General Audio

Recently purchased an SSA Evil 15 and was gonna throw it on a cab-45, will the evil take that much power daily? And what kind of electrical upgrades would I need to meet the system requirements, will be going in a 2005 Tahoe. Not new to car audio but never had to go past an AGM battery in the back.

Hey y'all it's been a minute. I recently purchased a 2013 Cadillac srx. Totally in love with the new ride. No more huge audio builds. It has the factory 10 speaker Bose system, but sounds like total garbage. I'm planning on upgrading, but keeping it very clean. I'm going for clarity, not necessarily an sq build but more in that direction. Not sure where to start. Any suggestions? The sub will be replaced eventually. But in the mean time I guess front doors are priority . Factory tweeters are in the pillars. I want it to look completely stock or as close as I can.

Looking for more ideas for an enclosure that will work with an FI Q 12 I’m the rear cargo area. I am being told to go 1.75 to 2.25 cubic feet since I want it ported. The current enclosure is too tall and i would like a little more room back there. Pretty sure it’s close to 2.5.

I am about as new as a newbie can get to car audio and the use of forums so if I am annoying anyone I apologize in advance. I am pretty frustrated at this point cuz i cannot find an answer anywhere so here I am. I bought a 15" xcon from a guy who was going to help me set up my system but he literally went mad and is currently in the state hospital. he told me to get a Hifonics Brutus brx2416.1d super d class mono amp which i did. He also told me that this sub is half ohm and thats about as far as we got before crazy happened. So now due to his mind frame I question if I got the correct amp and if so how do I wire a half ohm sub to a 1 ohm stable amp without damaging amp. …

Hi All, After a year of bassless sadness, I am getting to a place to be able to set up another system. Right now, my current research leads me to an SSA ICON (12" or 15" though leaning towards a 12"), FI Q Series, or Sound Qubed. I am also open to other brands or recommendations. My last system was two Sound Qubed HDS 3 10's and a Skar Monoblock 2200w Amplifier. I sold this system but still have the external audio battery to use. I have also had SSA DCON's in the past which I loved. I was reading online that SQ's products don't compare to SSA or FI. What would be the best subwoofer to go with for a single sub setup? Ideally, I am looking for sound quality more t…

Hello guys, i still have my Mazda CX-5 with everything still in, and working ! I am looking for my next car, thinking about an hybrid one, like a Lexus HYBRID suv. Who has ever installed a system in one ? I don't know what those car can handle. I'm sure I must keep the hu, but can I run 2 amplifiers ? I want to keep the same kind of power I have now : one 2000 w bass amp, and 1 or 2 amp(s) for 4 active channels (mids and highs). I'd love some examples. Thanks in advance. Alain

no

Hi Everyone. Newbie here with insufficient knowledge to make informed decisions. I have a 2019 Volkswagen Caddy SWB van. Plenty of sound deadening and carpet to go in along with many mechanical and cosmetic modifications. Daily driver, sound quality bias, wide variety of music. I’d like to keep the factory RCD330 head unit, put Evil 6.5”s and Evil tweeters in the factory locations, and have one or two 12” subs directly behind the front seats in what would be the rear passenger footwells. No plans for rear fill. The Evils will fit – tweeters out front on top of the dash, 6.5s in the front lower corner of the doors. Might be able to position the twe…

I have an iPhone 11 and using Apple Music and Spotify free Trial and in streaming over Bluetooth HU is an older pioneer probably 4 years old . Non CarPlay . The music doesn’t sound as full to me , am I crazy or is there an actual difference? I hate the thought of having to plug my phone in every time so I haven’t even tried the phone wired.. but when I swap back to music on my usb stick omg sounds so much cleaner.

I own a Jeep and have a factory speaker: https://www.jeepsareus.com/sku/77kick06.html and I would like to upgrade the bass to it and would love to have a more full sound. Is there any way I can DIY it without me buying a new speaker?

Hey everyone, I'm searching for the old school MTX 9515-44 Subs. If you have any and are wanting to sell them let me know please. Motor and basket only even. Thanks in advance!

So I will be pairing the 4 ohm Crescendo STS-1 Silk dome tweeters with 4ohm Crescendo PWX 6.5's . The tweeters came with crossovers just for the tweeters. Amp is a nvx jad800.4 which does 125 x 4 @ 4 ohms. if I have the pwx's hooked up to channels 1 & 2, can I connect the tweeters on channel 3 & 4 and essentially barely increase the input sensitivity on those channels? Doesn't seem accurate whatsoever to me and I am thinking I could seriously fry my tweeters from the get go. Would that still be considered going passive with tweeter crossovers or am I diving into active territory? Am I better off getting a different passive crossover that I can connect both pwx &a…

I’m probably going to be flamed for this but where would I learn how to build my own drivers like SSA and Sundown do? Do they manufacture the surrounds, cone etc themselves or do they outsource most of the parts and assemble them before selling them? I really want to start my own business someday and car audio is my passion and I would LOVE to learn all I can.

We have a Skar Audio RP-1200.1D and we have it hooked up to a 18 Skar Audio 600 wattt 1 ohm sub woofer . If we hook 1 subwoofer will it be receiving 1200 RMS ?

Hello. New member, my first post. Looking to replace my current system with something better. I currently have 2 x 12 L7s, 1 x kx1600.1 and l2ci. The car is bmw m4, 2018. I've been looking at getting 2 x 12" icons. Need suggestions on the type of box and amp that would work best. I'm looking for sound quality but also loudness. I don't have much trunk space. Right now, i'm using a sealed box up to kicker specifications with polyfill. Current system is loud and works well but lacks quality. I would prefer a sealed box. Kicker subs only play low tones and need something that plays slightly higher (100hz-250hz or so). The stock system sounds really …

I have researched and researched but I cant seem to figure it out Cadillac CTS, stock Bose system, stock amp/10 inch subwoofer that has a bump that's not bad However I would like a tiny bit more bump I'm wondering if I can just replace the stock sub with an aftermarket one Any help will be appreciated Thanks

I have recently upgraded my sound system to a Sundown u15 D4 1500w rms, and a GK audio 3500.1D1 (3000w rms). No component speaker upgrades...YET. My stock 132 amp alternator is well on its way to being smoked. So, I am ordering a Mechman 320 amp alternator, and would like to know what size battery (that will fit in the stock position) I will need. I don't care so much about amp hours, because bumping the system isn't really a common thing without the engine running. My goal is to NOT run any type of capacitor, and I really don't want to have to add a battery in the back. I am now running an OEM duralast battery (not sure of specs) and with my weak stock altern…

I would like to run an IB sub (ski pass) setup in my new vehicle (2015 honda accord coupe) but I'm unsure if its a smart idea to cut the rear seat back. In previous vehicles w/ a 60/40 split rear seat I would lay down one of the rear seat sections. However, this vehicle the entire rear seat back is steel and does not have a split section that I can lower. Also, there is no pocket arm rest in the center like most sedans which people commonly vent through. Can I remove a section of metal and vent through the foam/leather seat? For low frequencies I think I would be fine... How much metal should I remove? Some percentage of SD? …

Why does enclosure plans use dimensions for builds over ft. Measurements ? ie. displacement vs. total internal area ?

I just bought a zv5 15 thinking it was dual 2 ohm and it’s dual 1 ohm. I have a few questions. First, can it be recone to dual 2? Because I read some motors are only configured to function on the original impedance. Idk. And if I can’t get it recone, can I run that amp at .5 ohm unclipped on that zv5 and not overpower it? Should I run it at 2 ohms? I hope it can be reconed to dual 2. In need of help. Thank u.

Hey! I just saw this video about Big Ear custom earphones and I want to know if any of you here tried their products. I'd love to get myself a pair but I want to know if their great first. Just wanna avoid getting pulled up. LOL! Any other recommendation? Thanks!

Can this be done without welding i want to put 6 18s in a 6th order inside a escalade esv but im worried about the sunroof

I'll use REW on my laptop. My question is can I use the omni directional microphone that came with my Kicker keysmart amp that is used to auto tweak it's built in DSP? My second question. I've never used REW before. Any tips/suggestions for the best settings/methods to measure my car's accoustics? Also should I turn off my Keysmart amp's DSP features first or will it matter? I just want a graph to see where the peaks and dips are in my frequency response. Final question. Can I measure for cancellation issues using REW?

Hello, I have a 2019 Nissan Frontier with a stock radio / screen minus satellite radio. I want to upgrade to a screen that has satellite radio and Car Play, (stock I can not upgrade). At the local dealer, they have Alpine, Kenwood etc, but can not seem to find a way to use the radio system (Car Play) wireless, meaning the only way is to have the iPhone plugged into the radio. I would prefer not to have the phone plugged in, but rather connected wireless and get Car play. Thank you