emh9009

Is the noise meter just as accurate as the others, and are they able to be programed to read above 140db?

"When the contract is received, your leasing period has started. You will generally have around 40days from the day you receive the contract to send it back to us, ship meter to you, use it and send it back to us in specified time." Why not start the lease time when the user recieves it? Can normally track this with shipment tracking the day they get the meter, seems like the shipping cuts down on the time they get to use it... shipping there and back is a good week, easy.

ETA on these? the 11th?

Get all the coils in i assume, then? I can get some pretty sick photos if i had my hands on 4 12" d4s ;) Excited to see the photos and possibly a video or 2 of these!

No, cone area is king. But this is of topic, sorry swagger. I would suggest a normal box with trim panels as well. Save you the hassle of all the curves and glass work.

Why not? Power isn't everything.

Mark has control over when they show up and go away for everyone.

It won't matter, no. A lot of people use a 4 channel amp for just their mids and highs in their front doors. I'll be running 2 channels to my mids, and the other 2 channels to my highs on my 100.4. They're just labels, they're sending the same information to the amp. Whatever you have the setting on the amp or your HU is a different question.

Ordered my 3 this morning. May get the pink for my girl later down the line Can't wait to get these!

What do you ground to? Can't be all too much metal on there..

Holy kick ass build log! Those 4 subs in there look KILLER. Keep at it, we'll be watching!

IIRC you need to take the width of the port and divide that by two to get how far away from anything you want the port to be. You look like you're far enough away. Feed free to play around with different locations to see if you get different results. Can't hurt.

Heard these are a couple weeks behind schedule? Have a new ETA?

Still don't have the coils, production hasn't started on the others either. Other model demands are too high to fit them in right now I'm assuming it's from tax season. Soon though!

Faded by Tyga

I believe i used 1 1/4" screws. Use Titebond II glue. Pre drill your screw holes.

Take a quick half hour to watch this video, sign the petition if you agree with the cause, and whatever else you're able to do to get this known or to help the cause.. Share it on FB, other sites you frequent, anywhere to get the name out. I believe this is an interest we should be concerned with, nobody would want their children taken from them to be used like this. http://s3.amazonaws....012/kony-4.html

Have a good one!

I don't think you should have to worry about head transfer with just that plate either.

Powder coat?

If he has his amp setup up correctly now, then he needs to asdjust the sub level control. Regardless what has been said, most units require the use of this to be off of zero to produce voltage. Lol. So my pictures are fake and I made up the manual? He never said any of that. Just stated that most units need to be higher than 0 to produce voltage. My sub leven on my deck is from 0-12, I currently have it set to 11. At 0 there is no output, no matter what my amp gain is set at.

16mm xmax? holy shit.

Yet another step forward.

Should paint the bracing SSA red More DBZZ

There is a meet in Yakima, WA on the 31st and 1st. Then one in Olympia, WA on April 15th. Woodburn, OR on June 3rd I believe.