oh. i like it here better anyway....now back to the SA-8 pre-sale!!!!!!

Yeah, not we continue to wait for them (the SA8's )

Yeah, not we continue to wait for them (the SA8's )

Yeah im waiting for 4 also. i bought some 12 inch Qs just to tide me over. the REs are 'bout to blow!!

Yeah im waiting for 4 also.

ME TOO.

The jasper jig came yesterday.

Jacob using the info from the first page:

5.25" depth

8.25" overall basket OD (no gasket)

7.375" cut-out diameter (without gasket)

7.25" cut-out diameter (with gasket)

I want to flush mount them 8's the inside hole is ?

7.25?

And the outside counter sink is? ???

I would like to completely finish these boxes and I need to know for sure before I cut.

Thx

Soapbox

Okay so i have four on order and i put down for D1 coils , i already have my SAZ-2000D and i'm wondering if I should run it on 2 ohm or 1 ohm for my daily setup.

What Kind of power will the 2000d actually produce at 2 ohms? since its obviously underrated. Could the four sa-8's handle the power from the 2000d at 1 ohm ?

And also I have a 200 Amp alt and and a yellow top

Four will handle the 2000D @ 1 ohm

Okay so i have four on order and i put down for D1 coils , i already have my SAZ-2000D and i'm wondering if I should run it on 2 ohm or 1 ohm for my daily setup.

What Kind of power will the 2000d actually produce at 2 ohms? since its obviously underrated. Could the four sa-8's handle the power from the 2000d at 1 ohm ?

And also I have a 200 Amp alt and and a yellow top

Wont 4 speakers with Dual 1 coils make .5 ohms, 2 ohms, or 8 ohms??

Wouldnt you need Dual 2 coils or Dual 4 to get 1 ohm load?

Edited February 19, 201015 yr by stevemead

You would be correct sir!

You would be correct sir!

hope jacob caught that. i dont think he wants to run.5 ohms

Got my order in How would these sound inverted ? i think im going to invert it my box is going to be .85 cuft 3" aero port tuned to 34

Can anyone answer me please?

5.25" depth

8.25" overall basket OD (no gasket)

7.375" cut-out diameter (without gasket)

7.25" cut-out diameter (with gasket)

I want to flush mount them 8's the inside hole is ?

7.25?

And the outside counter sink is? ???

I would like to completely finish these boxes and I need to know for sure before I cut.

Thx

Got my order in How would these sound inverted ? i think im going to invert it my box is going to be .85 cuft 3" aero port tuned to 34

You may hear some noise from the air cooling inverse mounted -- depends on how close they are to your listening position.

Can anyone answer me please?

5.25" depth

8.25" overall basket OD (no gasket)

7.375" cut-out diameter (without gasket)

7.25" cut-out diameter (with gasket)

I want to flush mount them 8's the inside hole is ?

7.25?

And the outside counter sink is? ???

I would like to completely finish these boxes and I need to know for sure before I cut.

Thx

You're correct about the cut-out (inside) hole, 7.25". The outside hole will be over 8.25" if you're going to use the gasket, go 8.5" or even 8.75" for that I'd imagine.

On the countersink, how thick is your baffle going to be? I think most cast frame gaskets are about .5" tall, I"ll go measure my Q's real quick and let you know for sure.

Thanks Alton

Baffle is 1 3/8

Okay so i have four on order and i put down for D1 coils , i already have my SAZ-2000D and i'm wondering if I should run it on 2 ohm or 1 ohm for my daily setup.

What Kind of power will the 2000d actually produce at 2 ohms? since its obviously underrated. Could the four sa-8's handle the power from the 2000d at 1 ohm ?

And also I have a 200 Amp alt and and a yellow top

Wont 4 speakers with Dual 1 coils make .5 ohms, 2 ohms, or 8 ohms??

Wouldnt you need Dual 2 coils or Dual 4 to get 1 ohm load?

Thanks for catching that steve mead , i did notice that i would need dual 2s but at first i planned on running 2 ohm load but now that im thinking again i realized there are only d2 and d4 coils available so idk what i was on when i said d1s in the first place haha sorry guys im sure i put down for d2s

Were all here to help each other out. may want contact jacob and double check and maybe change coil configuration if necessary/possible

Supposed to hit Charlotte on the 5th, they go from there to me... so if all goes smooth I should be able to at least start shipping them before I got to SBN.

I'll be waiting very impatiently

LAST DAY to pre-order !!!

I've been following this thread for awhile and decide to sign up. Can't wait any longer for the sa-8

I've been waiting for a couple months now without subs I know it will all be worth it though

boy this wait is killing me

How long after the subs arrive before they start shipping to us?

I ordered 4, can you through in 2 shirts and a sticker in one of the sub boxes to save on shipping.