I have a PDX-4.100 amp and I use the front two channels for components. I want to use the back two channels (200rms x2 bridged) for SD-1 subs. What would be the best combination of these subs for me to use to get the best bass? I can spend up to $250.

What box do you want to use?

Ported or Small Sealed, use the 10" model hands down -- two of them for a 4 ohm load.

Larger Sealed or Transmission Line, use the 12" model -- again, two for a 4 ohm load.

Either option will come out under your budget, contact a dealer for pricing (like the SSA store) and you will get a price quote that is less than MSRP.

I have a PDX-4.100 amp and I use the front two channels for components. I want to use the back two channels (200rms x2 bridged) for SD-1 subs. What would be the best combination of these subs for me to use to get the best bass? I can spend up to $250.

I would do two 10" sd-1's ported to 30 hz.

Edited July 11, 200718 yr by audio-neon

I have a PDX-4.100 amp and I use the front two channels for components. I want to use the back two channels (200rms x2 bridged) for SD-1 subs. What would be the best combination of these subs for me to use to get the best bass? I can spend up to $250.

I would do two 10" sd-1's ported to 30 hz.

thanks....it should be able to fit into my Toyota Camry right? (with SOME leftover trunk space?)

Edited July 11, 200718 yr by Invisible23

What box do you want to use?

Ported or Small Sealed, use the 10" model hands down -- two of them for a 4 ohm load.

Larger Sealed or Transmission Line, use the 12" model -- again, two for a 4 ohm load.

Either option will come out under your budget, contact a dealer for pricing (like the SSA store) and you will get a price quote that is less than MSRP.

I'll probably use a ported box so I think i'll go with two 10"'s. Thanks for the help. Can't wait to hear them.

Any recommendations on a good ported box?

Edited July 11, 200718 yr by Invisible23

What box do you want to use?

Ported or Small Sealed, use the 10" model hands down -- two of them for a 4 ohm load.

Larger Sealed or Transmission Line, use the 12" model -- again, two for a 4 ohm load.

Either option will come out under your budget, contact a dealer for pricing (like the SSA store) and you will get a price quote that is less than MSRP.

I'll probably use a ported box so I think i'll go with two 10"'s. Thanks for the help. Can't wait to hear them.

Any recommendations on a good ported box?

Yessir, just like the one Rich (stratusrt01) made for me:

2 ft^3 tuned to 30 - 35 Hz in a 2002 Civic LX trunk.

He can make one just like it for you for around $150 or so I believe.

I would start with the 1.0 @ 30hz (per sub) listed from Sundown and go from there.

What box do you want to use?

Ported or Small Sealed, use the 10" model hands down -- two of them for a 4 ohm load.

Larger Sealed or Transmission Line, use the 12" model -- again, two for a 4 ohm load.

Either option will come out under your budget, contact a dealer for pricing (like the SSA store) and you will get a price quote that is less than MSRP.

I'll probably use a ported box so I think i'll go with two 10"'s. Thanks for the help. Can't wait to hear them.

Any recommendations on a good ported box?

Yessir, just like the one Rich (stratusrt01) made for me:

2 ft^3 tuned to 30 - 35 Hz in a 2002 Civic LX trunk.

He can make one just like it for you for around $150 or so I believe.

That looks pretty sweet. How can I get in contact with Rich to build me one?

You can PM him on this forum at stratusrt01 or on Realm of Excursion.

Where can I get the SD-1 for the cheapest price?

http://www.soundsolutionsaudio.com/shop/in...p;productId=146 If I buy 2 from there plus a $150 enclosure, then it would cost me about $370. It's a bit over my budget and I could probably afford it anyway but I was just wondering if I could buy the SD-1's cheaper?

Edited July 11, 200718 yr by Invisible23

Where can I get the SD-1 for the cheapest price?

http://www.soundsolutionsaudio.com/shop/in...p;productId=146 If I buy 2 from there plus a $150 enclosure, then it would cost me about $370. It's a bit over my budget and I could probably afford it anyway but I was just wondering if I could buy the SD-1's cheaper?

email [email protected] for a quote.