US AMPS

Just as the title states... Who wins in terms of SQ? In my eyes, the prices are comparable, and I've heard good about both. I'm leaning towards going with the USamps XT series over the GTO's... One major issue that shouldn't be so major is the looks... The GTO's a gawdy, and the XT's are plain & simple. Any thoughts or input on the comparison?

Bigg Boy at ***** Audio benched with an o-scope on a current XT4000D: ^^^ there you have it and thanks a lot!

after 3 years of asking it finally shows up:

I need some info on what the knobs do on the side of my VLX-400. LMK guys.

I have a old school u.s. amps VL-400 It recently fried due to lack of sufficient power. I am wondering if it is possible to get this fixed , looks like it needs a new board to me. Also does anyone know the specs on this amp? ... i have looked everywhere . I havnt even seen one on ebay (previous owner did the "custom" paint job. ) it used to be purple.

I searched the specs thats pinned but theres nothing about the older amps... a friend has the VFL 400 and i was woundering what it would do ??? might not be vfl ? but the amp is a Us amps & its about 7ft long

i got a buddy who has 3 vlx400 neding repair.i thought i read a post about some of u some of u guys saying only use the old school guys that handbuild the old school us amps? can any of u guys help him out?by giving me some info on him getting these fixed?thanks for the help

would like to get some numbers are they .25ohm stable link the older ones

has anyone used these amps how are they performing making rated power?

Does any one know what the real outputs are for the vlx-400 at 1ohms on 14.4 and 16 and can it take 18v? I have one I am either going to use or sale I have had it for sale for sometime but no body buying in this market so I might as well use it. Someone said it needs like 350amps to run good is this also true??

so, i was shown this amp by someone and found it on eBay for $370 shipped. i was wondering if this is a realllllly low price?... or the price in the SSA store is wrong? thanks -jonathan

How is everyone liking the vlx3de? what kind of power are you seeing?

what does everyone think about running 3 vlx400s on 6 15 inch incriminator death penaltys. clam shelled in a suburban ext. use all 3 amps or only 2?

Spy vid. Doing a little over 4K rms I have had it hit 7K but my power supplies are SAGGING and need to have the boss invest in a few more.

was wondering if someone could comfirm that the warrenty on an ax2000 is only 90 day over the counter and 1 year from factory.I read that the xtermentor line has 1 year over the counter and 3 year factory.Just wondering being that i just spent a few dollars on the ax2000 and the 4360 tube.

OFFICIAL WEBSITE Hey everybody! First off i wanna say thanks to Aaron and all of the SSA krew for having a USAMPS message board up in here! Well any questions you have about our products or the company itself, i will try my best to answer them. Remeber we are here for YOU. Also feel free to post reviews of our products NEW AND OLD! you can contact them by callin them toll free: 877 267 9360 or emailing: [email protected] [email protected] Again thanks for havin us here! Reminder: To those of you who are looking into buying an amp from us. The Xterminator line is the Cheapest, our entry line for those of you on a budget, but even for a budget amp, these…

Hey guys what are the real Dimensions ofthe 2007 US Amps Merlin Series? I'm interested in the MD-3D and the MD-21 but since i'm tight on space i wanna know the real Dimensions before i buy. Here on SSA I've seen that the MD-21 WxHxD is 7.9 x 2.5 x 8.75, on www.woofersetc.com I've seen it the same, but on their website it is WxHxD is 10.5 x 2.5 x 10.75.(now what?) The MD-3D here on SSA it is ?? x 2.5 x 8.75 WxHxD the W is unknow( wich in my case it's very important), on WoofersEtc.com it is WxHxD: 13.8 x 2.5 x 8.75 and on their WebSite it is WxHxD: 21.75 x 2.5 x 10.5, now I'm very confused and i realy need to know the real dimension mainly the W(L) thus how long they are…

I might be getting a us amps, merlin m2.d2 for my fi Q, just wondering how low of an impedance it can handle. Seeing if i can get 2000+ watts out of it @ 14.4v.

Hi, I'm from Germany and I have bought an US Amps Merlin MD-23 Amp on Ebay earlier this year. I never opened it because I didn't have time to work on my car. Today I finally wanted to look inside my new Amp and I was shocked. On the Packaging Box and the Chassis it says MD-23 but on the Board it says MD-22. So I guess I was deceived by the Ebay seller. But I wanted to be sure, so is there any attribute that could tell for sure which Amp I do have here? I'm looking forward to any reply you can give me =) Greets Eric

I just checked the specs on this amp and it is not very high only 200 if I am correct.The JL amp is something like 400 on damping factor.Can somebody correct me if I am wrong.The higer the better if I am right.

its goin in an suv i just wanna know what a good size ported enclosure would be as well as frequency for tuning since i cant find there specs from that far back

What size power wire does the AX-TU600C accept?

I am new to the forum but I am upgrading my amps and I need to know is the AX the top line and what would be the best amp for a JL 13w7 I am looking at least a 3 ohm impedence no more than 1500 watts.Has anybody heard a 13w7 to a U.S. Amp.I need to know as much as possible by one day thanks

www.myspace.com/us_amps woot! first time doing a myspace...6 freakin hours last night setting it up... i got a blog too check that out.

This place is where im gonna post some up and coming things for USAmps.