Hopefully by the end of the week I should have all of this finished:

Painted calipers w/ Chrome Camaro SS decals on them under some clearcoat.

Silver face MacEwen Gauges w/ Trans am bezel and a SS emblem by the tach.

Blue led bulbs behind the instrument cluster, in the steering wheel remote, in the lighting for the door switches, in the ash tray, behind the hvac controls, behind the light controls, and behind the fog light switch

Smoked side marker and corner lenses via nightshades

Taillight Blackouts Installed

Cutout and subframe connectors installed.

Shift light installed

Hopefully by the end of the week I should have all of this finished:

Painted calipers w/ Chrome Camaro SS decals on them under some clearcoat.

Silver face MacEwen Gauges w/ Trans am bezel and a SS emblem by the tach.

Blue led bulbs behind the instrument cluster, in the steering wheel remote, in the lighting for the door switches, in the ash tray, behind the hvac controls,  behind the light controls, and behind the fog light switch

Smoked side marker and corner lenses via nightshades

Taillight Blackouts Installed

Cutout and subframe connectors installed.

Shift light installed

<{POST_SNAPBACK}>

Very nice, makes me wish I still had my maro

I might even fab up an ash tray switch panel for my cutout and my orion bass knob that I am about to make. I found a thread on termpro on how to make it and I went to ratshack yesterday and got the parts for like 10 bucks.

Hopefully by the end of the week I should have all of this finished:

Painted calipers w/ Chrome Camaro SS decals on them under some clearcoat.

Silver face MacEwen Gauges w/ Trans am bezel and a SS emblem by the tach.

Blue led bulbs behind the instrument cluster, in the steering wheel remote, in the lighting for the door switches, in the ash tray, behind the hvac controls,  behind the light controls, and behind the fog light switch

Smoked side marker and corner lenses via nightshades

Taillight Blackouts Installed

Cutout and subframe connectors installed.

Shift light installed

<{POST_SNAPBACK}>

Very nice, makes me wish I still had my maro

<{POST_SNAPBACK}>

It's gonna look sweet when its done. I have most of the gear over here if yall want some pics.

Then soon in the future my headers will get put on.

Thank God for scholarship money

So thats why you are selling all of your old stuff. 4 9915's... Nice.

What will be powering those beasts?

<{POST_SNAPBACK}>

I'm only going to be running Two. I've got an Orion 2500D @ 0.5 nominal for Each One. Wangage.

Nick do you have any bigger pics?

<{POST_SNAPBACK}>

Sadly no... the mrs. has our digi-cam in Texas. She's visiting her folks.

So thats why you are selling all of your old stuff. 4 9915's... Nice.

What will be powering those beasts?

<{POST_SNAPBACK}>

I'm only going to be running Two. I've got an Orion 2500D @ 0.5 nominal for Each One. Wangage.

Nick do you have any bigger pics?

<{POST_SNAPBACK}>

Sadly no... the mrs. has our digi-cam in Texas. She's visiting her folks.

<{POST_SNAPBACK}>

So you have 2 spares? Sounds nice too.

That sucks about the digi cam. Oh well.

okay, I dug up some boxes... I've gotta print off some UPS slips.

I might even fab up an ash tray switch panel for my cutout and my orion bass knob that I am about to make. I found a thread on termpro on how to make it and I went to ratshack yesterday and got the parts for like 10 bucks.

<{POST_SNAPBACK}>

HCCAfan is selling the knobs for about the same price I think, Check the classifieds

So thats why you are selling all of your old stuff. 4 9915's... Nice.

What will be powering those beasts?

<{POST_SNAPBACK}>

I'm only going to be running Two. I've got an Orion 2500D @ 0.5 nominal for Each One. Wangage.

Nick do you have any bigger pics?

<{POST_SNAPBACK}>

Sadly no... the mrs. has our digi-cam in Texas. She's visiting her folks.

<{POST_SNAPBACK}>

So you have 2 spares? Sounds nice too.

That sucks about the digi cam. Oh well.

<{POST_SNAPBACK}>

Yea, sort of. They are for sale as well. I had the motors, had to get them reconed, so i had them all done at once.

I was thinking about running (4) 12" 99's, but 5kw just wouldnt be enough for (4). So, here I am. LoL

Hopefully by the end of the week I should have all of this finished:

Painted calipers w/ Chrome Camaro SS decals on them under some clearcoat.

Silver face MacEwen Gauges w/ Trans am bezel and a SS emblem by the tach.

Blue led bulbs behind the instrument cluster, in the steering wheel remote, in the lighting for the door switches, in the ash tray, behind the hvac controls,

I might even fab up an ash tray switch panel for my cutout and my orion bass knob that I am about to make. I found a thread on termpro on how to make it and I went to ratshack yesterday and got the parts for like 10 bucks.

<{POST_SNAPBACK}>

HCCAfan is selling the knobs for about the same price I think, Check the classifieds

<{POST_SNAPBACK}>

His are $35. Plus I already bought all of the stuff

Hopefully by the end of the week I should have all of this finished:

Painted calipers w/ Chrome Camaro SS decals on them under some clearcoat.

Silver face MacEwen Gauges w/ Trans am bezel and a SS emblem by the tach.

Blue led bulbs behind the instrument cluster, in the steering wheel remote, in the lighting for the door switches, in the ash tray, behind the hvac controls,  behind the light controls, and behind the fog light switch

Smoked side marker and corner lenses via nightshades

Taillight Blackouts Installed

Cutout and subframe connectors installed.

Shift light installed

<{POST_SNAPBACK}>

Very nice, makes me wish I still had my maro

<{POST_SNAPBACK}>

It's gonna look sweet when its done. I have most of the gear over here if yall want some pics.

<{POST_SNAPBACK}>

Yes we want pics what r u thinking

<{POST_SNAPBACK}>

Let me go dig up the digicam

I might even fab up an ash tray switch panel for my cutout and my orion bass knob that I am about to make. I found a thread on termpro on how to make it and I went to ratshack yesterday and got the parts for like 10 bucks.

<{POST_SNAPBACK}>

HCCAfan is selling the knobs for about the same price I think, Check the classifieds

<{POST_SNAPBACK}>

His are $35. Plus I already bought all of the stuff

<{POST_SNAPBACK}>

Well excuse me

Denim either has a long ass post or he forgot to finish it

I cant get on CA.com think the server is acting up

Ok here we go.....

First up we have a shift light. Going to be adjusted to 5700 RPM's and it will either be in my middle a/c vent or in my drivers side A pillar in the defrost vent. It all depends on what I feel like doing.

Whats up denim?

n/m just checking in,

if you want me to change your user name, and maybe your banner, PM me the name as you want it, and a new picture for me to use

Next up we have a cutout and an electric controller. This will be wired to a switch so I can have open headers on command.

Next up we have the silver face gauges and bezel. These will go over my old ones giving everything a silver look.

Moving along we have all of the equipment to make my bass knob, and the blue led's from superbrightleds.com for my gauges.

Here are my EMNB disks from GM on sounddomain.com. They are pretty awesome. And for $6.50 you can't go wrong.

Here is my TV, PS2, DVD collection, PS2 Game collection, and Klipsch RC-35 Center Channel