SPL & SQ / Fabrication

Hi my name is Bosco Ruiz....and i bought 2 TEAM RF 12"...nowadays i dont have a box for those subs.....i need ur help I have a RAV4 2006 and the dimensions inside are. High 38" depth 32" width 34" do u have a picture of box for those subs?? what dimensions would be for my subs??

I will not be competing in SPL contests, i just want LOUD bass (doesnt every basshead). The sub i will be getting is a Fi BTL either a 12 or 15, unknown due to money, I think a ported box would be the best, but my buddy told me that bandpass boxes are better. He said a 6th order box would be good, i have no idea what a bandpass or 6th order box is. Are they louder for the daily user? As stated in title, the car i currnetly have is a 2006 Toyota 4Runner, in it, i have mids and highs by pioneer, and they sound good.

Hi I need help making a spl/daily box for 4 15s, I'm going with subs ip port back and want it to be crazy loud, I have 3500 rms going to all of them how should I make the port and what to tune it to?

ok i have a 2002 dodge dakota extended cab, and i was thinking of putting 4 SA-8's in the back area after taking out the back seat. i will get the D4 coil configuration and run 2 off a dsc1000.1 and the other 2 off another dsc1000.1 (each sub will get 500watts) now i have no clue how to design a box, the only other ported box i made someone else designed for me and i built it. i dunno max dimensions of the box but if you tell me how many cubes it has to be i can figure out how to make that size box fit where it needs to, also for the "easy" factor id like to use aero ports instead of a slot port design, so what size and lengh aeros would i need? and where can i buy thos…

2012 focus sedan. currently running a prefab decent but cheap box ..in its current position metered 138 @ 37hz sealed on the windshield. fired the box forward today and noticed it wasn't half as loud this tells me my positioning is right for this car. So my question is do you think this box is working well or should i build a new box different specs i don't compete but i like loud and low this setup is pretty good for a single 10 but i think there is room for improvement would like some opinions/box ideas my max dimensions are going to be around W x H x D 30x14x27 to easily be able to fit through trunk opening which is a must as it needs to be removable when i DJ A…

so ive built a few boxes before an they were simple an nothing special so i use a box calculater that i no longer have( computer crashed)! so im trying to build a box for this 15 btl fl to go in the hatch back of my 1982 mustang! i found a new box tuning calculater (torres) from smd site it has the height 1 an 2 an depth 1 an 2 so i figured hey it will work but it doesnt for me..it messes up an doesnt add height 2 in so i makes it just a square box i wana do 21" tall front 13.50" tall in back 17" deep an 35" wide.. with them specs i want sub up flush mounted an the port would have to go forward towards the top of the box! if that makes since.so THE would make the inside …

Hey! I´m new here Just ordered a Warden 18 2x2 ohms thats going to sit in my SAAB 9000 coupé in the trunk. It will get about 4500 rms from a Soundstream Goliath Tarantula XXX 6500D. How big box do I need? I want to play loud (ofc) but loud to music, not to pure sinewaves. The music I´m playing is Lil Jon, Ludacris, Young Jeezy... that kind so tuned to 30 hz would be really nice Depending on what the FS is. Cant find it *If I´m spelling something wrong its because I´m Swedish *

Current setup for my 15" Xcon: Sealed enclosure with dimensions - H: 17" W: 32" D: 15" Total space I have is: So I want to do sub up, port side firing w/ aero ... Does this looks good in Torres' calculator???:

I am pretty serious about doing a blowthrough to my F-150 in the next few months. I am pretty settled on 2 18"s on 4000 watts (will be more with upgrades in the future.) I was thinking of a 4th order bandpass box for them but I want to be loud on low hertz (like around 30-35). How can I accomplish this? Also, what would be better: 2 18" or 4 15" all on 4000 watts? Like I said, I want to be loud but hit low.

Just got my new BTL 18 with all the goodies i wanted. now for the box. I plan on building it, but it will be the first one i build. Naturally i have a few questions that i would appreciate anyone taking the time to answer. I got alot of box building info from http://spkrbox1.spaces.live.com/ it seems to be legitimate information, i'm pretty sure i got the link from this site. but should the height of a box really be 1.4X the weight??? with my calculations, to get a box of 8.6 cubes BEFORE port and sub displacement, my box has the be 34 inches tall!!! (25X34X17.5) Ports brings me to my next question... are there are any performance differences in the type of port yo…

Need help with box demensions for a custom built subwoofer The RE has tc aluminum basket 4" 8 layer flatwound aluminum voice coil 3 10" tc spider pack with 1" spacer 8 gauge ofc direct leads dual 2 ohms voice coils everything is brand new just the moter is used also has a two tone carbon fiber dust cap can take 4000 watts rms Thanks going in a astro van

i have been working on not using the stupid ass re calc and doing everything on my own. how does this look. height 16 width 30 depth 20 with a 4 inch wide port 33.80839511415706 inches long tuned to 32 hz.

hi all i recently purchased a fi q 18 to go in my 95 4 door explorer and now i need to come up with the plans for the box so i can start building. my maximum dimensions for the box are 40 wide by 40 deep by 22 high. i am a some what skill full carpenter but i need help in the tunning area. also if anyone has a similar setup to what i will have and still has the plans lying around i would greatly appreciate it or if someone could use or tell me where i can find a box calculator to spec out this box that would also be greatly appreciated. oh and lastly i am open to using a t line but would need the plans to build one. …

18in Sx btw . Ok, I got 17.31cuft to mess wt here 43.5x27.5x25. The box is gonna be ported to idk 32 sounds like a good number. Suggestions? It will probably be dual chambered, wt the port on the end. Is that to big or not big enough is my question. It says it only needs 6cuft for sql, so i guess 8cuft for one sub isn't that bad.

so me and my buddy decided to make the box for my 15 thats on the way and here are some pics gonna carpet it soon! tell me what you think, and be honest!

Hey everyone. I purchased an SA-8 after reading a ton of reviews and now i am ready to start building a box. Since i've never built a box before i downloaded a couple of programs which apparently i have no concept on how to use :/ I listen to a variety of music from metal to dubsteb so i'm looking for a a box that can do both SQ and SPL. From what i've seen online it looks like .6^3 box tuned to 35hz is the way to go. Sub is going to have 500rms at 2ohm feeding it. I was thinking of having the sub point towards the roof and the port firing to the back. The narrowest point in the vehicle is 38". I emailed ram design to see if they could design me something but i haven't…

I'm trying to build a box for a single FI BL 15, fully loaded. I want it tuned around 32-33 hz. Also my trunk in my car is kinda small height wise, so I was wondering if it was possible to put the sub on the top of the box and lower the height a little bit so the sub doesnt get close to the top of the trunk. The port I want on the front. Is that possible? The dimensions I have so far are: Width - 32 Height - 14 Depth - 25 Port Height - 12.5 Port Width - 5 Port Length 1 - 19.25 Port Length 2 - 8 62.5 inches Total Port Area, 3.8 ft^3 for box. Tuned at ~32. Would it be possible to put the sub on top of the box with this design, and still have the port on the front?

Well im swapping out my 2 SA10s each on an audiopipe APSM1300 for 1 SSA 10" XCON and i will be strapping both amps together to get ~2000w @ 2 ohms. It seems like I might get away with being able to use the same box and port length. The current box is 1.39ft^3 before displacement, making it 1.24ft^3 ... using the aero port calculator My exisiting 3" x 15" port will give me a tuning of ~30.8hz. Am i lucky and wont have to build a new box?

hey guys i have a box in my 2000 grand cherokee in which i had a single sa15 but now the sa15 is sold and i just bought a Zv2 15.. my box is 36.5w 14.5h 11.5d and the slot port is 3x12x19 so i know i need to make the port bigger im just not sure how big it has to be.. trying to tune it to 32 htz... any input would be wonderful thanks

Can anyone design me a box for two 15 inch subwoofers? Two 15 inch SHOK minis. I can go 16 inches tall, 36 inches wide and 18 inches deep. These right here. Thanks in advanced.

I need help mainly with the port calculations for a 10 cubic ft box and a 20cubic ft box This will not be a chambered Box I'm "not sure what size cubic ft box I'm gona build yet" So if you have a formula that can figure port sizes that will help allot this is for two BL 18'' subs. I can build a box just need some help with this. Thanks

I built this for a friend of mine. Its about 2.52 cuft per sub with 40 square inches of port per sub tuned to 36 Hz. The objective was to build a box that filled up the back of his truck. But that was too much air space overall, so we pretty much built a box inside of a box.. The pic of the inside looks pretty sick.

So i was trying to look for some pictures of a box terminal made out of ring terminals, nuts , and bolts. So i can have a idea on how to do it. Thanks.

i made a box using RE box builder and this is what i cam up with i am putting a 18" night shade in it how much air space do i have and whats it tuned at i think iKnow but wanna double check with you guys first W=36 H= 22 TD= 24 Bd= 24 1"MDF port 1= 6" port 2= 4"

I want to design a ported enclosure with one DD9512g to put in my single cab chevy 1500. I want it to be loud, but also as musical as possible. I have about 3.3 cuft to work with. The enclosure is going to be a center console enclosure. If I find the frequency which my vehicle peaks at, will this help me choose my tuning frequency of my enclosure?