I'm looking for a jumping off point for a box size.

If someone would be able to help me out that would be great.

It's going into a S10 extended cab.

i believe it is a 1.5 @ 33-35hz! if that helps! (i think ppl like to tune it at 35hz though)

Really? that small eh.

Thanks, it gives me somewhere to start.

Yes, they like SMALL boxes.

Specs come in the box?

I'm expecting to get home and open up a box containing a NightShade.

I'd really like to get cracking on the enclosure for my customer.

Specs come in the box?

I'm expecting to get home and open up a box containing a NightShade.

I'd really like to get cracking on the enclosure for my customer.

spec come in the box? like the specs i gave your? 1.5 @ 33-35hz?

and if you purchased a used motor sub i don't think you will get specs, i didn't get any specs in the box. hope this helps!

I bought a new driver

It's for a customer

He wants a spec'd box, not something I design

What is a good alignment for an S-10 Pick-up?

I'm thinking sub up and port out the passenger side, thoughts and suggestions welcome

Edited June 1, 200916 yr by SeductiveSounds

I think a lot of extended cabs like subs forward port up as well.

My 12's in 4 cubes are fantastic! Tuned to 35 hz. with 62 sq. in. of port.

My 12's in 4 cubes are fantastic! Tuned to 35 hz. with 62 sq. in. of port.

What amp do you have on them again? Have you gotten a chance to get metered yet?

My 12's in 4 cubes are fantastic! Tuned to 35 hz. with 62 sq. in. of port.

What amp do you have on them again? Have you gotten a chance to get metered yet?

SAZ-3000D. No I haven't metered them yet.

I bought a new driver

It's for a customer

He wants a spec'd box, not something I design

What is a good alignment for an S-10 Pick-up?

I'm thinking sub up and port out the passenger side, thoughts and suggestions welcome

If you are using the whole Ext cab I would wedge it top firing port. If it has a solid back window