OK, so I need some help on strapping amps. I

you need Dual 2s and get a maxxlink should make the strapping much easier especialy with 4 amps

not going to happen, you'll either need to give them half the potential power you have available (2 ohm) or run them at 1/2 with some beefy electrical

or find some used 3000's or recone the BL's (or sell them and buy the correct ones)

you need Dual 2s and get a maxxlink should make the strapping much easier especialy with 4 amps

Yeah thats what I was thinking. I might just wait on some 3000Ds then. Still have to start on the build anyways. Ill be looking for a low to mid 50s from this setup so im going to take my time and do it right.

when you strap, the lowest rated impedence doubles. So if you have two 1 ohm amps and strap them they become a single 2 ohm amp together.

when you strap, the lowest rated impedence doubles. So if you have two 1 ohm amps and strap them they become a single 2 ohm amp together.

Got yeah. Thanx mayne!

I still think that 4 1500ds at .5 ohms will be louder than 2 3000ds at 1 ohm each... I have run strapped 1500d's at 1 ohm final load before (.5 ohms per amp) on a STOCK electrical system and Jacob's amps are solid.