I usually am used to seeing boxes with the shape of a port like a L, but the box was to be tuned to 32 hz and is missing the piece of wood that is found behind the cutout usually... what is wrong here?

pics?

real description?

Confucius say post pics!

The port wall is missing.

Are you saying it is suppose to be like L but is like l ? or is it like _ and is suppose to be like this L?

we need pictures to fully grasp what you are saying.

Edited March 19, 201015 yr by BanginGMC

x2 on all three lol.

No pics for tonight but it goes like l instead of the typical L I''m used to seeing.

Nothing out of the ordinary other than it's in the design and desired tuning frequency.

The port doesn't have to be an L shape. It can be an " I " if that is all the length needed to get the tune you need.

^^^^^ This exactly

Try typing the specs in the calc and see if the tunning is to 32hz. RE Enclosure Calculator

^^^^ Not the most accurate enclosure design.

^^^^ Not the most accurate enclosure design.

I know, but it will be close enough for him.

- I PMed ya.

Used the calculator, and my box looks nothing close to 32hz.

The box isn't really big enough for the lack of a L and just being l shaped port, due to the box being so small

The box isn't really big enough for a straight port...maybe I'm wrong.... I thought tune would have been off.

I don't think your understanding, if the vent is long enough to achieve tuning without having a bend it will be straight. The ONLY time there is a bend in a vent is when there isn't enough room available to achieve tuning.

Instead of wasting time using letters to describe the shape you think the port should be, how about you tell us the actual dimensions of your enclosure and the dimension of the port? That way we can calculate the actual enclosure volume and tuning of your enclosure.

Seems a little more productive, don't you think?