan of action i didnt read any complaints. Go fur' it mang.

forward firing with a side fireing port on the drivers side is loudest from my experence. for daily loud driver in the middle/drivers side port on the passenger. down firing can be loud if the floor allows proper slot loading. and your seats dont block/clog the slot. looks titties

got the Bit, out of the blades, still waiting on my free gum and thumb drive.

loud mudderr phuckers. RL-i makes W7 Cry

wait, wouldnt you be in C? 8 runs of wire = Street C.

we'll probably pass each other going 95, im headed to melborne-ish area today, hitting miami sunday and key west all week till next friday then headed back up to LC...

oh and to add to the chitty list, my GF's uncle had a pair of mid line jensen 10's he gave to me when he found out i was into audio stuff that where just sitting in his shed. Said he paid 50 a pop about 3-4yrs ago. Im gonna give them to my GF's mom instead of a single Assasin 10.

Average-Good's e12a Avalanche SE's* RE's* Old Tempest Audiobahn AW's Audiobahn Alum's Assasin's w0's chitty Roadmaster Xplod "Rampage" MTX 4500's* *Temporarily, basically i bought them with the intention of selling in an install or otherwise. ive had a few others, chitty others or ones i didnt know the modle on, one pair of 10's from pioneer which i still have in the garradge and old old OLD Roxfords which i threw away. n00bx

time to start getting the ban saw out and chopping random motors in half Split Gapped using XBL FTW lmao.

better deaden the phuck out of that trunk and door skins, gonna sound like a mother with narrow hips berthing a child with no epidural. that may have been a little excessive but still, Second Skin FTW.

x2 i havent paid for any of this except the HU, her mom has, but im estimating ~20-25hrs of work into this total. at $5/hr that is still over $100 plus the 150 for the HU, 250 is alot for only dating 3 1/2mo. of course $250 is well worth it since as of now she has no system at ALL and the thing rattles like a bizotch and the wind noise with the windows closed sounds like 70mph with the windo cracked in my truck. The newing the better i geuss.

still 228ish pics, 6 per sub, that is 38subs. that is 380ish subs total. average price of say $200 each, that is $76,000 in just subs. That is working 2.5 years as a teacher in florida and buying nothing but subs. lol. but he didnt have to own all of them and alot that he did "own" where probably demoed by him, and he had to give them back later on.

Leaning between the alpines and the pioneer. the more i look at that eclipse the more ugly it gets to me.

for my truck 300 will be the most expensive. followed by the amp then the comonets then the componet amp, then the enclosure. HU will probably come in above the amp when i get it.

10% of what he's played with, not nessicarily owned. Ive played with a number of drivers, not matching that lsit, but easilly 50-60decent drivers and over 100 if you include the crappy ones i bought or used to blow or trash or w/e. Ive owned maybe 20subs total and 15 different modles. Heh, and im only 16. the future doesnt look good.