General Audio

I am tryin to build a blow through for my truck. I was wondering that if i build a simple ported box and then cut the hole for the subs and port to come through do i add that in to port calculator ? I thiking seriously about nightshade 18s I was thinking 5 cubes per sub tuned to 35 htz.. Any advice on the best way to go about the blow through

hey guys a friend of mine just bought a 2008 silverado flatbed and he want to put three or four 15's in there...he wanted to know will he have to do a blow through or not

so in two years, i am getting a car. it will be my 16th birth day present. now my plan is: (4) MJ-18's in a clamshell (4) 6.5" tang bands in the doors (1) U.S. Amps XT-2000d @ 1ohm (subs) (2) Legacy LA160's (mids and highs) and 6 pioneer tweeters. all this crap is going in the back of a 99' beetle. ported and tuned to 30Hz, will this monster blow my car up? i mean it would be fun, but i would have no mode of transportation. so please, tell me now if doing this will be a waste of money and/or put me out of a car. i mean, how bad could it be? i just like my music loud!

Hey Guys, I'm In Sort Of A Dilemma.. I Just Don't Know If My Sub is blown or if my Enclosure has an air leak or something.. I made a Long TEMPORARY Enclosure for my 2 15' Orion HCCA .. no bracing no fiberglass on the inside and on certain songs it sounds like AIR is leaking or something it just sounds bad....but only on certain songs.. now my concern is are my subs blown or is it the shabby job of an enclosure that i threw together...(and when i say shabby i mean i didnt take the time to seal the inside with fiberglass or etc etc etc)

I was thinkin, would i need to build something like a funnel around the box of my subs leading up to the cuthrough in my truck to make optimal use of output from my subs......or would it be okay to just put the box few inches back from the wall of the truck?

Hey! I just saw this video about Big Ear custom earphones and I want to know if any of you here tried their products. I'd love to get myself a pair but I want to know if their great first. Just wanna avoid getting pulled up. LOL! Any other recommendation? Thanks!

Just saw this, worth a look:

Okay, my buddy wants to put some stuff in his boat and I really have no idea here. I'm looking for some help. MY best guess would be to treat it like a convertible automobile which means high efficiency and loads of power. Now, this has to be rather budget friendly. He has a Sony HU, all I need is some subbass and some CHEAP drivers to handle the rest of it. I will probably go with a line array of some sort running horizontally throughout the boat. Now, amplifiers is my biggest concern. Being a wet environment, I am wary about this. I know there are marine specific components, but browsing through some, they appear to be nothing more than a traditional component pa…

I don't think I've seen any boats on here yet, so I decided to take a few pictures of a customer boat I did at work today. It's still in progress. He have 2 10" Kenwood Sub, one in each compartment in fron and 2 Kenwood Coax speakers in the back. There are 2 more sets going in the front in the walk through or under the benches. All powered by the New Kenwood XR5s 5 channel amp and an Excelon Deck. This thing ROCKS! it's loud and definitely a beach party boat. It has been party proofed so no drunk people fry everything! Heres some Pictures. Even with a Set of 6.5 Coax speakers, this thing gets loud! The customer remove all the carpet and the seats for our con…

a buddy wanted some help with his 30' boat stereo... says he wants more. what should i avoid? he claims too much vibration from the fiberglass hull. sound dead, the whole thing? ideas...

So I want to get started on the wall for the dcons, but I realized I probably won't be able to replace panels in the rear with the wall in. So there is my quandary. My right rear quarter panel is rusted all the way through, it's painted over as a temporary cover up but it's still obvious. Should I postpone the wall for months and months for me to replace all the panels that need to be replaced? Or any other ideas? I've also thought about finding another bronco with a good body and doing the modifications I want to make it my style, but this truck as a lot of sentimental value so that would be hard for me.

i know there are those terminals you can buy from parts express that are pretty nice, but after shipping its like 20 bucks to my area. couldn't i just get some bolts at a general hardware store? i know this question has been asked, but every post i see there is not much about if its ok to do and what material bolts should i look into. all i need are bolts for my wiring and my box should be done!! lemme know what you guys think! thanks!

So i have tried searching and couldn't find anything specific about what kind of bolts to use for bolt terminals and how to install them. I usually run the wire right threw my box but i want to try some terminals this time. I tried looking for copper because copper is a good conductor but i could not find any. So what is the next best kind of bolts to use? How do you screw them on? I was thinking about putting some t nuts in the box on the inside and screwing my ring terminals into those then attaching the wire on the outside with bolts. any input would be greatful.

The first verse will make any SQ junkie cringe. I just think it's hilarious!

What about this one??? http://www.extech.com/instrument/products/...450/407732.html

$24.44 @ Walmart Cheap; but, functional.

I have a stock alt and 2 dura last golds up front and no battery in the rear yet. So I just ordered a dc power dual alt bracket and will order either a mechman 260 amp alt or a dc power 250sp to run along side my stock alt!!!!!!!!!! I'm so pumped!!!! If my calculations are correct, I should see about 260 at idle and 365 at full output with the mechman alt or 240 at idle and 355 at full tilt with the dc power setup!! I'm bout damn ready to see steady voltage!!!!!!!!! Hopefully high 14's too

HI fellas, I recently bought a 1999 Buick Park Avenue and am in need of your expertise. So far I have a Kenwood KVT-911 DVD, 2 12" JLW7's, Audiobahn 2300HCT { I know you guys hate Audiobahn, but I got it the year it came out brand new in box for $100 and 2 very old pioneer IMPP's} that has never even been used, I plan to run it at 1ohm. I am now looking for a nice used 4 channel amp for around $100 on craigslist, I want 65-75rms per channel. I need suggestions on a good pair of 6x9 and 4x6 to run off the 4 channel, I would not like to spend more than $125-150 for both sets. 2nd question is the car has another set of 4x6's upfront also, could I run an identical set of 4x6 …

Just wondering, lookin at it for a cheap source of power for a friend. He wants "LOUD CHEAP and GOOD" Which is obviously next to impossible. But if his standards are that low, maybe Boss is for him! http://www.millionbuy.com/bosol5kd.html

Don't know if it's the correction to post this, mods please move it if it's in the wrong section. Boston Acoustics Exits Car Audio February 23, 2012 by Amy Gilroy Filed under Car News, Home Page Featured, Industry news 5 Comments Boston Acoustics, a 23-year fixture in the car audiophile market is exiting the 12 volt aftermarket as of April. The company will instead focus on its home audio products including speakers, soundbars and radios, and will also enter new home audio categories, said Sanjay Sharma, national sales manager of Boston Mobile Audio. The maker of GT amps and PRO speakers informed reps and key accounts this week, that it will exit the market by the end of…

pro60 crossover, the bass from the 15" treo ssx did this...i just soldered it back on, tested it, it worked, put my door panel back on, and it broke again. only the tweet plays. i think it came loose when i shut my door. i guess im gonna have to relocate the crossovers......which means running more wire....

I got these a few days ago to replace a set of Infinity Reference components and they sound pretty dang good. Big Big Big improvement. The only problem I have is the output is way down compared to the 2 ohm rated Infinity, which ain't a bad thing because they were very harsh to my ears, but the Bostons are having a hard time keeping up with my sub bass with only 60 watts on them. I am sure they would love some more power and probably wake up and really shine. Details........ The Bostons are rated @ 3ohm and 125w rms and I have a Rockford Forgate 450.4 amp that puts out 60w RMS x 4 @ 2 ohm, 100w x 4 @ 2ohm, and 225w x 2 bridged @ 4ohm. I had thought about just bridging the…

so i have been searching around for a solid definition and i cant find any so any help would be greatly appreciated

So, today i biught a 1994 Camry coupe. Red. V6. I will no longer be walling the wagon... i will be walling the coupe. So here the deal... I bought the car for $480. It needs a motor, winshiled, and a new hood(which i already have a spare.) Plan: 1. Put a motor in. 2. Swap the hoods. 3. Tint 4. System. System will consist of : (4) saz-3ks (4) SSA ZCONs 15" or 18" depending on space. Batts... DC Power 390xp Sundown or hertz comps. Sax100.4 Etc etc... pics soon.

Well, after having way to many options to choose from I finally just went out and bought a receiver for my home audio setup. Pics here! I like it so far, spent about 30 minutes with it so I haven't done to much. Did the auto EQ (cause it comes with a mic) and it sounds pretty good. It's got T/A, and abunch of stuff that I don't think I"ll use but it's nice to have. BTW those are klipsch hersey's if you are wondering . Enjoy. -chev