Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

So I recently posted this thread about the continuous power of the ZED Leviathan amp powering the Image Dynamic CTX65CS comps.

I'm on a roll ... - SSA Car Audio Forum

I am satisfied to know that the ID comps will run fine with the ZED amps RMS power.

I however didn't think about the power handling capability of the SSA DCON 12S4. That sub is rated at 300w RMS and the ZED amp puts out 600w continuous power bridged.

Sooo ... will the DCON 12S4 sub be OK with the 600w continuous power that the ZED amp will be feeding it?

I'm pretty sure I know the answer to this BUT I just want to make sure. Headroom right?!

THANKS!

:fing34:

  • Author

turn it down and it also depends on your box.

Box built to SSA specs for OPTIMUM Ported design for 12" DCON.

  • Admin

So I recently posted this thread about the continuous power of the ZED Leviathan amp powering the Image Dynamic CTX65CS comps.

I'm on a roll ... - SSA Car Audio Forum

I am satisfied to know that the ID comps will run fine with the ZED amps RMS power.

I however didn't think about the power handling capability of the SSA DCON 12S4. That sub is rated at 300w RMS and the ZED amp puts out 600w continuous power bridged.

Sooo ... will the DCON 12S4 sub be OK with the 600w continuous power that the ZED amp will be feeding it?

I'm pretty sure I know the answer to this BUT I just want to make sure. Headroom right?!

THANKS!

:fing34:

Simply. No. 600 is way to much for the dcon. It's super efficient around 300-350 w RMS. :drink40:

  • Author

So I recently posted this thread about the continuous power of the ZED Leviathan amp powering the Image Dynamic CTX65CS comps.

I'm on a roll ... - SSA Car Audio Forum

I am satisfied to know that the ID comps will run fine with the ZED amps RMS power.

I however didn't think about the power handling capability of the SSA DCON 12S4. That sub is rated at 300w RMS and the ZED amp puts out 600w continuous power bridged.

Sooo ... will the DCON 12S4 sub be OK with the 600w continuous power that the ZED amp will be feeding it?

I'm pretty sure I know the answer to this BUT I just want to make sure. Headroom right?!

THANKS!

:fing34:

Simply. No. 600 is way to much for the dcon. It's super efficient around 300-350 w RMS. :drink40:

SO instead of the SSA DCON 12S4, I should get the SSA DCON 12D4 and wire it in SERIES and then the ZED amp would see a 8ohm load and give it a continuous 300w as stated in the manual. Right?!

  • Admin

It would be a better choice to run it at 8 ohm mono, no need to over drive the sub woofer with double it's ratting for a daily install. So yes, the dual 4. :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.