when was it coming again?

They are already released:

http://www.soundsolutionsaudio.com/shop/in...at&catId=48

i thought there was some dvc one coming out that could take the power from 4 saz15's or from one saz3k

i thought there was some dvc one coming out that could take the power from 4 saz15's or from one saz3k

You are referring to the nightshade. Jacob, you got a time on it?

i thought there was some dvc one coming out that could take the power from 4 saz15's or from one saz3k

You are referring to the nightshade. Jacob, you got a time on it?

Nightshade is still in development and is scheduled for next year.

so 4 1500s, would it take 2 3ks?

was that for daily or burps?

so 4 1500s, would it take 2 3ks?

was that for daily or burps?

It was 3k RMS Here: http://www.soundsolutionsaudio.com/forum/i...st&p=229432

Edited June 13, 200718 yr by Big E

sexy. just read the whole thread and cant wait for the sub.

so 4 1500s, would it take 2 3ks?

was that for daily or burps?

I want it to be listenable, so making it to handle the full brunt of 4x 1500Ds all day long doesn't make sense. That much power will be reserved for burps -- a single 3000D or pair of 1500Ds for daily is plenty. The prototype took up to 10kw before one of the coils opened up. We determined it was probably due to the fact that the proto had only 6 spiders when it should have had 8 spiders -- this lead to the coil rocking which scraped the gap making a thin spot on the winding, which burnt through due to the high current.

Next proto will have 8 spiders, a longer coil, and a harder cone. I'm not rushing this sub, it'll be out when it's ready

updates?

It has been a week, give it at least a month or 2...

Indeed... I've been waiting on the modified coil for a while. I am also working on arrangements to have the Nightshade assembled in the USA as well... so it'll take some time

what? you cant tell im excited brad... jeez.

and nice. usa made products = less hassel in terms of shipping. nice.

jacob, are we going with a composite cone... and any possibility of doing a competition version (much like the TC 5200 kit?)... I want them in 10"ers... LOL.

jacob, are we going with a composite cone... and any possibility of doing a competition version (much like the TC 5200 kit?)... I want them in 10"ers... LOL.

There won't be any options at first. It's pretty tough to get a quality SPL sub out at all It's going to have a ridiculously hard paper based cone.

anytome jacob uses "ridiculously" it has to be good!

i happen to be a huge fan of paper cones over plastic and metal... lol!