Sundown Audio

The subs are still going strong. I have been torturing them to say the least and they have been hanging in there. I have demoed them to plenty of customers and still love the expression on their faces when they exit the car.

I have heard GREAT things about this up and comming audio company! I have just upgraded to a fi BTL 18 fully loaded, so im now in search for an amp. I was wondering if anyone has specs on d class amp, more than 2000w continous. Where can i purchase an amp? Thanks for the help everyone

ok im sure this info is somewhere but i cant seem to find it.....i have a dual 2 ohm Btl 15 and want to get 2 1500's to strap....are they 1 ohm stable when strapped or only 2

I know you can run the 100.4 active. I "believe" using the SSF to make a bandpass. Does it do that with chan 1/2 or 3/4? The manual doesn't really explain much. Any help or links to a post with that info would be GREATLY appreciated as I'm doing an install for a guy this weekend and need that info asap. Or Mr. Sundown replying and setting me straight is always appreciated.

Ive been planning and install for over 2 years swapping out different components and subs and wiring and batteries and even cars. But I finally landed a good job and was making money I decided it was time to treat my self. Back when Jacob started SA, I was excited to get the new amps and was even going to test .5 ohm, yeah that long ago, is when i really started to plan this system, well a couple weeks ago I finally got it installed by Aaron over at Innovative rides. It was a quick weekend install and I just wanted the major work done. I still have to fix the dash and finish the rear deck, but I wanted to post how happy I was that it was done and how much I have enjoyed t…

I need to sell off some of my collection so here goes. ---------- 1x TC-3000 Dual-2 15" Subwoofer $325 + Shipping http://www.sundownaudio.com/misc/TC-3000_1.jpg http://www.sundownaudio.com/misc/TC-3000_2.jpg * Brand new, never even hooked up. 1x TC-5400 LMS Dual-2 15" Subwoofer $650 + Shipping http://www.sundownaudio.com/misc/LMS-5400_1.jpg http://www.sundownaudio.com/misc/LMS-5400_2.jpg http://www.sundownaudio.com/misc/LMS-5400_3.jpg http://www.sundownaudio.com/misc/LMS-5400_4.jpg Both of those are still in their boxes. I hooked up the LMS-5400 to make sure it was in working order. Will be packed and shipped properly. ---------- I have 2x DD 9512 F motors / G basket and …

I finally got around to a dry-run of my comps and amps last night. I must admit, the JBL P650c's sound every bit as good as I'd hoped. The Sundown 100.4 really makes them shine. But I've been thinking, isn't it a waste of the 100.4 to just drive the two front pairs? They run at 4 ohm, and I end up only using the first two channels of the amp. I also purchased a 100.2 to drive my RL-i8 DVC4, but I wonder if it wouldn't make more sense to swap amps and have the 100.2 driving the front stage and move the 100.4 to the sub? This would also fit much better (physically) into my vehicle, as the 100.4 peeks out from behind the driver's seat. Can anyone suggest the best scena…

Made a separate topic for regular voltage testing. Hopefully I can get more in-depth testing with a stronger electrical system soon. ----------- Pyramid 50 Amp Power Supply 8 AWG from supply to batteries Kinetik 2400 Battery Duralast 1000 CA Battery 2 AWG between batteries 4 AWG from batteries to amp Fluke AC current / voltage meter Sears DMM Measurements: 65.8 volts 49.2 Amps 1.33 ohm calculated rise from 0.6 ohm DCR ** 3237 Watts 14.4 volts rest dropping to 10.75 volts ** - Rise was higher than when I tested the 1500D, it was 1.08 ohms for that test. Presumably since my single run of 12 AWG speaker wire is heating up some much due to the extra power. I also did a few te…

hey guys i have been looking into getting the DQXS for my new setup i wondered if anyone has used this product or has any opinions on this product thanks.

alright im putting a new system in my 2004 pontiac grand prix here are the products Pioneer AVIC - Z2 2 Concept 9.2" headrest monitors 2 Sundown 3000Ds Two FI BTL 12"s fully loaded Now here is the question i have a sound stream BX-12 sound proccessor with 13.5 volt sub outs and also a Fusion EQ/CROSSOVER/LINE DRIVER with 8 volt sub outs. Now I should i include either one in the setup or im also looking in to getting the AudioControl DQS with the digital Control PAD. RCA's are high quality Kicker shielded cabling. If you need more info just post or PM me

So... I'm finally going to have a running vehicle with a system. It's been about 8 months since I've had a system in a running vehicle, pretty sad all things considered! But... it is coming along nicely and some photos of the progress are attached. *Under-Hood Wiring w/ Knukonceptz KLM 1/0 battery to chassis and battery to engine block grounds. Generic "0 gauge" wire through generic ANL fuse holder. The red generic 0 gauge is about the size of 2 gauge quality wire and is plenty for this install. All ring terminals are soldered... and yes, that is a much larger battery than stock. * Roughly 2 cubes tuned to ~32 Hz thanks to Rich (stratusrt01). This houses 2x Sundown SD-1…

I have a PDX-4.100 amp and I use the front two channels for components. I want to use the back two channels (200rms x2 bridged) for SD-1 subs. What would be the best combination of these subs for me to use to get the best bass? I can spend up to $250.

i asked this question last week if a factroy 140 amp alt, 2 hc2000's redtop, 4 runs and a big3 could run 2 1500d's and jacob ok'd me. BUT will that alt be able to charge all 3 batteries? i'm asking because not alot of companies make a HO alt for the 2000+devilles yet. it sucks. thanks in advance.

Up for grabs is a pair of 10" Sundown SD-1 subwoofers. I used these briefly for testing purposes, they will come with full warranty as they are very close to new. They do have speaker wire soldered to the terminals, though, pretend it's "direct connect" like DD Price is $125 shipped for the pair in the continental USA. These are GREAT with an SAX-100.2 to power them. I am running a pair of 10" SD-1s in my 2002 Civic if that tells you what I think about them

I'm going to run two sets of Infinity coaxials, so four speakers total. The 100.4 would be a better choice than the 100.2, correct? My sub will be run on a Sundown SAZ-3000D.

real stand up guy. awesome price, 600 bux... cant beat it. would 2 strapped at 2 ohm do damage to Hdc3 15 much? really excited. good things come to those who wait because i was gonna spend over 800+ on another brand, but these are what i really wanted to cop. appreciate that Rob E! SUNDOWN'S DA S**T!!!!

Some new window candy today... Should have some vidz of my setup pretty soon.

Well, got to hear my first set of SD-1 10's yesterday. Let me be the 1st to say that when I initially saw them, I was a sceptic and was wondering what the hell Jacob was thinking. But, I still wanted to give them a listen and see what they're all about. To my surprise, I was shocked and amazed by those little subs. I expected them to sound good, but what I didn't expect was the amount of output that a pair of $100 10's on 300 watts would have. I was amazed. With no real tuning time, just sticking the woofers in the box, hooking them up to the rear channels of a 100.4, and letting them rip. Needless to say I was impressed. Impressed enough that I picked up a pair of…

ok well there is nothing wrong with amp except for the fact that it draws soo much power them most accessorys in my car turn off when the amp trys to hit a real low note. my deck will shut off and so will my radar detector, which is hooked into the ciggy lighter. so im wondering what i should do, im thinking that its from having a lack luster electrical system that is not able to supply the car, and the amp with all the current needed to keep everything running smoothly. the odd thing is the car itself will run just fine with no problems at all. so i was wondering if i should run the subs at 8 ohm each for a 4 ohm load so the amp will draw less untill i can afford some el…

So i finally received my new saz-1500d and i had a question regarding the power wire. is 0ga wire necessary to run this amp? i have a run of 4ga right now and i am trying to avoid the trouble of rewiring if i can. thanks, matt

just wondering if i could beef up a paper cone with some resin on my ten's? can someone tell me how they did it? front or back?

well he put up a fight right till the last 151.8 today. made a new box with 8" aero port common chamber.and this was the number and result's from the first burp. so now to wait for some recone's.I might try some different coil's but I'm not sure yet what ohm these amp's are wanting yet. oh this was with 2 3000d's the second picture was of the other woofer. i just rolled the volume and poof it was gone and it only did a 146.?

port is 8" with a 3" flare. the bottom peice is going to be the back of my box.I still need to do some rounding and bondo but you see the picture's

Any idea when we can expect these bad boys or still looking at "some time in the undetermined future?"

sundown for the MFING WIN!!! these amps are bullet proof!!!! doing a 153.7 db at 43hz doing a 152.2 at 36hz!!!! bassrace a 151db not pretty but its dam loud and the van is falling apart!!! <------- sam horns daughter ... puts on all the shows! <------ she does 174db!!!!! my short vid of jasons van, before he turned it off