Posted January 24, 201213 yr The following build log will consist of the following equipment:2 SSA Xcon 10'sSaz-3500dIncriminator Audio 6.5 Coax's Sax-50.4 Pioneer Bt3200DVD Head UnitBox is a 3.0ft^3 @ 30hz enclosure.2 XS D3400's All knukonceptz wiring and Rca'sI hope to have pictures of everything up very soon. It's about time to get things started.
January 27, 201213 yr Curious on where you're gonna put the box. My wife drives one of these and short of taking out a seat, I can't find a good way to get a decent size sub and box in there.
January 28, 201213 yr Author Curious on where you're gonna put the box. My wife drives one of these and short of taking out a seat, I can't find a good way to get a decent size sub and box in there.Fold seats down, box on top.
January 28, 201213 yr Author Here is the truck that it is going in.This is where the box and battery box will be going.Head Unit is in.Wires are ran.This is the start of the battery box, very simple as all it is is a rectangle. It will be carpeted black.
January 28, 201213 yr I hate 2nd gen explorers in regards to their dash. A simple pull and the whole thing can be taken, plus a lot of wiggle with heavy bass, at least wit my old shit.
March 13, 201213 yr Author So I haven't been very good with updating this thread, have been working but anyways... So far I have all the electrical done, the Incriminator Audio Coaxial's have been put in along with the sax-50.4 has been bridged and put in. The speakers sound pretty good in my opinion. I can't really compare them to anything but my stock ones, and they blow them out of the water in terms of sound quality and volume. I'll get picture of them up in a little. The enclosure for the xcons should be coming in late this week or early of the next week. It was made by TRP and can be found in his section. Battery box is complete and wired up. All I need to do is add the boc and subs and it pretty much should be complete for functionality. I have plans to make everything look good but for now I'm getting everything in and working.
March 27, 201213 yr Author SOOO, I got the box in, aside from it being packaged VERY WELL a tad damage from fedex which irks me a little, but has no effect on the performance of the box because its just on the very end of the bottom of the port. As of right now while the battery box is being line-x'd I have put in the 3500 and will be wiring to 4 ohm until the batteries are in. Enjoy.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.