Long time no see.

Gonna bring you up to speed on a current project I have going on. It's an 07 Silverado xcab on 24s.

I am putting all Crescendo in this where I can.

Currently has a wall for two 18s but I believe plans for that have changed. He is talking walk-thru. He has 8 DC Lvl5 15s and getting more. But thats the future.

Anywho, lets get some pics up.

Remember this pic?

Turned them into something worth looking at.

Inserts for the doors made by Toolmaker.

Some of the console

The console is actually 6 pieces. The base, the top section to hold the EQ, the padded armrest piece, 2 speaker inserts and then the slide in crossover.

A-pillars were planned to hold two 5.25 and tweets. But they were just to big. Especially on the drivers side.

Went with 4 tweeters instead. Soft domes so they don't over power your senses.

Maybe some more pics later on. If anyone cares.

Very nice. Love your work. Putting the pro mids in there?

Very nice. Love your work. Putting the pro mids in there?

Yes. The 10s.

The console will have the only super tweeters on a switch so they don't overpower you.

Looks Excellent!!! Can't wait to see the finished product!!

Excellent job!

That's a lot of fiberglass! Have any pics of the truck?

it would have been cool to do some 3" soft dome mids, in the a pillars with one tweeter arranged in a MTM config. just something not seen everyday.

Always love when you post your work here Jon.

Looks Excellent!!! Can't wait to see the finished product!!

Thanks.

I can't wait to get done with it.

Excellent job!

Thanks sir.

That's a lot of fiberglass! Have any pics of the truck?

I don't. But I should.

I'll try to get some up before the weekend.

it would have been cool to do some 3" soft dome mids, in the a pillars with one tweeter arranged in a MTM config. just something not seen everyday.

I considered some from 2" to 4", but couldn't justify doing them cause I am sure they would just end up blowing. After considering that they would have to be toned down to not blow, whats the point of them being there anyways? If this was more towards an SQ build, sure. But this is just a get loud and do your best staying clear build.

Always love when you post your work here Jon.

Thanks man.

I get side tracked alot with different forums so I will go thru spurts with each one. I like this one and should try to hang out here more often.

Once I get this truck done, I have a small side project to knock out and then I am taking the 2nd half and all of October off for the haunt.

I will be making a thread on that soon BTW. I invented something that I might try to market to haunters. So far it had been well recieved.