bigrank916

Yyyyyeeeeeeeaaaaaaaaaaaaaaaaaaaaahhhhhhhhhhhh!!!!!!!!!!!!!!!

Look at the previous page with the video. Funny.

I did but I was a little late.

I cant believe those presentations are real. I remember some teachers being really cool and letting kids go pretty far with it. That girl is hilarious.

That guy got bitch slapped! Probably wouldnt take no for an answer. What a moroon.

Its hard not to stare at your avatar...

Better now that i scrolled up and saw those pics! Lol.

uneventful

Prefab boxes are known to have high tuning areas around 40-50hz. So no, they wont produce the low bass notes you are looking for.

Thats a perty lookin sub you got there. Im interested to see a build log as well for this. I didnt know these were so highly rated. Nice to know.

Welcome dude. It sounds like you know what you are after. That will be a good step to people helping you here.

Hope nothing bad happened to your alt. The size of the pulley makes a huge difference in the revolutions of the alt. The smaller pulley might have caused the alt to spin too many revs. I dont know for sure but thats why they are custom made.

You can wire all four together at 2ohms while bridging the amp. You should try this option if your amp is 2ohm stable. Voice coils wired in series, speakers wired in parallel

I hope the pulleys were the same size.

I havent heard very good things about the KHC 16V. The amp will get the voltage from the alt anyway. If it is doing its job then the amp should be plenty powered. A 230 amp h/o alt should be holding in the 14's. Do you have 1/0 wiring?

That sounds like a combo of an SAE1200D and an Xcon.

Im not too familiar with it personally but I know that is the site that ///M5 has on his sig. It cant be shit if hes promoting it. If you wanted those instead of SPL tiles, you should have said so in the sig.

That link doesnt work. You dont have to do more than one layer if you dont want to. If you want to cut down on labor I highly suggest you buy the roller with the deadener. It helps a lot.

Looks pretty sweet. Are you going to put some kinda lights in there or is it going to be dark?

Im looking at the site and I dont see anything about that. Are you on a specific budget?

You should make a new thread for this with what your treos are tuned at. It will get more eyes. But look at this... http://www.soundsolutionsaudio.com/store/products/Sundown-Audio-SAE%252d1200D.html

Those are only 6"x10" pieces. It depends on how much of the truck you are going to do and how many layers you want.

Right now its the cheapest sundown amp over 1000 watts. You can use the ssd but make sure the gain isnt too high and you dont get too happy with the knobs. They are great amps though. I own 4 with the SAE1200D coming also. im guessing if i got this amp i should go with the 2ohm ssd since its then 600rms from the sundown. is this correct? If thats how you want to wire it. I would buy the dual 2ohm version and wire it to a 1ohm load and back the gains way off. But the amp will be very efficient at 2ohms and the 600 plus will also do fine. But then you would need the dual 1ohm version ssd instead. So ask yourself, would you have more use for a driver that can be wired to 1 and 4ohms or .5 and 2ohms?

Why, are you going to hook it up to your BTL in your room?