February 23, 201015 yr Author how are you attaching the fleece to the a pillar cover? ive wondered how to do that for a while nowx2, that is what i am using
February 24, 201015 yr Author just sanded with 60 grit and its coming together, there still is a couple certain spots where its not totally smooth so i will go back and fix those upI would say probably one or two more coats of filler and sanding should do itthis pic has alittle too much light but you get it the picturestill gotta buff out some spotseither tonight i will apply the third coat or tomorrow morning, but most likely tonightLETS GET THESE FINISHED!
February 24, 201015 yr Author 3rd layer applied and is in the dryin process, i pulled out the finished one and found a couple flaws that i need to fix but shouldn't be too much of a problem. Overall they are getting closer and closer but i just need to remember to take my time or else i won't like the finished product. But i just want to get them finished before spring comes which is RIGHT AROUND THE CORNER! but i am still in need for some rear components, any ideas?? i am looking for a well round speaker that will out due my bose which i have right now. I really want to go with the AA carbon fibers but still up in the air.more pics coming tomorrow...break out that popcorn
February 24, 201015 yr This is looking real good Mac N Cheese I'm still here waiting for final product... Hawk
February 24, 201015 yr Author This is looking real good Mac N Cheese I'm still here waiting for final product... Hawkquite alot of bumps in those pictures, but don't worry i just put a smooth coat...
February 24, 201015 yr Author thanks Hawk... i want to see the finish too, but i am making sure to take my time
February 24, 201015 yr Author this blue SSA theme is starting to grow on meohh shit....sorry about that nonsense, the last coat is dry and just got done hand sanding it and looks MUCH better than before, pulled out the one that was finished and patched a couple spots and re spray painted it and it will be done by tomorrow.As for the passenger one, i will sand it again tonight and go from there
February 24, 201015 yr Author Wow just hand sanded again with 60 grit and it's SUPER darn smooth now. I added one more coat to finish it off. Pretty sure it will be complete tomorrow and sprayed tomorrow also.
February 24, 201015 yr Author Hah I hear ya. Alright so I just sanded once again and looked complete till I ran into a small section where i could feel the fiberglass underneath. So I put a heavy layer of filler over it and smoothed it out. I will let that dry till tomorrow morning and then go from there
February 24, 201015 yr Author It's simple mathmatics how i get those percentages...lolJust got done spraying them, and one is still in the prcess of drying and will be ready soonthey look MUCH better when installed, will be putting them in later today and pics will be includedStill wet98.26% completed
February 24, 201015 yr you should do a little step by step guide on how to fiberglass. ( i couldnt fully grasp it from the thread) thanks bro!
February 24, 201015 yr Author you should do a little step by step guide on how to fiberglass. ( i couldnt fully grasp it from the thread) thanks bro! yeah i could do that
February 24, 201015 yr if you put that body filler under a incandescent lamp/light bulb it will firm up in about 5 minutes because it is light sensitive.
February 24, 201015 yr Author .... Looking good there and almost finished... Hawkthanks, yeah one is completed and sitting here right next to me, now i just got to wait for the other to dry
February 24, 201015 yr Author if you put that body filler under a incandescent lamp/light bulb it will firm up in about 5 minutes because it is light sensitive.yeah i did notice that when i had it in my screen room and the sun was beaming on it and it became solid in a couple minutes.But i am waiting on the textured spray to dry, it's out in my garage right now, but i am going to bring it in the basement
February 24, 201015 yr Author Alright still waiting on the spray paint to dry, taking FOR EVER (quote from movie: Sandlot) hahahagetting ready to go to work and tomorrow i have school ALL day so i will be back either tomorrow night or friday morning to get these done and pics upSTAY TUNED
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.