lol... i just got it today, and im going to install it next week when i get the amp and amp kit... i cant wait

BTW i didnt get any stickers with my sub... how can i getr some?

Edited April 13, 200718 yr by why

what amp are you planning on running???

Kicker zx1000.1

i already order it and im just waiting for it

thats awesome i have a 12 Q and I've gotten nothing but great comments on it. I found a video on youtube of a guy with a 12 Q whose running the same amp you're getting.

here:

http://youtube.com/watch?v=30glHtkATHg&amp...ted&search=

^lol that is pretty much why im getting that sub, while i was doing the Fi Q research i found that vid on you tube, BTW does anyone got stickers with their sub? because i didnt...

how can i get some stickers... i mean i have more than the posts needed im just messing the review, but for that i will have to wait 1 more week

^lol that is pretty much why im getting that sub, while i was doing the Fi Q research i found that vid on you tube, BTW does anyone got stickers with their sub? because i didnt...

how can i get some stickers... i mean i have more than the posts needed im just messing the review, but for that i will have to wait 1 more week

http://www.soundsolutionsaudio.com/forum/i...?showtopic=7336

Congrats...I know you'll enjoy it.

any suggestions on the tunnig of the box? im debating if i should tunned to 28hz or 32hz? what would you guys say?

What is your name and Ill send you out some. You should get a sticker with every box. If one of my guys isnt putting them in, Ill have to have a little talk with them.

28 hz really drops low and depending on the overall enclsoure size is a bottom end monster. 32-33 is a good standard all around tuning that gives you a little bump in the 35-55 range and seems to be what many people like. I prefer sealed or lower tuned enclosures

Thanks...

Scott

What is your name and Ill send you out some. You should get a sticker with every box. If one of my guys isnt putting them in, Ill have to have a little talk with them.

28 hz really drops low and depending on the overall enclsoure size is a bottom end monster. 32-33 is a good standard all around tuning that gives you a little bump in the 35-55 range and seems to be what many people like. I prefer sealed or lower tuned enclosures

Thanks...

Scott

sealed enclosures ftw

Indeed

Sub enclosures tuned over 33Hz'ish sounds too rolled-off and artificial to my ears, YMMV.

Ignacio, you know the one that the street name is also in spanish

well is just a mistake so no prob,

well i like low better tan loudness so i may go to 28 or 30 then thanks for the input.

well if i tune it to 28 will i still feal the bass on my body, the box is a 2.32 after dispasment

go with the higher tuning, you'll be happier. Do 33hz and then report back to us and let us know if it isn't accurate enough for you

Sealed enclosure FTW x2

i prefer sealed and will probably never run anything but sealed in the future. But thats what i like,for what he wants, it just doesn't fit the bill IMO

I've got mine tuned to 33 hz and the SQ is really good. It seemed to quicken up a bit in a sealed box. But the tonality in either alignment is great.

Keep in mind that I only had it in a sealed box for 3 hours.

What type of music do you listen to? I'd say tuning around 32 would be good all around. I like it, and yes it should still shake

im doing the finishing touches on the box, and i have a couple of questions, shoul i use 2 sheets of 3/4 MDF? should i use 1 or 2 ports?

Do you mean to double up the enclosure walls? Usually not for a Q12...

As far as ports, I normally do 1 slot port for them, although aeroports a single 4" is pushing things and it might be a tough call to stick a pair of them in the box depending on the dims and space you have.

Thanks,

Scott

mine's doing well with a 6" PVC port

well im going to do 1 4" port 8.8" of lenght, and if i have port noice i would build another box... lol

BTW, i juat got my amp, is a kicker zx1000.1 that is rated at 1105 watts rms

also, scott did you sent the sticker?

Rule of thumb from my past experience is "a single 4" port always = port noise". Might be different for others, but the Q's can move some air, so I predict huffing.

I'm pretty tight on space so I went with a 24 sq in slot port and I have noise. From my experience, I would say that you need to be closer to 32 sq in for a 2.0 cu ft box for a Q12.