Sir-Lancelot

Going to be hard to have any real midbass doing what you want. Best you can do is pick an efficient mid that can play low like the B&C mids. You can have some midbass if you EQ up at lower volumes, but you are going to have to back off that when you crank it up as PA drivers dont have the XMAX for a lot of excursion. When I see reviews from people on certain drivers claiming good midbass, I have to wonder if they even know what midbass is. A 3 way set up would be ideal, but you are getting into a very difficult task to pull off then. I prefer my set up to be underlapped. I have found you get a frequency boost between the HP/LP so to me it sounds better with some gap between the mids and tweeters. I have never set crossover points at 2000 for mids and 2000 for tweeters for example. Way too bright for me at that frequency and those above and below. I set them a little apart from each other and change the slopes to blend them. I may get put in my place with with my comments by people who know more about it than I do and thats ok, I am always learning. That is how I set it up tho. I do not have horns, i am running B&C mids with super tweeters and I have it sounding good right now. Not great mind you, but loud and clear and that was the goal. The ST's are too bright and i have to back WAY off the gains and level to get them where they sound ok, but they were easier to set up than horns and MUCH less money. That said, I feel sure in the near future I will buy some horns to try in my truck too. Too many people have good things to say about them to ignore. However, to say you cant have a decent sound without horns is false. It is not plug and play and requires work, but they can sound good with some effort. Flame on.

Tuned in and glad you started this. I have an upgrade coming in March and I cant wait to get rid of the POS BB storm. I have my eye on the X. BadAss, but I am open to suggestions.

3' 16" and 2' 16.5" ? LOL!

Get a volt meter for $20 on ebay or use a DMM to check your voltage at full tilt. No need to buy something just because. Since music is dynamic a small second battery back by the amps could help with musical peaks and such and give you a cleaner signal than you would have if you are playing on low voltage.

NICE!! You are lucky to have so many shows with a big turn out. Thanks for taking time to share your vids with us bro.

You turn your HU up to volume "x" at full tilt. ok turn off the subs so they do not make a sound. ok set the gain on the 100.4 to your max HU volume above. then turn the subs back on.

? ? Set the gains on the 100.4 correctly. If it's not loud enough, that's all you have...... make a change.

Turn off your subs and set the gain to the volume level you want your subs.

I ran my 15" XCONS sealed for a little while. They will pound. I was very surprised at the output. I actually LOVED them sealed. The attack and transient response was off the chain.

The dealer can cut a key with the vin number.

Wow, someone raising the dead. Where are the new pics bro? Stop holding out on us.

Now light that bish up! LOL

Ground the HU to the chassis not the factory ground and double check your RCA's.

Sub? Wait what? LOL

Build looks nice man. Very clean.

Sweet! What is that white stuff all over your car?

Damn bro, looks nice.....dont sell it. Get another student loan.

Doin Work!

Thanks man I am glad you made me get the extra now. I am going to do all the dash lights, arm rest, ac, etc. LOL VIDS! I know right, I am slack and I know this. lol I have some, but have not uploaded them. Still no cable. Was even going to take some new ones on my camera, but putting up the Christmas lights and the rain have even set that back. On another note, I am trying to find a new spot for my batteries. I need to push the box up to the rear seat. I am choking them the way it is now. I am destroying the back hatch. LOL I have another 10" I can move it from the hatch, but finding room for big ass bats is not easy.

So now its in our interest to provide parameters? YOU want to see them. YOU are the one stating someones opinion on how the speakers sound doesnt count for anything. We love the speakers and could care less about some lines on a piece of paper. Drop it, or call Ray and ask him for the parameters YOU are interested in. We obviously dont care enough to ask him. dude ?? I try my best to calm everyone down and your gonna get them fired up again ?? thanks alot ... LOL, No shit.

Randal, you know full well it would satisfy 99% of most people to hear them installed, but there is that 1% that will only be satisfied when that can hear it on paper. Neither side is wrong, different people want different things, that's just the way it is bro. There are only a couple of people on here that actually would know what they are looking at if Ray supplied TS numbers. lol

Looks nice bro!

Box looks damn sexy. What amps? Should have no problem being a wind machine.

Is that a T-Shirt I see under that fleece jacket?

Thats hot! Well done Rich.