I'm not telling

Looks like the pole for the NS-X to me

Not quite!

Not quite!

No? The big boy perhaps?

Its a lathe, with some type of metal being turned.

it looks like a lathe with a pice of 6inch cold rolled (or hot rolled) steel being turned down! and it looks like a nice carbide cutter and parting tools were used!

Edited June 5, 200916 yr by CrazyKenKid

The steel hunk was originally about 9" in diameter

Raise's hand ...i know

Looks like the start of pole/bottom plate for a prototype.

Looks like the start of pole/bottom plate for a prototype.

Indeed.

Looks like it's going to be one big motor!

Some new 8 inch goodness????

The motor is more than 8" across - so no

I will say that picture was taken right down the road from our shop at a local machine shop

down the road sounds like ''readily available'' to me

4 in coil?

The motor is more than 8" across - so no

The only thing that means is you have to either cut a whole moun the basket then attack the motor after OR invert the sub thats all.

Your gonna send me 2 in an 18" d1 for me to test, right?

It's a bandusboobusnarflak!

It's a bandusboobusnarflak!

I know

Man I will tell you EXACTLY what that is......... it is......... Click here for info

But for real, I know what it is. I'm not telling

Whatever it is may be ready for testing in 4-5 more weeks.

Pack it good. I wouldnt want the 1st prototype to be damaged before it even gets to my house.

Whatever it is may be ready for testing in 4-5 more weeks.

When could I get 2 15"s maybe?

I'm already investing in Entergy Power Company.