Crescendo Audio

Welcome to the world of SSA, we are glad to have you aboard. Crescendo Audio products will also be up on the store shortly.

.

Hello, I was just wondering if there have been any posting of any of the amplifiers tested on a 16v setup. Clamped or not. Just interested what these would do, also, at what voltage will they go into protect. Really interested in the information abover for the 5500 series. Thanks

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

G'day Need help with my crescendo Bc5500 amplifier. Lately i installed two 12" rockford fosgate T2D2 1200 RMS each. So a total of 2400Rms. So today while a songs was playing, the subs stopped working and on restarting the car, i saw kind of flame coming from inside the amplifier but no smoke. On restarting again, the amplifier showed blue light which means it's working but it wasn't. On measuring power output and ohm and everything, it gave normal readings. On opening the amplifier couldn't find anything burntor burnt smell. But when attached with a different amplifier, subs work just fine. Checked every fuse and wires and subs and amp and everything and every out…

When are your amps going to be back in stock?

I sent my C1100.4 in on April 19th, RMA #JKC11041513. I called on May 1st, and was told that you guys had received it and that it was waiting to be benched. I called on May 8th, was told that they had benched it, and were having issues resolving the problem. I was also told that if they could not resolve the issue (channel separation) by the end of the week (I'm assuming that's Friday) that I would be sent a replacement. I called on May 14th, no answer, so I left a message. I called on May 21st, no answer, but I did not leave a message. I called on May 22nd, no answer, so I left another message. I also filled out a support ticket on May 22nd. I have not yet r…

I ordered some 6.5" PWX while back and was wondering if anyone else did & have received their order yet..?

Hi there, my name is Jim, and I'm new here. I can install but conceed I know very little about the science of what I'm doing, therefore I'm looking for a little help in optimizing my current project as it is different, and of course budget restricted. The project; I am currently refurbishing a boat, it's a '93, 21' Reinell Sunliner bowrider with Chev.305/Mercruiser I/o. I have a Rockford 15, and a sony xm-405eqx, a Alpine 9886 head unit I would like to use, also a pair of energy 4" coaxials. I am wondering about the Crescendo Super tweeter and 6.5's. Knowing I need more amp as well, at least another two channel. My goal is to fill this boat area with as full spectrum as p…

heres an awesome Vid Bryan over @ mosified shot @ SBN .....little harlem shake fun with the Crescendo Audio Expo

I bought a bc2k about 6 months ago and about 1 month ago my bass knob clipping light would work but the stop working till I tapped on it. Well a few days ago it finally stopped working all together. Is that part of the warranty? If not how much would it cost to buy a new one?

Will the bass knob from an american bass ab150 work with my 1000c4?

Ok I would like a new amp or a refund for my c1100.4 The day i received it all it did was protect..even with JUST rca's in. I changed rca's and everything checked all speakers (4 crescendo 8's and 2 cendo super tweets). It plays for a little and randomly protects. I call you guys and you tell me I need another battery JUST to run this SINGLE amp. So i got the battery STILL protect. I switch from high pass to low pass...guess what? Protect. I send the amp to you guys and you say it's fine and send it back to me , but I had the same problems when I received it again. I SEND THE AMP AGAIN. you guys say the 3rd channel went out due to low power and tell me i MUST have a secon…

I am/ was gonna buy one of these amps till I read on another forum that they us the same board as the hifonics bxi 2600 I don't see how this is true being that they were made in different countries. but is this true? I can post a link to this forum if needed

Ok I'm getting 2 12ssa zcons dual 1ohm. I got a BC3500 what would be the best way to wire the subs to it and the best wire to use. I think I'll have planty of power i got one xs power 5100R and going to put a second battery xs power 3100 with a mechman alt. all in a 1998 honda civic.

I finally got my bc2000d in and was so excited. I replaced my Rockford Fosgate T1500-1bdcp using all 0 guage wiring new XS Power in the back, stock alternator. Everything was gravy with the Fosgate. The new Crscendo diD NOT impress me at all.... Actually it was VERY lackluster, sounded like crap.... No bass , no power at all.... Sounded like a 300 watt amp compared to the Fosgate. First thing i noticed was the bass knob wasnt working. And the amp clipped every so often. The gain is barely at 1/4 and the bass boost, subsonic were off or at the lowest setting. Lpf set at around 80hz. Still sounded like garbage even without the remote knob Called crescendo and they shipped…

Hows it going. I'm looking to purchase the BC2000D to power my 2 12" GCONS @ 2 Ohms. What is the lead-time on this product? Thanks, SnapperKing

has anyone bench all or any of the amps i have a bc200d and wanted to upgrade to a bc3500 which will help push 2 PA mofo's 124x wired to 1 ohm unknown after box rise. If the 2000d can or will be enough to push the subs then i will stay were i am at and just work on my voltage or go with the bc3500 and have it sit around for a bit until the voltage is fixed and battery and all that other good stuff. I am hearing that crescendo amps are under rated.

Ok, I bought a 2k last June-July and started buying the other stuff for my install. So long story short I got everything installed Monday. At first my amp was fine it protected one time the first day I had it, but I thought that was because I hit a big bump on the freeway. Tuesday I was heading back to the shop that did my install for them to finish my big 3 or 5 actually. So as I went to leave my amp protects. I restart the truck and start beating on it again and 30-40 sec later it protects. I call Navid and he says it might be my Bass Knob so I unplug it and beat on it with the car off and it plays fine. I played it for a min or two fine. Then I go for a drive with the …

Does anyone know how much power the bc2k amp puts out at .5 ohm?

ok so im looking to get one of these but im really confused about them. it says they are a mono block amp but yet they have ++ and -- speaker outputs? i want to run two dual 2ohm fi bl 15s off of it and im wondering how to get a two ohm load. wiring them in paralell is a 2 ohm load but some people are saying that its a mono block and it doesnt have ++ and -- speaker outputs and that the picture on the site is just a different one but i didnt think so and i understand how to wire them if it only has single + and - outputs. just very confused on how an amp can be a mono block but have dual outputs? im no wiring wizard..