Sundown Audio

Curious if anyone on SSA has purchased the X series subs?

As of March 31st, 2007 the "Z" series amplifiers will no longer carry 0.5 ohm warranty coverage. You can read a more complete explanation as to why this came about here: http://www.soundsolutionsaudio.com/forum/i...?showtopic=7556 Old SAZ-1500D 1/2 ohm warranty coverage thread for amps sold before March 31st: http://www.soundsolutionsaudio.com/forum/i...?showtopic=7151

LET THE MADNESS BEGIN >

Pre-Order open as of now - be sure to get these while you can as I think the first run will go quickly. ETA is mid to late June for arrival of these woofers. As always, with a pre-order the ETA is subject to change based on shipping delays, etc, etc. PLEASE do not pre-order unless you are okay with any delays that may occur. Regular MSRP will be $239 dollars - right at our low 200s target Shipped prices in Continental 48 states -- contact me for AK and HI -- USA ONLY pre-order! Paypal me at [email protected] to pre-order. $175 shipped for ONE $330 shipped for TWO $620 shipped for FOUR Ask about more than that. Two of them in my Jeep has done up to 149.7 dB in …

I thought this woofer's basket was gonna be purple ish, but the blue is just sexy. the dustcap = sexorz. very well built woofer. the 2nd one is comin in tonight so umm whats the cone made of? and whats with the shineyness?

Current clamp shown @ 19.4 amps 19.4 amps x 120 volts = 2328 actual watts Sub is still okay - don't worry! I just unhooked it at the end.

* E8 and Eminece Pro-Sound 8 in the door * Selenium PA tweeter down in kick panel Still under construction but they are LOUD

Anyone know a sub box build for a saturn ion 2 coupe. i would like it to be in the low 30s thanks

I have 2 SSA Icon 15s and wanted to know if I should get the 1000, 1200, or 1500. I read on here that it if I have a bigger box then I will need less power and also that the 1200 can out out as much power as the 1500 on a normal, daily, unstrapped setup. Would there be much of a audible difference if I use the 1000 rather than the 1200 or 1500? 2 SSA Icons 15s 8 cuft ported box tuned to 32hz **I know everyone will say 1500 but I m thinking about the price as well and would it be worth spending hundreds more for a little change. I was leaning towards the 1200 because of the power it can give out or the 1000 because I have a big box and need less power.

I took some flex videos today. Not nearly as powerful as Meade or Assman, etc..... But not to bad for 2000 watts of Sundown power and two 15's that are 600 watt RMS from a trunk car. Playing Airforces by Jeezy. Can't wait to get my other subs so I can get more power in the car. http://s278.photobucket.com/albums/kk91/ba...rrent=Flex1.flv http://s278.photobucket.com/albums/kk91/ba...rrent=Flex2.flv Edit: It looks better in person.

When is the estimated arrival date?

well since some of the team member's have them what is the good word? what ohm you running? voltage? test's result's from amp swap's? any problem's? burp or roll? my first one should be here next week and I want to get ahead of the game.

this is supposed to be a top of the line amp and im so unsatisfied right now. well of course it hits really hard and most likely has the ability to kill my subs but still for being a top of the line amp it has a problem. like i honestly thought since it was described by so meny to be the best, i thought it would not have any problems. The amp works fine i know but thats not what im pissed about... MY BASS KNOB LED DONT WORK!!! like come on mr fuller. jesus... haha im just kidding, great product, and i was just wondering if the led on the remote was a common problem.

what would be louder 3 sa-8s in 1.8-2.0 cubes @ 35hz with 500 to each sub or 1 sa-15 in 3 cubes @ 35hz with 900-1200watts this will be in a 850 wagon subs up port back. trying to go for numbers and sound ok

I have four subs that the speaker leads burned through. What would cause this? Same amp ran all subs. They died at same time. Would amp putting out DC do this? Coils are fine. I am stumped.

Ok, got my 3000d today. Wired it to 1/2 ohm, and it just doesn't seem to be putting out power. i had the gain set at about 1/2 and it just seems like it's not puttin out the power. voltage read 14.53 and amp read exactly 0.5ohms. Also, when i turn it up to where i normally listen to it at the subs start cuttin in and out so i turned the gain down more and also turned the sub control down to like 5/15 and it still does it. Voltage barely drops, and it's really not loud AT ALL. what could be the problem?? Also, the amp never went in to protect or anything, i'm stumped...

Sundown Team, I am looking at the forum about this but I can't seem to find any article discussion the difference between the two good sub aside from its RMS. Thanks

currently i run 2 12s off 2 1500ds... i am am having issues with wheter to stick with the 12's or change baskets and softparts to 15's... but before i go that route i wanna know how loud can 2 12's get in an optimal enclosure to acheive a little more loudness and range from these subs. as of right they they are crazy loud!!!!! but you always wanna a little more to see what these beasts can do. i've been talkin to pete about another box for my tweles and possibly 1 if i choose to recone them... we were working on a design that will have the subs drop as low as 15-20hz and still sound good all the way up to 90hz (daily beater) the box i have now is 4.4 cubes @ 35hz and real…

Want to know if i can run this amp on stock alt with stock batt up front and a d3100 in the rear big 3 and one run of 1/0 to rear, will be running it at 1ohm, on a pair of Xcon 12's. Thanks

it broke my jeep....

Built one yesterday almost full production specifications -- only difference to production is a small change to the coil (those coils are not in stock yet -- they are the last part I need). Specifications : RE: 1.9 ohms (D1 in series) FS: 42.2 Hz (5 minute break-in) Qes: 0.480 Qms: 4.024 Qts: 0.429 Le: 0.980 mH Vas: 49.725 L BL: 16.238 NA Mms: 251.09 g Cms: 56.48 uM/N Sens: 90.76 1w/1m Sens: 97.00 2.83v/1m FS will drop along with Qts as Cms increases with break-in. * Light weight cone with narrow / tall surround (standard) -- the Nightshade cone can be used for ULTRA high power applications * Single lead spiders (standard) -- double lead are optional

Jacob, I was wondering if you/Sundown ever considered making endcaps to go on the ends of their amps to cover all the wiring, knobs, inputs, etc... Also a space or cap two go between two amps to make it look like one continous amp would be sweet... So you would have Endcap|Amp|Endacp or Endcap|Amp|Spacercap|Amp|Endcap They look sweet the way they are, but I think this would really clean them up.... Thoughts?

* SAE-800D, SAE-50.4, SAE-1200D * SAE-800D, SAE-50.4, SAE-1200D, SAX-1200D * SAE-1200D * SAE-50.4 * SAE-800D * 800D / 1200D * SAE-50.4 ----- The 800D did well and exceeding ratings but wasn't really THAT much stronger than the 500D -- so I likely will not end up making it. The 500D will be named 600D based on the testing results from it (over 700 after impedance rise). The SAE-1200D did very well, though, and is pretty much on par with the SAX-1200D in terms of power but not quite as small in size. So far what I have pricing worked out is like this : SAE-600D -- $200 MAP SAE-1200D -- $285 MAP SAE-50.4 -- $155 MAP Pricing from an authorized dealer. Testing on the amp…

He said they pull less amps and have more adjustability. He also tried to get me to get a W3 over getting an SA12 He looked up sundowns website and looked at their product and said it looked great and all but JL was still better. LOL What do you guys think about that? Also 3 different car audio shops I went to hadnt even heard of sundown. I tried telling them they are a top rated company on the car audio forums and they all looked at me like I didnt know WTF I was talking about

are u still taking pre orders on them? how is the sound quality and out put with them tuned low 28-30? thinking about selling my IDQ15s and kicker zx1000.1 and going with either 2 sa-8s or 2 ssa dcons. either way i go i would like to get a sae 1200 to power them. like the idea of running 8s to show ppl wat they can do. front stage is going to be ID ctx65cs powered by a sax 50.4 bridged