Sundown Audio

hello guys i have a question that i want to here your input on..... i have a 100.2 that i just recently got from jake.... last night i added a grill to my sub box, thats it. i then played some late night tip to check for clearance. at this time my mid basses were playing. my 100.2 running off low section on my 3 way on my 880 prs. the sub amp then daisy chains to the 100.2's outputs. Today i get in my car and noticed as i turned my car on and put my book bags in the back trunk, that the 100.2 wasn't turning on, it just constantly stayed in protect while my other 3 amps played including the sub amp using the 100.2's signal outs. i got home today and tried to see if maybe i…

How much power will an Saz1500d put out at around 1 ohm in a Honda civic with a stock alternator biggest battery that fits with out mods and an optima redtop in trunk? thanks for your time and have an awesome day. Z

How many people like 8" woofers? I have drawn up a design for an 8" subwoofer as a fun side-project but I find myself liking the design more and more as I look it over! This is what I came up with, wondering who would be interested: FS = 23.6 Hz Qms = 2.55 Qes = 0.350 Qts = 0.308 VAS = 21.2 L RE = 3.32 Ohms Z = 4 ohms Le = 1.668 mH BL = 12.73 N/A Mms = 113.46 g XMAX = 12.2 mm one-way by 70% BL method Xmech = 18 mm (the coil will hit the back plate at 18mm) Power Handling = 200 watts RMS Sealed Box Specs: 0.185 ft^3 0.707 Qts Alignment F3 = 55 Hz Ported Box Specs: 0.50 ft^3 Tuning = 30 Hz F3 = 28 Hz ----- This driver would also make a pretty solid midbass driver up to 100 …

Well, for all the Canadian people, JordyO from CCA did some testing on a pair of Sundown 1500's this week. And he did a drop test 2 sundown 1500's vs a stetsom 5k at a competition: Thanks Jordy!

The SD-1 v.2 protos are in... they take everything the SD-1 was good at and take it up a notch. 1) They are even shallower at only 4.5" mounting depth (10" model). 2) They have more linear x-max. 3) They have a 2.5" voice coil so they will handle twice as much power thermally. 4) They maintain the efficiency of the original SD-1. 5) They maintain the small box requirements of the original SD-1. 6) They maintain the low-end performance of the original SD-1. 7) They are now DVC 4 ohm for more wiring options. 8) They now have a rubber mounting gasket. These subs will throw down in very small enclosures and will now handle much more power. Ideal for shallow truck enclosures! …

hi, i am going to be getting an sax100.2, sax100.4 and a saz3000d. and i am wondering if this is going to be enough electrical to support it. 1 powernaster D1200 up front, 2 powermaster d3100 in the back, a 190 amp alternator (biggest one for my car) 1/0 big 3, and i am going to be running a ground run to connect all the batteries together. also the sax100.2 will be at 2 ohm. two of the channels will be at 2 ohm and the other set will be at 4 ohm on the sax100.4 and the saz3000d will be at 2 ohm(reason for the saz3000d at 2 ohm and not an saz1500d is that i might get a new vechile(sp) in a year and then i want to go for just spl in the new vechile(sp(. so then i will al…

Today my buddy offered to buy my eD Nine.1 and I am really thinking about selling it to him so I can order an sae-1000D. I have a 15" Q no options with a 4 cubic ft box tuned to 30 HZ. I am thinking about it because I was reading a topic a few days ago and they said that they swaped a 9.1 for a sae-1000D and there was a noticible increase in sound quality. I would have bought the sundown had I know about them at the time. I was just curious if you guys thought I might really notice a difference between the two. I may end up doing it just because I would feel more comfortable with the quality of the amp. And I am not really happy with the 9.1's sound quality...it…

I compete on a regular basis, and was running the Massive Audio p3000.1 @ 2.3ohm to a single SoundStream T4 15" --- when the amp went into Protection ( coma ) and did not recover, so i sent it into the factory to check it out ! they said it blew a Cap and it wasent covered under the warranty, so they charge me to replace the board, and charged me for the return shipping.... the box arrives @ my office crushed---- so i called them right then... there responce was its a tough amp go ahead and install it anyway, i protested... but they insisted... so i install it and go to work, that night i go to dinner with my girl friend ! she noticed it in the back and asked me to turn …

Just got another saz-1500d!! It will drive the 4 tens I'm putting in my '79 TransAm SE... just gotta get a wire kit and I'll be good to install yet another system!! The car: http://www.soundsolutionsaudio.com/forum/i...si&img=2675 The subs: http://www.soundsolutionsaudio.com/forum/i...si&img=2672

Today we had a gathering in hawaii with some other audiophiles.. some veterans and some new... I asked one of my fellow Sundown users to come down and demo the amp (a sundwon-3000D on a fully loaded 18" BTL)... No chit man his system was the biggest draw... everyone was gathered around his truck and wanted to just stick their head by the window.... Ride Truck x-treme (I think didn't really notice) 18" fully loaded BTL Sundown saz-3000D Iraggi 260 amp alt Kinetik batteries... The 18 BTL was a freaking monster and the sundown 3000D is a freaking BEAST........ With the windows fully down on both sides, we were doing hair tricks with GUYS LOL.... You couldn't sit in it witho…

Just sent [email protected] the money. I can't wait to get this and set up my fi q

after lots of time reading and learning i have come down to these two amps... give me your thoughts on these two goin head to head... i will be making a decision in a couple of weeks. i have stock 80 amp alt and battery... thanks for ur inputs -Yang

Does anyone have pics of these amps, close-ups of each end and internals in particular.

I got 40 pounds worth of today Corey

I am stuck between the Cadence TXA 6004 and the Sundown 100.4. Both sound like great amps with great warranties. What really are the differences other then prices?

I just recently bought new speakers and hooked them up to my 100.2. The first week everything went fine until about a day ago I get a random noises coming out of my speakers. With the sound completely down on the HU and even a different mode with no audio source selected I get this high pitched whine or sometimes clicking coming from my speakers. Once I hear it I shut it off immediately. I checked the ground, remote, and power wire and they are all hooked up and connected fine. All the speaker wire seems to be intact at the back by the amp and upfront by the actual speakers, but I haven't checked underneath the carpet yet. If I turn the volume up on the HU the music…

well i'm throwing my first show this month and would like some feedback from you guy's. 1-2 woofer's 3-4 woofer's armagedan (anything goes just dont break my sensor) first place winner's will win a 4 gauge install kit with rca's and anybody that enter's has a chance to win a custom box,2 10" subs,6.5" comp's or a small 2 channel amp. I thought this would be a little different then seeing all the same people win all the time.tell me what you think! oh and jacob I'm in need of a banner/sticker's for my show's or anything you might want to throw down thanx for the feedback peps

my best with the crx and loudest in colorado 153.7 yeah I know it's not that loud but good enough to take down a seven foot award.now i need more power jacob

That is all.

The old thread got cluttered and I think people thought I was out and forgot and left the thread pinned So, I started a brand new fresh thread... the blowout sale is still going on. ----- The SD-1 model is being closed out and discontinued due to sluggish sales. They will still carry full warranty as I will hold onto some of them for warranty replacements: http://www.sundownaudio.com/ppsd10.html -- 10" Model Information http://www.sundownaudio.com/ppsd12.html -- 12" Model Information These subs perform very well... see some first hand reviews here: http://www.soundsolutionsaudio.com/forum/i...?showtopic=9883 http://www.soundsolutionsaudio.com/forum/i...?showtopic=9264 --…

At what voltage is the sax100.4 rated at?

I just picked up a 3rd 1500D last night for a steal of a deal and might pick up a 4th in a few weeks if the guy decides to sell it. Is there way to wire one remote gain knob to both strapped pairs of them? If not how do you normally control multiple amps as I really like being able to turn them up/down from the driver's seat?

The setup: single DD 3518, slot ported, tuned to 32hz single Sundown SAZ-1500 Kinetik HC800 battery Did a 144.8 legal, sealed on the dash Did a 146.8 in the kick, outlaw Not too bad for 1500 watts, single sub setup, with no real power upgrades.

This showed up on my door today... I have to figure out where I am going to mount it and the 100.2 when I get that.

I recently just purchased a set of Rainbow Germaniums (150w RMS) and a Profi 12" subwoofer (DVC 2ohm - 50~350w RMS). Currently I have eD amps in my car (9.2 & 9.1) and I've heard alot of great things about Sundown amps. The SAX-100.4 caught my eye after seeing pictures of it, but not sure if it's gonna work with my setup. If I run Channels 1-2 to my Germaniums and have Channels 3-4 to my sub (needs to be 2ohm if possible), would this be a possible setup?? I know the Germaniums will not get the power it needs @ 100x2, but if I bridged the 100.4, then that is way too much power for them. Also, how many watts will the Profi sub be getting if I bridged the rear chann…