We have been using a plastic domed pole plug for our cooling option for some time now.

I decided to take a new route and these will be shipping as of orders placed today and beyond. They were made down the street here in Troutman, NC

Solid aluminum plugs!

The shape is a bit more aerodynamic than the old plug as well:

Also, being aluminum, the plug itself will soak up some heat.

Very nice

What is the power you can safely recommend with this option? Is it an option? Do ALL new ones come with?

Starting today it is standard on all drivers.

I'll be sending one of my Nightshades in for a recone and cooling

It will not fit original motors - the pole is a bit too small. We CAN add the plastic plugs to any generation motor and they work quite well anyway as we have used a few 100

It will not fit original motors - the pole is a bit too small. We CAN add the plastic plugs to any generation motor and they work quite well anyway as we have used a few 100

Jake, you told me to wait for the aluminum plugs then send them in for upgrades

If your motors are not the very first run they will fit. I am assuming if we talked about it they are not that old ?

If your motors are not the very first run they will fit. I am assuming if we talked about it they are not that old ?

I got them before you started making them in house. For $285

Hmmm... the aluminum may not fit then. If you *really* must have them I can probably get them machined down a bit.

woohoo i got the first set!! eat your hearts out!!

Indeed First two built with the plugs - picked up today!

Might someone explain to me why you would want to plug that hole?

Re-directs air flow behind the former for better cooling -- a pole vent by itself is not a very effective cooling method.

You may notice on the Fi subs the BL and BTL have no pole vents,

Hmmm... the aluminum may not fit then. If you *really* must have them I can probably get them machined down a bit.

Jacob that would be great! I have calipers I can measure the inside diameter of one? What's the dimensions of your plugs?

33mm -- I have a few old motors here and they just barely don't fit.

everytime i see a picture of a nightshade i fall in love with them

those things are beasts

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

iI placed my order just yesterday is there any chance it will come with this option?

iI placed my order just yesterday is there any chance it will come with this option?

Starting today it is standard on all drivers.

Finally got them made.. looken good man!

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

Jacob said he would make some a little smaller for me

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

Jacob said he would make some a little smaller for me

That's going to cost Extra.....

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

Jacob said he would make some a little smaller for me

That's going to cost Extra.....

Mayb mayb not