Pics with the little brother, the E8.

Little more info and preliminary T/S specs:

2" coil x 1.57" winding height

1.57" tall magnet stack

0.5" thick top plate

Gap Venting

Basket Window Venting

Pole Venting

High profile foam surround

Paper cone w/ interlocking poly dust cap

Single spider w/ flat, tied down leads

16mm linear one-way x-max

~25 mm one-way x-mech (travel before damage)

300-watt RMS rated power handling

Basket and motor will be BLACK for production. Chrome was easier for the prototype.

Qes: 0.520

Qms: 4.720

Qts: 0.468

Fs: 32.30 Hz

Vas: 55.63 L

Re: 7.26 ohms

BL: 19.47 N/A

Le: 4.47 mH

Specs w/ Coils in series - D4 nominal coils.

Sealed box specs:

1.5 ft^3 = 0.707 Qtc = 50 Hz F3

1.0 ft^3 = 0.798 Qtc = 52 Hz F3

Ported box specs:

2.5 ft^3 tuned to 30 Hz = 27.5 Hz F3 (flat response)

2.5 ft^3 tuned to 35 hz = 30.0 Hz F3 (output bump above 33 Hz)

T/S specs are on the one I put together by hand, so production will vary slightly I'm sure.

Considering offering an intro sale on these for around $100 - how many would be interested?

MSRP will be around $150 - 160 on these when released.

Considering offering an intro sale on these for around $100 - how many would be interested?

MSRP will be around $150 - 160 on these when released.

yeah yeah im ready put me down for 4 of them... i just spoke with my chick she wants 2 and i want 2.. so four

you said 300 rms? and thay are d4s? so for a pair of these an sae 1000 would be a perfect match?

Considering offering an intro sale on these for around $100 - how many would be interested?

MSRP will be around $150 - 160 on these when released.

yeah yeah im ready put me down for 4 of them... i just spoke with my chick she wants 2 and i want 2.. so four

you said 300 rms? and thay are d4s? so for a pair of these an sae 1000 would be a perfect match?

1000D for the pair would work nicely, just keep it turned back a few notches

An SAX-100.2 would also work on a pair quite well.

Hmm, a high roll surround, sexy, but I like the looks of a high roll rubber surround better, lol.

Hmm, a high roll surround, sexy, but I like the looks of a high roll rubber surround better, lol.

WAY too heavy for this driver.

Hmm, a high roll surround, sexy, but I like the looks of a high roll rubber surround better, lol.

WAY too heavy for this driver.

No, I know you definietly have reasons for what you did, a rubber surround just looks better, lol.

Those look nice when are they going to be available?

I've got the proto of these and I love it! I've got it in my room on 150W dayton plate amp and it gets pretty loud! Sounds really good though.

Those look nice when are they going to be available?

Not sure yet - testing interest to see if I should move these up to a higher priority on production.

Going to be a lot of sub for the money.

If Ricky and Jerry get back w/ me and really want to do some big builds with them I will push production to an earlier date.

Jacob, please don't count on me buying anything. I have so much going on and so many things spinning in my head.

Jacob, please don't count on me buying anything. I have so much going on and so many things spinning in my head.

Alright, will keep that in mind.

If Ricky and Jerry get back w/ me and really want to do some big builds with them I will push production to an earlier date.

I know for sure that I can take 8 of them off of you hands. The current enclosure is set up for 8 12's, thought about putting 8 Sd-1's but these subs look alot beefier. I'll have to wait till I get the truck home before I commit to anything else as I have to make sure that they will fit and decide how quickly I want to rebuild it. I more so want to demo this year than be loud on the mic.

So

Rickyharrisjr - 8

BigJon- 4

Come on we need more takers!!!!

Just like the E8 they will take ~3 months or so to come in after production starts. So if you will be in the market around 3 months from now let me know so I can really gauge interest!

if there was an E10 id be in for 8 of them in a few months

if there was an E10 id be in for 8 of them in a few months

There will be later, but 12s will be first.

E8 won't be first???

E8 won't be first???

Yes, the E8 is first

Between 10s and 12s, the 12 is first.

cant wait for 10's