US AMPS

I want to fit better quality tubes to a TU-600, do I need to re-set the bias/plate voltages or are the pre-amp tubes auto-biasing? if so where to I tweek the levels and where to I measure. thanks.

How low can a MD2 get? And power it will be putting out?

I took out my old PG Xenon 1200's and puttin in two 07 MD3D and man my subs love them and they are powerful.This is my old setup with the Xenons and now with the US.Man I am pretty happy with the new amps My car is under gallery section under Ultimate Atima www.Audio2000az.com

hey guys i just bought a DE-1000 but it did not come with a bass control or the usamps logo. Where can i buy these?? also does anyone have the specs to the de-1000? i posted in another thread but i didn't get any replies.

Hey guys little intro first, my names Lucas I'm 22 and I live in Orange County California. I'm currently running a Kenwood X591 HU and the US Amps MD-22 and a pair of RE Audio SR12D4's in a way oversized and kind of sealed box (leaks like a mofo). Stock 6.5 speakers inside for now : ( I can't really give much of a review on the amp because its only about 15 minutes old, but those 15 minutes were pretty good. A little hot but good. Question though the bass remote seems to be different than others i've used. It seems like it has no relation to the actual bass boost like the one thats on the amp. So what is it actually controling and is the blue light ever gonna come back on…

When is US amps going to update the web site? I hate the one thats up now? Can we call and make a complaint? lol

Hey has anyone purchased a merlin md3d from Ikesound? Are they a reputable dealer? I was browsing and found that they have the new model md3d for $500.00.

Ok so i'm changing the substage again. I also changed jobs. I work for a shop now that sells mostly cadence and RE/US Amps. Mainly RE for subs and cadence for mids and highs. So i'm looking at a system rebuild. Probably XXX comps for my Mids and hi's I only have a front stage. Gonna leave the Sundown SAX100.4 on them for the time being. So heres where it boils down. I'm looking to make some NOISE minimum 150s but be able to blend them into the system as well for daily driving. I'm looking at either 2 SX 10s or possibly 1 XXX or MX 12. My car really doesn't want to handle 2kw daily but we gonna make it work. Getting at least 1 kenetic 2400 probably for the ba…

never seen a re forum... jus curious on wut kind of numbers people are putting out wit a single 12" SX....

Hi there, just wondering if anyone has info and/or specs on a b100. I have seen it described as a "powered crossover" was this to sneak it into competitions? Any info is appreciated. Thanks in advance.

Hey I have a US Amps MD2D that the remote wire screw on it happened to break off in the hole that you screw it into. I was wondering how would I go about replacing the power ground remote block for it and how much that would cost. The amp was bought from an authorized seller at the time around 2 and 1/2 years ago. Its a 2005/6 model.

I've seen the specs for both and was wondering what justified the extra money for less watts on the AX2000HC (2400 watts) vs. AX3000DE (3000 watts). I know they HC is for high current (down to .5 ohms) but is there something else I'm missing?

It just fried and I wanna know where and how much it would cost to get it repaired. I just PM'd flakko about it and I hope theres a warranty that comes with it. but if not im going to have to cough up the cash and get it fixed.

How good is the exterminator line amps and do ther do their rated power

I've run the ed's before and they are solid and seem to be a great value. Looking at the IS 2080 for front comps and the 2200 for subs or the ed nine.2 and nine.2x. What do you guys think? The setup will be CDT EF 61 Neo comps up front and 2 10's sealed but not sure which ones.

can an re 15 be used for daily sub if so what would be the recomended rms power and sub box

yeah, i let my buddy borrow my 600x and now it wont turn on.. nothin on the board looks cooked... flacko get at me, i'mma have to send this sucker in for repairs.

does US amps have any dealers in Pa? Now with Kove making a return i am thinking about running some kove/us amps again. thank you.

Are these amps 2 or 1 ohm mono stable or would I be pushing it. I believe the 150x puts out 500x1 at 4 ohm bridged. Can I bridge it down further to 2 ohms or am I asking for trouble. Any input is greatly appreciated. I was also considering using the us amps optimizer with these amps. The 100x would power boston pro60 3 ohm speakers in stereo. The 100 would power boston pro6.5 in the rear in either stereo or mono, probably stereo. I was looking at picking up a 8'' sub and running it at 2 ohms off the 150x. Maybe a 8w7(3ohm i think), tc sound, fi, or soundsplinter. Am I asking for trouble? or can these works of art handle these loads all day long? This is all going…

I know they had some limited stuff in the past. Just wondering if there are plans to expand into this side of the industry.

So against my better judgement I bought a used US-AMPS DE-3000 off of ebay. The seller had over 200 positive feedbacks and no negs, and the price was too good to pass up; and the seller was NOT the guy-who-might-be-milo in the thread below. When I got it and hooked it up, it belched white smoke before I even put a load on it. One of the capacitors inside actually caught on fire, without blowing the fuse I was using to protect the amp, which was a first for me. Anyway, is there any easy way to look at the components used and verify that it was an original US-amps product? It has obviously been repaired once at least because the caps don't all match, thermal goo was appl…

Since there isnt a distributor in Canada anymore I'm wondering if there are going to be any dealers in Canada. Maybe US Amps/RE is looking for someone to take over for their Canadian distributions Might be better if they were to answer emails. Does anyone know anything about any of this?

Just out of pure curiosity, why did the old amps have all the funky colors? Any real reason, or just because?

I had a AX5600 in my car being ran active off a 9835, powering ID OEM mids, Hybrid L1 tweeters and 1 12" RL-p. I've pulled that system out to use the 9835 and amp in my dad's F150, but I'm probably going to stick with some passive TypeX comps in there and 2 E8s under the seat. My question is, are the AX5600 speaker channels bridgable? I'm going to run some old Type-R coaxs off the HU for the rear, but want to send the comps more power than just the front channels. Thoughts? Next, I'm picking up an XT800.2 and two XT800.4s for my car. I'll be running the same L1s, but pairing them with new 2ohm versions of the OEMs. The RL-p is going to be ran IB. I plan to bridge one of t…

what i've read on a local forum : USamps bought RE audio ...so i have to ask : is it true ? try not to gather the torches to burn me, because i didn't believe, so i had to ask here..