Sundown Audio

i have 2 sa 12's the box is .75 mdf outside measured 40.75wX12tX20d. im looking for a tune of 35hz looking to do meca as well is been a while. where do tune need to be for headrest still tuned high or lower? whats the best way to change the port for competing? subs up port rear

Ive had to scrap my original idea of using a single 8 due to the port length / space limitation for where I wanted it. Ive decided to use the pair i have and not worry about the space required. Im guessing eclosure volume would be double the single so 1.2-1.5 cuft, what should my port size and length be? this will be for every day use thanks

I got a sundown saz-1000d in trade.since dont have any subs yet i unhook my four channel amp to see if the amp worked. when i turn my radio on the fuses pop.i only hook up the power and ground the remote wire and the rca up.i was thinking it could be doing this because im using 8ga wire and i have a 80 amp fuse under the hood. when i hook my four channel amp back up to the same wires it works just fine. i went to the part store and to get my fuses and everyone pop on me.i replace the fuse with 25 amp fuses.what could be causing my fuses to pop?

NeoPro-8 models are now SOLD OUT. Also -- all NeoPro speakers will face a small price increase due to the Neo cost increases. The next run of NeoPro-8s will include 4 ohm models as well. We will have more in stock in June... the demand for these really snuck up on us exponentially rather than just a gradual increase so supply was literally pulled right out from under us! We should have more steady data on the demand in the future on these. New / Old Pricing : NeoPro-6.5 : $99 / NA NeoPro-8 : $105 / $99 NeoPro-10 : $129 / $115 The 10" has a much bigger piece of Neo in it so was more affected. If Neo goes back down in the future we'll adjust accordingly -- we may also offer…

Just got this today. Representing Sundown at shows. It's just like my SA-12 except mine got stitching. Closer view.

Been here all weekend with customers and whatnot anyway... so decided to drop one in the Jeep real quick. The Jeep hasn't had much love lately and I was using it to haul scrap metal for a while (hence the wooden truck bed) but I decided to break it back out. One 4500D @ 1 ohm with one extra SPV-70 for battery. My box has a pretty high rise so probably seeing 3-4 ohms or so actual on the amp so not a ridiculous amount of juice yet. Sub still has a good bit of usable throw remaining. So I guess the next phase is to actually put in a more usable battery setup for multiple amps and use two amps at 0.5 ohm to get the sub to full stroke. Not sure yet if that will get done …

Hey gang building a box for 2 sa12d4's and trying to figure out how many aero ports and what size. I would like the box to turn into the low 30's box dimension are 16x35x19 could go deeper if needed. thanks in advance

Exceptional customer service! I bought 2 Sa-12's locally but forgot to take my DMM with me so kinda took a risk buying them.. One came out to be dual 4 ohm which the guy "didn't know about".. Ohh well. My friend ordered a recone for me but put no adress and left out some necessary info. I get an email from Debbie at Sundown notifying me about it and asking me the info that was left out. Before my friend ordered it I asked Jacob questions on pricing and how about to order the recone.. Didn't take much for him to get back to me. For the amount of emails he receives and work he has to do to get things taken care of, I am impressed I love their CS and products. Will definat…

Original thread is closed as ordering has been shut down. They will be leaving our factory March 8th - 13th and arrival time is 25 - 35 days... so we will be from 1st to 2nd week of April which is a bit behind schedule but not too bad. We sold such a huge quantity it will probably take 2 weeks or more to get them all tested and shipped out. If any stock remains regular ordering will open back up after that point. We have to make sure that we have enough fully QC passing units to supply all currently paid pre-orders before taking any more orders. If you missed out... we have two more production runs scheduling for arrival in ~May and another for arrival in ~June-July but t…

I was wanting to know on the amps, if you have to use both speaker channels or can you just use one channel. I'm running my 2 dual 4 ohm subs, wired to 1 ohm.

Sorry if this is in wrong section, I'm helping someone who's getting screwed over. http://tinyurl.com/BewareOfChrislun Just trying to help this get settled.

Okay, I have gone ahead and built the shell in my car and I have between 23-24 cubes total. My plan is to run 8 sa12's off 4 saz1500's. My main concerns are with port. If i do all 8 on a flat wall i can get about 187" of port. If i go down to 6 subs I can get upwards of 320" of port. If you go with a smaller port do you want to go with a smaller box? or Would it be better to go big box small port? I usally go with a 14" per cubes on port area with most boxes i build, but this one I just cant get the entire 14" with 8 subs. I had also spoken to DJ and he was said 187" in 14 cubes should be good, but i woundering if there is any rules about port area-vs-box size... …

Welcome to Sundown Went live yesterday. The biggest upgrade is behind the scenes... the new software actually allows us to do more modifications so we don't need to bug our web guy (aka: taking forever for us to get around to it). I have already started filling in lots of missing information, pictures, and typing descriptions. Comments / big reports are welcome at this time. Some information is not there YET -- mounting data, specs, etc... that stuff is coming soon. We are absolutely slammed with woofer building so that takes a bit of a back seat. I may also get even more technical in the descriptions as well -- I am sure everyone enjoys that. Also the dealer locator is M…

Basically, I have just bought two (more) ReSponse 1500 watt amps, same board as the SAZ-1500. These amps are protection happy at 0.5ohm per amp, which puzzles me, as I have used two others in the past, (one borrowed, one mine) that happily played everything, wired at 0.5ohm daily... Does anyone have the schematic of the protection circuit in the sundown amp? so I can potentially compare values, or possibly someone can point me in the direction of what components may need to be changed? thanks!

I've looked everywhere but can't seem to find the cutout diameter for the E12. Anyone know what it is?

How many watts will I see out of this amp at this load? Looking at running the JL Thin woofer.

Ok, so some our Team Sundown guys got their NS-1's and clamped them on a resistor...this basically means there's no rise the resistor pack used for this test is 0.7 ohms Power supply 8 Stinger SP 2150's resting at 12.9v measured 80 volts 114 amps voltage drop 11,8v Power: 9120 watts guys said the amps is a beast in terms of low impedance stability, stayed cool the whole time the vid Effficiency 984 Amps of draw at 11,8 volts 78% efficiency at 0.7 ohms is damn good

Just a quick question. I am on a quest trying to create a small enclosure for my small Jetta trunk and still have usable space. Slot port enclosures take up a lot of room that a standard Aero Port doesn't. Would a single 4" Aero Port tuned to the right length, be enough for two SA-10s in a reccommended specification enclosure powered by a SAX-1200D?

New 2012 Model Amps will start to roll out in May this year. We will be out of stock of almost all amplifiers until that time. We apologize for the period of no stock on the amplifiers but this is necessary to further increase the quality and performance of our products. We expected amplifier stock to hold out until May but record sales have made that impossible so we do appreciate all of our dealers and customers and their continued support. Stay tuned for information coming soon on the new 2012 models! Specifics : * SAX-125.2 still in stock * Final shipment of 2500s / 3500s due in about 30 days * Stocking dealers like WoofersEtc.com will still have some amps for…

Hello.I am from Russia and my English is very bad... I want to ask for you the help. I have 2 subwoofers sa-10, and to build a box I be not able. You couldn't throw off the drawing of a box for these subwoofers with adjustment 33-35Hz.Help me please.

I have done a lot of searching and can't find anything in general to the problem I am having. I am ready to pull the trigger on the pre-order of the SA-8v2, but I cannot get the enclosure figured out. I am not looking for a pure SPL, or a pure SQ enclosure. I want to be able to listen to it at normal volumes for most music, and then dial in the remote knob when the bass is pumping on certain songs. I want a small vented enclosure with 1 D4 SA-8v2. (I want a vented enclosure because I haven't heard any success stories with a sealed enclosure) I will be powering this sub with a SAX-1200D (I know it is overkill, but I want the option to add a second or a larger pair of subs…

Ive been loooking for the past 2-3 weeks and cant seem to find someone selling it.. I cant afford 1000$ for a brand new.. So im looking for a used one.. Need to push my AA mayhem 15 with it or if anyone has a 15' nightshade v.2 i would be really interested in buying that too!!

The box is built for 2 Sundown audio sa-12's tuned to about 35z with 2 2" ports and i was wondering if those would be a big enough ports or if i should take out the middle separator and make it one big 3" port. The end goal is to have the least amount of port noise possible. This is with the 2 different ports This is with the single port And advice would be greatly appreciated.

Again... these are all sold and accounted for. Watch out for next pre-order soon. Should be much faster this time as our rectifiers are in stock now. We'll be testing them and shipping next week.