March 17, 201510 yr Author oh no....Amp will be under the back seats. The rear stays pretty dry, but water does get in occasionally. bout to get back to work...
March 18, 201510 yr Author Made amp stands. Got hardware to attach them to the truck. getting close to the nerve racking time of gutting holes to run wire. I have never done that. Didn't get near as much as I wanted done. But kids are out of school, hard to get alot done chasing 3 boys around.lol not looking good for being playing by friday... fitting boards, and checking clearances. I have about a fingers width of clearance on the 5500- mocking up
March 18, 201510 yr Looking good! It's definitely hard to get much done during spring break. The kids definitely eat up a lot of time, but it's worth every second!
March 18, 201510 yr love that color avy cresendo amps match really good with it lol. im planing mine out right now for my avy so im definately got a huge intrest in this build. im thinking about that same bc5500 and 1100.4 different subs, enclosure, tune, mids n highs tho. box looks great keep up the good work
March 19, 201510 yr Author Jason - I had a 1100.4, but traded around and got the MUCH smaller Symphony 4 channel. The 5500 ans 1100 woulda been wider than I wanted to mount under seat. Be sure to post a build log! BTW- I had the Crecsendo 3500 and 1100.4 before buying the Lanche...looked specifically for this color for that very reason.LOL Roger that Alton! I was trying to get in 3 hrs a day in on the truck while they were here. Today was a total waste...when drilling to mount the amps today- I realized that my gas tank is under the outer edge of the driver side rack. that's where I decided to back up and punt. thinking about cutting the carpet and epoxy bonding the feet to the metal. Also- anyone can tell me how to wire in the 4 pin alternator? internally regulated, dedicated to my battery bank. Edited March 19, 201510 yr by Leedogg
March 20, 201510 yr Author I got an email from Singer at 2:00 this morning.LOL. He said the S goes to battery bank, and L to keyed power. the other 2 are not used. Leving for Daytona early tomorrow- so I am done til we get back....well, I am gonna throw the Pioneer back in it today. Finally got the amps in and secure. Took way too long to get this step done. On to the next one. I have the 5500 on 'mounting feet', instead for the full board I had built originally. So it is off the floor for ventilation. Also saw the UPS man-
March 20, 201510 yr I just got my luxury pro in yesterday. and just ordered murder mat today. you mind if I post the link of this to an avalanche fb page? it's called chevy avalanche style.
March 20, 201510 yr Author I just got my luxury pro in yesterday. and just ordered murder mat today. you mind if I post the link of this to an avalanche fb page? it's called chevy avalanche style. sure man. You can find me on f/b too, I post all my stuff there too. Lee Carter
April 2, 201510 yr Author Sorry guys- been gone for a bit. Went to SBN a couple weekends back, and had a blast. Alot of bad ass builds. But my laptop went on the blink the minute we got there. Finally bought a new one yesterday. Then I've had all my boys last week, while their mom had surgery done, so the truck got pushed to the back burner. Any hows- what happens when you install fuse blocks and don't run wires to them for a while? you lose some set screws. bought enough to just replace them all. Then thought I'd run some wire today...and ended up working on my oldest boys truck. He jack the light bar off the pushbar I had on my Burb...and we put it on his lil Nissan I bought him. BUT- Tomorrow we are working on mine damn it! LOL
April 7, 201510 yr Author Been a few days- been trying to spend a few hrs a day on it. Pics are better than words right? Made a mounting pad for the fuse block- ran the short pieces to the fuse block. Got the buss bars from Ill Customz on F/B. My son took a pic of me putting the cover on the fuseblock before heading out to the family Easter BBQ. Bank all cleaned up to show off at the Family BBQ- Business end hooked up up closed- still have to tidy it up a bit. Speakers hooked up Finally I spent today doing this.... Note the hint of the next step... That wire tho! Nice of GM to put these nice pass thru's- Slow and steady. it is coming together. Ordered the proper fusing from SHCA over the weekend. Hoping to install the Dual alt kit tomorrow.
April 7, 201510 yr Yeah that's nice meep it up...need to order more SHCA wure myself this weekend or next...love the build O ON that daul alt kit if the you have both singer alternators and your battery lights cuts on you have to shorten your belt 1/2" or 1" to get that light off...well thats what I had to do... Edited April 7, 201510 yr by Antoine'stahoe155+
April 7, 201510 yr Author Yeah that's nice meep it up...need to order more SHCA wure myself this weekend or next...love the buildO ON that daul alt kit if the you have both singer alternators and your battery lights cuts on you have to shorten your belt 1/2" or 1" to get that light off...well thats what I had to do... Thanks- running a stock alt for the truck, and a dedicated Singer 350 to the battery bank.
April 7, 201510 yr Author Thanks guys...means alot to me. Haven't fooled with it today- but may go pull the alternator in a bit. It was funny at Easter that my aunts and uncles(in their 50's) were all like- I gotta hear it when you finish it. I knew my lil cousins would love it, but didn't expect them to get into it.
April 7, 201510 yr My dad who is in his 50's now, has helped me on numerous installs.Hell, my last visit out to see my grandfather, who's in his late 70's, he had to show me the new deck, fronts and subwoofer he had just finished installing in his reg cab ford ranger...All types enjoy the stereo's... Papa loves seeing and hearing what I've done in my vehicles when I visit.
April 9, 201510 yr Author After chilling out yesterday- I got some work done on it today. Dual alts are installed! Took the Cande Shoppes 280A out and reintalled my stocker. then installed the Singer 350Amp. Didn't wire the 350 up yet, but being used- I was glad to hear zero bearing noise with the truck running. a few crappy cell pics. Can you spot the Singer??lol Bracket installed, mocking up the alts... belted up! Hoping to get the wiring done tomorrow...
April 10, 201510 yr Author didn't do much today....but reinstalled the fuse block and hooked up the + wires from the Singer. Hope to spend a few hrs at the body shop tomorrow with their lift to run the grounds, and the 2 runs from fuse block to fuse block. Question: I have 3 runs to the frame off the battery bank for ground. And I plan to run 3 runs to the frame off the Singer in the front. Do I need to ground the body? Amp is grounded to battery bank as well. Pics-Looking good! Edited April 10, 201510 yr by Leedogg
April 10, 201510 yr Author Today I got the Alt grounds ran... and Power wire ran from front to back. Marking the spots to drill Holes drilled The ones you love hurt you the most.LOL As the drill popped thru the first hole- I banged my honker into the fender- bled for a few. Still sore. Ran out of black shrink wraps... Cold galvanized and rattle canned black. 2 runs of Positive tucked away- Still have to clean up and tie wrap...everything in except for fusing, and wiring the Singer up. Just enough...
April 12, 201510 yr on the 02-06 avy's they had the stock battery up front driver corner. I have 1 in each corner myself right now. looking good man. did that duel alt bracket come from stinger? how much did that run ya. all of em I've seen are like $290. those "pass thrus" are water drainage for the bed obviously great for running wireing thru too. couldn't find ya on facebook. there must be 100 lee carter names on there
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.