SPL & SQ / Fabrication

I need help with a box spec for my 2 Sundown Audio SA-15s. Its going into a Izusu Rodeo. The box can be up to 41 inches wide. I looking for a box that i can use as a daily driver and for competitions. I would appreciate the help.

I have a gmc Sierra ext cab and I have a half wall box. How could I secure it so if I crash it doesn't kill me?!

Wassup guys, I just got in my possession 2 18 inch Aq hdc3's bnib. I will be walling my truck and my deminsions I came up with are 51'' width 38'' height 24'' deep. With 1.5in thick walls, I get 20.4 cubes. I gave my self alittle wiggle room for the height and width. I will be tuning to 36 hz with a 9x38 port that is 20.5 in long. It will be braced and before bracing will come out to about 8.2-8.4 per sub, that is after port displacement. If anyone could run those specs I would greatly appreciate it. This will be going into a 2000 gmc Sierra ext cab. They will be powered by 2 crescendo bc2000ds at 4ohm strapped daily then 1 ohm strapped for comps I'm looking fo…

and lower tuning.. plus the subs heat up the enclosure, bad for the amps too, so better cooling! Port is 24" long now for a 22Hz tuning, I get bad cancellation I think, so I will do a 30" port which will reult in 20Hz

hey guys should i build this or should i just keep it simple i have no experience designing an 4th order and would hate to waist 2 sheets of mdf if some one has input for a better enclosure lol its going to be a 1:2 chamber ratio rear is going to be 1.28 after displacements front is going to be 2.76 cf tuned to 36.09 box peaks at 33.79 at 6.69 db and here are pics of what i imagined

Hi guys, I'm in the process of thinking out my rebuild in my car. Here's the origiinal build thread: So I will be using the same subs, 2 18" Mayhems, I will be adding 2 210 amp alts, and Amp upgrade to give me 6Kw+ I want it to be loud and low, play the 25-40hz bracket sweetly, I dont really care outside that cos I dont ever play up above the 40hz range. all help appreciated guys Joe

I'm helping a friend build a box. I've done a few boxes in the past, but this one is different. This one isn't a rectangular box. He wants to, or needs to, use all of his trunk space to squeeze in 2 15" Kicker L7s. The box I designed is 6.11 cubic feet after displacement tuned to 33 hz with ~78 square inches of port. It will be braced and double baffled with 3/4" MDF. My only worry is the port being cut off by the roof of the trunk, but it's got a couple inches to breathe, so it should be fine, right? Criticism is welcome! Thanks!

hi every have another question my step dad bought me another sa-12 as a late xmas gift and he gonna help me build a new box for my 2nd 12 gets here but the space i have is 39x16x22 1/2 which is w x d x h. now my question is is it possible to build a box for these two subs with this much space ? and how high do you think i could tune the sub's at as well if it's not i can add more height to the box.

I had so e spare time on my hands so I figured I would relocate my switches and bass knob. Let me know what you guys think!!!! I'll get some pics of it installed tommorow!!!

Whats the best way to cut a 14in diameter hole in plexiglass? Also, cut a 5in diameter hole in fiberglass? Thanks.

hello all! i just ordered my 18" FI BL driver and am working on designing a box for this beast. i figured id go big as i am leaving for basic training(US Army) in about 6 months. Im looking to take the backseat out of my jeep wrangler and replace it with a fairly large box for this woofer. iv built some smaller sealed boxes and they have all come out fine but this will be my first time building a vented box any advice that you can share would be amazing and i thank you in advance. As far as the sub goes these are the specs that FI gives for it, i measured out my jeep and got some measurements that would work, i came up with a width of 32" a height of 16"(was planning on h…

I was installing a simple Hu in a 2006 Sonata and the four screws that hold the oem radio in WILL NOT turn. I can usually do it with my trusty screwdriver but no luck. So I got out our 14.4v Black & Decker with a mostly charged battery and it couldn't turn them either. My dad says I need to drill them out but I'm not sure how to to that. They're semi-stripped now too so yeah. Any help would be appreciated.

Building a new box for 1 15". Was gunna make it an abnormal shape as opposed to the everyday cube. I've heard that less parallel sides results in less standing waves, but I don't think it would be too noticeable in car audio. Anyway my point is wanting opinion on the ideal shape of a box. Also plan to port it. Thanks.

Will be built in car in this area. Slot port on drivers side, sub and port firing into cab, sealed off from trunk. This is what I've come up with, but how do I figure the 90 for the length of L port? Thanks in advance.

hey guys, im going to attempt to build the box for this zcon but i cant draw if my life depended on it. so if i get the max dimensions up on here, can someone sketch me one up right quick? 4.5cubes tuned@ 34 would be nice. let me know if anyone can help me out! Thanks

I have seen a few posts on here recently about trunk cars and the difficulties that some have experienced with their sub bass system. I think this may help. There are a few primary problems that are encountered when we install subwoofer enclosures into a sedan type vehicle with a trunk. The most obvious problem is the reduced amount of bass in the main listening cabin. The next possible problem is that there is more bass with the trunk open than when closed. A third problem is the excessive rattling of the trunk body panels. Proper damping will greatly reduce the vibrating body panels and yield slightly higher SPL in the vehicle, but will not resolve the other issues inh…

I tried to search for this, but couldn't find what I'm looking for.. I drive an '06 KIA Spectra. I'm having good luck with a Rockford P3 dual 2 15" in a slot ported enclosure, tuned to about 32HZ. I'm running that with a Cadence ZRS7000D. I understand the machanics behind sealing off the trunk, but I've never listened to sealed off trunk car. I'm wondering if they are purely for muscle, or can they be musical? Is it worth putting in the effort if I don't drive around with my seat folded down?? My poor trunk can't handle the pressure!

Well im swapping out my 2 SA10s each on an audiopipe APSM1300 for 1 SSA 10" XCON and i will be strapping both amps together to get ~2000w @ 2 ohms. It seems like I might get away with being able to use the same box and port length. The current box is 1.39ft^3 before displacement, making it 1.24ft^3 ... using the aero port calculator My exisiting 3" x 15" port will give me a tuning of ~30.8hz. Am i lucky and wont have to build a new box?

I'm starting a box for my new 12 this weekend. Using a 6" aero for this one. Most of my boxes in the past have been sealed or slot port. Was shooting for 1.75cf3 after displacements and a tune in the low 30's. I'm limited in depth (~14") but had plenty of width (~56"). I came up with this design. It's long and shallow, similar to a truck box I built a long time ago albeit smaller. Concerns: The length to height/depth ratio. Would it matter? The distance between the sub and port inlet. It is currently ~4" from port to the closest edge of the sub tuned at 30hz. I can move it in more, each 2" decrease in length equates to about 1hz. Just concerned about unloading. Maybe it w…

I have a small problem with my box, its too big now and need something smaller. We just had a baby boy last week and now I need the back of my van for the stroller so I need to build a new box that is smaller but still can use my two 10" subs and still be able to mount the 2 amps somewhere as I do not have room under my seats. Right now my box is 48" wide X 14" high X 12" deep, I would like to make a box that is taller rather then wider. I have 40" high X 14" deep to play with, the stroller is 21" wide. I was thinking of using the 40" high to make the box. I'm runing 2 X Earthquake dbx10 single 4 ohms on a Alpine MRD-M1000 @ 2 ohms so around 1000 watts rms. The box will …

Hey guys im considering getting this passive radiator for my Fi BL12 TC Sounds VMP 15" The reason is i dont have room to port an enclosure underseat but i may be able to fit this. If i decide to go this route im going to design a port for the enclosure and then calculate the mass of air in that port to add the the PR, is this correct? I just want to run this idea by you guys since you all know so much

ok i posted this on another spot on this fourm but i think i might have put it in the wrong spot....im building a box (hopefully my btl will be here soon) im going with sub up and port back....i was wondering if its would be best to put the sub over the port or closer to the front of the box or just in the center

Where can I get Bassorcist tracks? I see people playing them all over youtube but I cannot find anything!

i am planning on upgrading my system, but im still undecided if i should make it ported or a 4th order box, what will be the pros or cons of each, and what would be better it will be a blowthrough on a silverado, planning for 4 15" dc lvl 4 and a dc 5k, but right now i just want to build a box first, thanks

So I just bought a single Nightshade 15 for the trunk of my 2007 300C. I'm just gonna figure out what works best for the box so as to not block my spare. I was considering porting a box towards the back seats, with the sub inverted on the back of the box (so you can see it when you open the trunk). Any problems doing this? Having the sub inverted would let me fit the box more tightly towards the seats in my opinion, but I'm new to box building. Thanks for any help