All prices below are based on standard designed enclosures only. Please contact me for any custom box prices. Prices DO include shipping as well as pre-wired speaker terminal(s) and are based on NET cubic footage.

Sealed Boxes Without Carpet

1.0 cubes - $100

1.5 cubes - $110

2.0 cubes - $120

2.5 cubes - $130

3.0 cubes - $140

3.5 cubes - $150

4.0 cubes - $160

4.5 cubes - $170

5.0 cubes - $180

Sealed Boxes With Carpet

1.0 cubes - $120

1.5 cubes - $130

2.0 cubes - $140

2.5 cubes - $150

3.0 cubes - $160

3.5 cubes - $170

4.0 cubes - $180

4.5 cubes - $190

5.0 cubes - $200

Ported Boxes Without Carpet

1.5 cubes - $130

2.0 cubes - $140

2.5 cubes - $150

3.0 cubes - $160

3.5 cubes - $170

4.0 cubes - $180

4.5 cubes - $190

5.0 cubes - $200

5.5 cubes - $210

Ported Boxes With Carpet

1.5 cubes - $160

2.0 cubes - $170

2.5 cubes - $180

3.0 cubes - $190

3.5 cubes - $200

4.0 cubes - $210

4.5 cubes - $220

5.0 cubes - $230

5.5 cubes - $240

how do I figure the cube of the enclosure I need? I am needing an enclosure for a 15" FI Q sub... the deminsions are 16hx48wx16d with a port 14.5hx4wx24.25l how much is this going to cost?

Internal dimensions. Multiply length x width x height, then multiply by 1728.

Internal dimensions. Multiply length x width x height, then multiply by 1728.

thats alot of numbers friend..........

well crack out the calcumalator thingy and figure it out...it'll take you all of one minute.

he already gave you the dimmensions to start with so thats half the work done.

or... http://www.soundsolutionsaudio.com/forum/i...?showtopic=7155

You might be best off taking measurements of your trunk and figuring out the maximum dimensions and let BJ work his magic from there.

Edited September 29, 200816 yr by abxx

Internal dimensions. Multiply length x width x height, then multiply by 1728.

thats alot of numbers friend..........

he meant divide by 1728

Fi recommends 2.8-4.0 cubes for the 15" Q. So that will fall in the $190-210 price category for a standard enclosure with carpet. Best way to tackle this, is to get your max dimensions, and email them to Chris, then he can knock out the design for you.

Fi recommends 2.8-4.0 cubes for the 15" Q. So that will fall in the $190-210 price category for a standard enclosure with carpet. Best way to tackle this, is to get your max dimensions, and email them to Chris, then he can knock out the design for you.

I've been waiting on my 13Av.2 box design for a few weeks now, is his internet still down?

Just got his net back up late last week. Said he is playing catchup. Let me know if you dont hear anything soon.

Internal dimensions. Multiply length x width x height, then multiply by 1728.

thats alot of numbers friend..........

.... I've been able to do that since... 4th grade?

Internal dimensions. Multiply length x width x height, then multiply by 1728.

thats alot of numbers friend..........

he meant divide by 1728

Indeed I did! Thank you.

Edited September 30, 200816 yr by nick_19

Do you make ported boxes bigger than 5.5 cubes? im looking at about 8 cubes after sub displacement and bracing and polyfill

Do you make ported boxes bigger than 5.5 cubes? im looking at about 8 cubes after sub displacement and bracing and polyfill

Yes I do. They are based on a box to box basis due to size, design, and shipping costs.

How do u order the box and pay. Because I live n Austin tx but need a box built. Also I have a 2001 impala but I dnt know how many cubic feet I will be able to put n my trunk

Hello there, wanting to know the price for a slot ported enclosure for an FI 12" Q series sub to their dimensions? You can contact me at [email protected]. Their recommendations are; 12” Q ported enclosure 2.35 cubic feet @ 32Hz

Is bj still doing business? Last post I seen was 2010

Yep. Still building for SSA. Enclosures are listed on their site. Let me know if you need anymore info.