Jump to content
View in the app

A better way to browse. Learn more.
SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

BTL Wiring Size

BTL15
in Fi Technical

Featured Replies

Posted

I currently have a fi btl 15 fully loaded and i planed on using knu konceptz 8 gauge speaker wire but when i tried to wire the sub up the wires were too big haha...so is there anyway i can make the wires fit ive looked at banana clips and wire reducers but i dont know what to use and if it will distort or loose power

Cut some wire off or use smaller gauge. When I had 8 gauge in my SSDs, I had to cut quite a bit off to fit knu 8 gauge.

Cut some wire off or use smaller gauge. When I had 8 gauge in my SSDs, I had to cut quite a bit off to fit knu 8 gauge.

x2, smaller wire will work as well since you dont really need 8 gauge for subwoofers.

  • 1 month later...

i used a 10 guage on mine and it was beautifule to work with

12 gauge works just fine, no need to break the terminal forcing so much wire in.

I would use 12awg for anything up to 1,500rms. 10awg for up to like 2,500. and 8awg up from there.

Since it seems that you already have the wire, just cut strands off.

I put 4/0 on my tweeters yo!

Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.