Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Your specs at ssa say 350 @ 4 ohms.

 

The manual says 400 @ 4 ohms.

 

Which is correct? Not that you will hear the difference.

  • Popular Post

Both are correct but this is really a misprint in the manual

We rate the amp at 350 watts continious into 4 ohm using a 1kHz sine wave, but when playing music there is always some headroom as the average current is lower.

So the amp will get close to 400 watts depending on the duty cycle. But as you stated, you would not hear the diference.

 

By the way, I have an small istallation to a 1992 Jeep Wrangler converted to a Jurassic Park Replica using a Barbara Ann tp power 2 MB Quart Tower spakers mounted on the roll bar and a 10" Bass tube. I will post some pictures later

 

 

Nick and Big Ben are comming soon!

We will keep you posted

 

 

 

Michael

US Acoustics

 

Both are correct but this is really a misprint in the manual

We rate the amp at 350 watts continious into 4 ohm using a 1kHz sine wave, but when playing music there is always some headroom as the average current is lower.

So the amp will get close to 400 watts depending on the duty cycle. But as you stated, you would not hear the diference.

By the way, I have an small istallation to a 1992 Jeep Wrangler converted to a Jurassic Park Replica using a Barbara Ann tp power 2 MB Quart Tower spakers mounted on the roll bar and a 10" Bass tube. I will post some pictures later

Nick and Big Ben are comming soon!

We will keep you posted

Michael

US Acoustics

Great to have you here Michael! Hope to see you post!
  • Admin

Both are correct but this is really a misprint in the manual

We rate the amp at 350 watts continious into 4 ohm using a 1kHz sine wave, but when playing music there is always some headroom as the average current is lower.

So the amp will get close to 400 watts depending on the duty cycle. But as you stated, you would not hear the diference.

 

By the way, I have an small istallation to a 1992 Jeep Wrangler converted to a Jurassic Park Replica using a Barbara Ann tp power 2 MB Quart Tower spakers mounted on the roll bar and a 10" Bass tube. I will post some pictures later

 

 

Nick and Big Ben are comming soon!

We will keep you posted

 

 

 

Michael

US Acoustics

 

:WELCOME:

  • 3 weeks later...
  • Author

Fail !

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.