hey guys im deciding on what to get in my setup but i was wondering about the Audioque AQ2200D i was thinking of running two of these with 2 FI BL 15s. on the audioque site it says if your not careful you might burn a coil or fold a cone ... i know the FI subs are tough but how do you think they will go.

Thanks

Set your gains accordingly do not use bass boost.....and don't do anything dumb.

hey guys im deciding on what to get in my setup but i was wondering about the Audioque AQ2200D i was thinking of running two of these with 2 FI BL 15s. on the audioque site it says if your not careful you might burn a coil or fold a cone ... i know the FI subs are tough but how do you think they will go.

Thanks

LOLOLOLOLOLOLOLOL

Agreed with Julian... I doubt that you will burn a coil or fold a cone with that amp on a pair of BLs. Granted if you do everything possible in your setup wrong... you could damage things. But 90% of the time it is due to overexcursion from improper subsonic filter settings vs enclosure tuning. I cant remember the last cone fold we had. Maybe Mike Bartells extreme vehicle 3 years ago?

Should be an easy match for the subs with the right enclosure and settings.

Thanks,

Scott

You want to use one 2200 watts amp to each BL.

That's a lot of power if it's at 1 ohm. BL's are rated for 1000 watts rms, aren't they ?

One AQ 2200 seems to be enough for a pair of BL's.

It's REALLY hard to fold a pulp cone, you have to be using gargantuan amounts of power or have settings incorrect.