Sundown Audio

I see that the 1500D have 2 sets of speaker outputs. So the easiest way is to get dual 2 ohm, hook it up in parallel, then the internal are bridge for a final 1 ohm load. What if I were to go with dual 1 ohm (1 sub) wire it in series = 2 ohm, then bridge the connection to the amp, will i get a final load of 1 ohm? I can't tell from the manual if the external outputs are bridgeable. Please confirm. Thanks!

thought this was funny maybe someone can shed some light http://audioforum.termpro.com/cgi-bin/ubb/...pic/3/6773.html

has anyone tested this. is one louder then the other? and this can happen! my cyclop's were .2 louder when they were not strapped

just curious on what these amps weigh. 3000d & 100.4 trying to get everything totally figured out on the system and the car as far as if the rear will need to be lowered to get the stance i want along with the front or just the front alone with all the weight going in the back. thanks in advance Chris

Well i have recently sold off everything out of my daily driver to fund a new build in a different car. I also am working on a budget install in my daily driver to replace everything that has been removed and sold off. Im looking for a pair of clean sounding 6.5" componets w/ some nice out put for under 200 bucks shipped. Power will be coming from a 100.2 passive until the 50.4 comes out then they will be active. Thanks Corey

In case anyone sent me an important e-mail last night... I didn't get it. I had 1350 spam e-mail this morning and went through and deleted them... I did not find a single valid e-mail out of all of that, so I suspect maybe I deleted something important. So... re-send anything important that you sent me last night =)

I got first place in my class at a small local show with 3 RE SX 15" tuned to the low 30's and two sundown 1500's. My score was 147.2 playing a test tone sweep since I dont know my peak freq. We didnt even know about the show, and was actually headed to my family reunion when I saw guys getting metered outside of a car audio shop. I could get better numbers with a box tuned higher, but my setup is for LSQ, and I really like the SQ of my current setup. with some tweeking, I believe I can get 150db with my box, but I still havent had a chance to tweek my system with a mic. The SAZ 1500 is a badass amp that allows for a lot of flexiblity with installation.... I cant wait t…

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...OX:NEWLIST#LIST I requested that this seller list 100 pieces for me as I buy stuff from them all the time... they put 10 lots up for sale So grab em' while you can. I've used about 20 of em' so far in my truck build

Well, my TL finally came back so put the truck on the meter... my head hurts even with ear plugs AND hearing protective head phones on. First go @ the TL after finding the peak of 48 hz: Legal mic position too: Take a look at my collection of Powermaster D3100s, seven at this time: Used to power four SAZ-3000Ds: Dual Powermaster alternators for the win: While taking that last pic I realized that I forgot to tighten the ground on the top alternator... so I did so and run the truck again: ---- Not too bad! Now... it's time to get tweaking

Alright guys need some help here, since my car is in the shop and there working on the front im allowed to work with the stereo. Now i have 1 run of o gauge power wire from my front bat to the back to bats and i ahve a 200 amp alt should i add another run or two or is one run fine? just kinda wondering and i got 0 gauge jsut sitting aorund i need to use lol

I entered my Passport in a small sound-off at Hooters today. I'm running 4 Elemental Design 13kv2 in a sealed downfire box off 2 sae-1000d strapped at 2 ohms. It only hit a 143.2 with a termlab mic, but considering the flex that a Passport has, and the intense heat out there, I can't complain too much. No one did anything spectacular. I think the highest reading was a 149.3 in a higher class than me. BTW, I have never built a stereo for competition purposes (including this one) and this was my first time to ever enter into a competition, so I was pretty stoked about it.

Sundown SAZ-1500 on a single DD 3518.........

Well few of you know the tranny went in the buick that i planned on walling off w/ a pair of 3518's. Well i deside to start looking for a 88-98 silverado or siera to do a cut thro on. Well yesterday i ordered my second set of Digital Designs 3518's. The new system plans go as followed. Head Unit : Panasonic CQ-VD7003U w/ Panasonic CA-DC300U Ipod Adapter and 2GB Ipod Nano Sound Processors : Audio Control Three.1 Subwoofer : Digital Designs 3518's x4 Subwoofer Amplifier : Sundown Audio SAZ-1500D x4 (each pair strapped @ 1) Subwoofer Enclosure : 28ft^3 @ 35hz Wall Mids : Seas CD18RE-MDS H1426-04 x12 Highs : DLS Iridium x4 Mids and Highs Amplifier : Sundown Audio SAX-100.4 x2…

Can we expect the Nightshade to be similar to a BTL? Meaning they will excel in the same application?

I'm planning on purchasing the SAZ-3000D for my Nissan Sentra and would like to upgrade my alternator. What size alternator would you recommend?

Jacob, any chance of us seeing Sundown home audio amps in the future? I know you make some great bang for the buck car audio amps and I'd love to see that carried over to the home audio side of things.

finally got the front stage all setup, and painted and fiberglassed. Time to start building for the bass now.

Hi, how would someone go about becoming sponsored by Sundown Audio? I have a 2002 Nissan Sentra XE and would love to run a Sundown SAZ-3000D with my Fi Audio 15" BTL. If you would like to see my setup please check out my page on CarStereo.com. http://www.carstereo.com/rwussow Any help with this matter would be awesome. Thank you for your time and I look forward to hearing back from you.

http://www.sundownaudio.com/SD-1_blowout.html I added "Buy" buttons to the SD-1 blowout page for the SI BM 12" blowout sale

hi, i have a opportinty to get 2 12w7 ( svc 3 ohm) for cheap ( 500 for both) and i am looking at an amp for them before i get it and i would like to stick with 1 amp for price and i am wondering what does the saz1500d do at 1.5 ohms and also i have a 200 amp alternator. hc1400 under the hood and a hc2400 in the trunk and it is all connected by 1/0 guage wire and the other amps i am going to have 2 eclipse xa4000 amps to give you an idea of the power for the amp. i might add another hc2400 if i can get a good deal on it,

This thread will be the official "cleaning house" thread to move all used, b-stock, and refurbished amps as well as any other misc items for sale here at Sundown Audio. TO ORDER E-Mail me at [email protected] to confirm which items you want then Paypal me. THIS POST STAYS UPDATED regardless of original post date. ---------- ALL USED SUNDOWN AMPS HAVE 1-YEAR WARRANTY USED OTHER BRAND AMPS HAVE NO WARRANTY PENDING UPDATES. -------------------

Jacob looks as though you are coming out with a new line of amps, and with that being said any plans for a 2kw???

SAE-1500D Prototype - $200 shipped in the continental USA SOLD to fuzzyping! The heatsink on the prototype is not the heatsink that will be used for production and is one of two prototypes made in this case. This prototype does not make full rated power, but is good for around 1000 watts RMS @ 12.8 volts / 1200 watts RMS @ 14.4 volts into a 1 ohm load per my testing. The next revision of this prototype is under construction and will address the low power output as production models will easily meet their 1500 watt rating @ 13.8 volts (as all SAE amps are to be rated). This unit has 4 awg input terminals and 3x 40 amp fuses. ------ Unnamed Prototype - $250 shipped in the…

http://search.ebay.com/_W0QQsassZsundownz Freshly listed: 4x 1500Ds (used) -- buy it now $400 + shipping or try bidding starting at $350 1x SAX-1004 (refurbished) -- buy it now for $275 + shipping or try bidding starting at $225 Thought I would give the forum a heads up on the new listings Just put them up a few minutes ago. All five of the above will come with a 1-year warranty. (They may take a few minutes to show up if you are looking at this immediately after my posting it)

im lookin to buy either on of these amps for a 15 or 18 inch Fi BL, and was wondering which of these amps is easier on the charging system with only big3 upgrade?? i have a 105amp stock alt with stock battery, but i will have 1 yellow top and 1 or 2 red tops soon thanks