Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

jcarter1885

SSA Regular
  • Joined

  • Last visited

Everything posted by jcarter1885

  1. I dont see why not, max power means nothing but yeah that amp will work.
  2. Sundowns were having problems with some expensive brands so Jacob recommends some cheap ones, I was using some from Autozone with no problems and then upgraded them to KnuKonceptz Klarity with no problems.
  3. and cant wait to see the finished project
  4. Wouldnt the motor need some work done to it also besides just getting a recone, im curious as well (good question)?
  5. If it's a d1, he can wire to 2 ohms to the pair, so each see's 1 ohm? Yeah I noticed that after I read it again, fixed. Just woke up from a nap reading > me. It happens, I know you probably know a good deal more than I do. That's why the ? was there lol. I doubt it on the knowing more but that is why were all here to catch each other slipping. How are your build logs coming along, havent seen an update in a minute? To the OP yeah it will also depend on your amps as well if they can be strapped like said earlier so make sure you have amps that can be strapped unless this was a general question.
  6. I wouldnt put any hoody in a dryer, I always hang mine or even most shirts for that reason.
  7. If the amp is what you need now then go for the amp if it fits your application and goals since it is for a good price. If deadening is a main concern then go that route, Im waiting till it gets warmer to purchase my deadener so it will be easier to apply. Its gonna come down to a compromise or coin toss.
  8. If it's a d1, he can wire to 2 ohms to the pair, so each see's 1 ohm? Yeah I noticed that after I read it again, fixed. Just woke up from a nap reading > me.
  9. Read this link: http://www.sundownaudio.com/index.php/frequently-asked-questions.html
  10. Sounds like somebody needs to go to Home Depot or Lowe's for some wood.
  11. There are two ways I would do it, first I would install it in the main battery location if it can fit and then monitor your voltage. If your voltage is fine during full tilt then you wont have to worry about two batteries. If your voltage drops then put the stock battery back in and run the Shuriken in parallel, positive of starting battery to positive on shuriken battery, negative of shuriken battery to cars frame. An isolator is not needed unless your playing with your system with the car off a lot.
  12. If you came in with the some more money then go with the DP since it will be louder and outperform the DR on the same amount of watts plus you have enough power for it. Just my .02
  13. jcarter1885 replied to dub26z's topic in General Audio
    Or search through topics under the DC thread and you will find Rusty's email address.
  14. Glad you got it installed and the voltage is sitting high for the Shuriken Batteries, I knew they would hold up. Glad I could be of assistance, I rather someone else have some bump since I cant have none but Im soon.
  15. x2, or like you said whichever one gives you a better vibe and treats you like an individual and not just a customer.
  16. x2. Ours will finally be paid off this spring, after about 10 years of trying to get it paid off. Never again. Like everyone already said, save and then buy. You'll feel better in the end knowing that the stuff is yours and you don't owe anyone for it. x3, that is my goal now only buy what I have cash for or I dont need it.
  17. A testing thread for what, it is a interior speaker amp not a subwoofer amp. I only see testing threads on his subwoofer amps.
  18. No it doesnt work like that, full range means it will play full range. Set your amp to Low Pass Filter at 5,000Hz and your subsonic filter to 100Hz, this way they will play anything from 5,000hz down to 100hz.
  19. An amp has nothing to do with hitting the lows, the box will determine that.
  20. Whichever one fits your budget and fits your goals, it will come down to flipping a coin but both will work well. Sometimes you gotta make these decisions on your own we cant walk you through it. Both will handle the amp and will work well. Also if your that torn between the two then get in contact with the company and share your goals and ask them for there input since they built and played with both subs.
  21. , cant wait for the build log.
  22. excellent pictures fellas, everytime ya'll add some more I change the one on my desktop.
  23. He cant fit an 18" in his trunk.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.