Posted December 27, 201014 yr Well im getting closer and closer with more boxes arriving at my door. So far i have my...Fi Bl 10" Fully Loadedmy Sundown Audio SAE-1200D V.2and some Mb Quart PVI 216 Components.getting pretty excited and thanks for all of you who chimed in and helped with the sub and amp questions. all i need is my custom box to be made. (im gonna try to make my own and ill def post pictures. as well as ask questions about that so help will be needed. haha) need to buy lots of 0 gauge wire for my big 3 and for other parts of the installation of course.need to get some second skin or dynamat or whatever i find better when the time comes. as well as maybe some components or just some normal speakers for the rear.here are some pics of what i got so far!Thanks for looking! Ill try to update as fast as i can on everything!
December 28, 201014 yr Author Whats this going in?oh sorry forgot to add that. its going in a 2001 Ford Supercrew
January 3, 201114 yr nice equipment. I have a Fi BL 12" and a Sundown SAZ-1500D and I love em. Sundown and Fi make great stuff and go the extra mile with customer service. Enjoy
January 13, 201114 yr Author my box is built! ill get some photos up tomorrow for day time pics. it turned out great!! just not sure if the port size is correct....for giggles i hooked my old amp to the sub for now. its def not tuned correct at all. it starts to clip i think at high volume so i try not to really play the sub at all. sounds great for what i have to it though. cant wait for the real amp to power it up!!
January 21, 201114 yr Author ive been bad with pics, but i got just about everything installed yesterday! just going to add my stinger volt meter, finish tuning, add new terminals and a just tuck wire away.any advice on the volt meter and most of all TUNING?? haha. ill get a boat load of pics up tomorrow of how everything turned out!!
January 21, 201114 yr (Assuming you have a Stinger volt meter?) Grab a dmm and check your idleing voltage. It will be somewhere in the 14's, then take off the front face and there will be a small dial that can move the voltage up or down. Just match it with the same voltage coming from the dmm. Tuning: SSF tune a couple Hz below your enclosures tuning, no bass boost, the LPF is a personal preference, and the gain I would set accordingly.
January 22, 201114 yr Author thanks mac n cheese!!well. i got my stinger volt meter hooked up and i somewhat got the sub tuned....but realized theres leaking right around the terminal cup. SOOO i ripped some carpet up and added more silicone. gonna wait a couple days for it to dry to be extra safe. put A LOT. haha. here some pics of atleast the sub box. ill get some day time pics of the components and everything aswell!! im getting there!! WOO!! lolthanks for looking!! Edited January 22, 201114 yr by Havasufreak
January 22, 201114 yr Sexy sub. Was going to get aset of those components last year but was persuaded to the dark side and got some Eminence 6a's. Good lookin comps, would like to still give them a try sometime.Mad props on building your own box. I am not carpentry inclined in any sense. So I let BassHeadsEnt.net take care of mine. In for vids.Checkout my build log if you get a chance. Thanks.
January 23, 201114 yr Author yea the components sound great! i added a bit more silicone to the sub box so ill have everything in soon! still wanna mess with my tuning a bit before i put the backseat in. (cant get to the amp with it in) here some pics i promisedheres my amp rack on the back wall of my truckturned out pretty well i thinkand ill have this all filled up soon with my seats and sub. cant wait to get this box dry!!thanks for looking!!
January 25, 201114 yr Author ok. so i added the sub back in and the tuning is going alright. just the angle of the box has me concerned. let alone im curious how big the areo port needs to be? i have a small feeling its not the correct size and choking the sub.any help would be great!!whatever questions you need to ask would be great in order to help me out!thanks!!
January 25, 201114 yr Author ok so i believe my sub box is about 1.08 cuft or very close to that. if i was to add this kit here... http://www.madisound.com/store/product_info.php?products_id=711you think that would fit my application? in order to get 34hz with a single 3" inlet im going to need a "13.06364" long tube. if i got this kit i could cut it to length?what do you think?with a box of that amount of cuft do you guys think i should tune to a different setting aswell? let me know what you think!!
January 30, 201114 yr Dude nice setup. Its coming along good. You are going to be very pleased with that BL. It packs a punch for such a little sucker. By the way which South Bay are you in LA or Frisco?
January 31, 201114 yr Author Thanks RXdriver11!!Im in the Southern California LA area.this build would be going a lot quicker if my port would hurry up in the mail! haha
February 8, 201114 yr Author so i had to go with a 2" flared port kit from precision. i was kinda worried about if the sub still wouldn't get enough air. damn was i wrong. this little 10 POUNDS. very happy with everything. i still need to tune and tweek a bit more power outta the amp. cant believe the sub should get a lil louder!Rxdriver11 has offered to help me with his o scope as well. so im very happy about that and thank him again!! ill go take some pics now of how everything looks! still need to put all my interior and seats back in! Edited February 8, 201114 yr by Havasufreak
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.