Sundown Audio

Hello Guys..I want to be convinced that I need to Purchase one or your Saz-1500d amps...I currently am running the Us amps Xt4000d and my Fi BL 15" Seems like It still needs more Power...It is fully loaded in a 4cuft@30Hz enclosure. My current amp just doesn't put out what I think the Fi speaker can handle...I really like your Amplifiers and would like to be one of the team...Could one of you who acutally own or make the amp give me some input about how it performs at 1 ohm....I really want one so my Us Amps amp went on sale today...Thanks guys..

broke 1 window latch and shattered 1 side window!! people wanted to know when this was going to happen , guess today was the day!!

ok a freind of mine came down and i ran some 8 gauge to his z1 to my car. my car with 1 nsb-90 and 4 runs 0 gauge did a 150.7 @ 1ohm on the TL my car hooked to the z1 with high output alt a nsb-90 and kinetik 2400 2 feet from the z1 did a 150.2 @ 1ohm we did get 1 test @ .4 ohm and it did a 152.2 but did'nt have enough time to mess around because we needed to recone his xxx's but i will be adding a very large battery to my system to see if i can't get my amp's to do .4 ohm for a show on saturday and i will post number's later this week

http://www.diymobileaudio.com/forum/showthread.php?t=13901

what kind of drop should i be seeing from a pair of strapped 1500's @ 1 ohm for a burp? I'm using a nsb-90 with the car off. it goes from 13.8- low 11's. is this right? i'm going to start and run my car in the morning and see what the drop is!

The SSA forums would never let me register for some reason. I tried it a ton of times over the past few months with no luck. I tried again today and it let me. Woohoo! So whats up guys?

what is the avereage gain when i pull out all the rear plastic????? i need to beat a guy in a local comp. i did a 151.4 and he did a 152.9 If i remeber right it was 2 db! Any help before next satureday would be great

I have been running my 1500d for about a month now. It was working perfectly until about 3 days ago. I hadnt been in the truck or anything for 2 days, and then i go and get in it and as im driving the subs are making a popping noise. I have been trying to figure out what the problem is, and i dont think it is any of my wiring. I have figured out that the popping only happens when the amp is shook or tapped on or of course the truck bounces or something while im driving. The amp works fine except for when this happens, which is frequently. Im thinking it might possibly be something loose in the amp or something. Let me know if you have a possible solution.

did a 151.2 today with 2 9510's and 2 1500's strapped @ 1ohm on one nsb-90. can't wait for the 3000's to come now SUNDOWN FTW

New woofers from Sundown Audio... the first run, which is available now, is a test run to see how these woofers stand with customers. I really like them myself and am proud to offer them. These woofers are 100% made in the USA of as many USA sourced parts as possible in a top quality factory. Sundown Audio will be offering the same warranty on our speakers as our amps -- 2 years limited / 5 year discounted replacement and the same applies to these even if they do *not* stay on board as a permanent product. If these are well received more will be built and they will stay on board as a permanent addition. These will be one notch below the "E Series" woofers previously discu…

Two sax100.2 amps some cadence ZXC-6KIT components some cadence ZXS-651 co auxiliary speakers some sd series subs from sundown please tell me what u think bout that setup and if i can do better for under 1000 dollars

Do you think it would be okay to install a SAZ-1500D and SAX-100.2 like the following pictures? The SAZ-1500D will be powering two TC Sounds OEM 10's and the SAX-100.2 will be powering a pair of CDT Braxial ES-630's. The pics are of a 350Z.

went from a 148.8 to 150.5 yeah new box ,longer port now to start cutting it down and see were she peak's @

Yeah, i was bored on my lunch break at 1:30 in the morning so i decided to take this pic haha. didnt turn out that great since it was on my phone and i had to crop it down but oh well. Thanks Jacob!

hi im wondering if you guys sponsor any cars. im asking this because my stepdad is the one to sponsor. type in gabe cestaro at google and youll see the car he built. he has been in good guy car mag and super chevy mag. he has a 62 impala show stopper, we will be at the dub show in charlotte comming up next week.im trying to get my step dad into car audio and be sponsored b/c his cars are the chit. come see the impala. we have a new car being built as we speak.sponsor the new car and all the hotrodders of america will want your amps.

I have 2 1500s coming to me and before i install them i want to make sure that my electrical will handle it right now i have a stock alternator on my bravada (blazer if you will) pushing ~110amps and 1 yellowtop optima my plan was just to replace the stock alt with a 300 amp one but seeing as these amps can be run at a higher voltage than 14.4 i was thinking of doing dual alts and running 16 volts on a 300 or 200 amp alternator (whichever is reccomended) and have a seprate battery in the back I would like to get as much power from them as possible so i will most likely strap them @ 1ohm (i know its not covered under warranty) I just need to know how big of an alternator…

well im upto a 153.2db now as my burp score 8 sundown 1500d's 4 dd 9515's (pre-wired) ****UPDATE**** this is with no testing other than throwing the subs and amps in and checking volume and tunning 153.2db burps score 152.3db bassrace (perfect start) 151.9db bassrace (later start) this is as clean as it gets untill i get to a 155db

anybody know when you would be able to pick up 1 or mybe 3 , and at what the price will they go for? is there going to be a preorder sale or waitting list? i would love to put them whith my 3 btl 18 fully loaded 1 for 1. the numbers seem to smoke my other options (mmats3500.5 or massive p3000.1)

I've got 2 dd 3515's dual 2 ohm, right now i've got 2 sundown audio 1500d's strapped @ 2ohms. I'm wanting to get 2 more 1500d's. my question is would the amps handle bein strapped @ 1 ohm daily? i wanted to ask first before i reconed the subs to dual 1 ohm...thanks in advance.

just did a 148.8 with 2 10's and 2 1500's. i'm looking into dynamat for my car but not sure if it will help. anyway's sundown FTW

Both my 1500D & 100.2 is getting hot under normal operation. Not so hot I can't touch 'em but pretty warm. The 1500D is pushing my SS RL-p D2 at 1ohm & my 100.2 is pushing my comp set at 4ohms. I run 1/0 wire to both & they are in an area where they should be getting a sufficient amount of air for cooling. Is this normal or should I be concerned? Thanks guys.

Any one know what the 1500s strapped will put out at 2.8 ohms strapped? I think I'm better off at 2.8 strapped than .7 with a lowered gain.

I got 8 dual 10" subs in a ported box I TOTALLY forgot about. So while the glue dries on the newsetup, I'mma hook the 8 10's up to the pair of 1500 watt Sundowns. Anyone care to guess the db's?? Box is the size of the cargo area up to the side glass in a 99 Explorer. About 4 inches shy of the tailgate. Tuned to 42 hz if I remember right. I'm thinking I can pull a 143 atleast. J

http://www.sundownaudio.com/ Site is up and running with it's new look! Big thanks to Brad Blankenagel for making it happen.

Well first comp of the season yesterday, I was not really prepared, my resin on my box wasn't completely cured, I hadn't done any testing, my car looked like crap... but I went anyways. I hit low yesterday, but was having issues all day. Final run for head 2 head eliminations was a 139.1 in street A. Good enough for first place. Street B was won by TJ (goes by old/skool on termpro) with a 151. something. Street C was won by my friend Matt in his ford festiva with a 138.6. Bob the guy with the blue van and all the t3 woofers was there doing mid 60's all day, it was impressive. Bassrace, I came in third in the 139 class, I wanted to be in the 129 class but qualified with…