Sundown Audio

I ordered two neopro 10's on Friday and was kinda hoping to have them this week, however I've recieved no further correspondance from them since and is like to know an update. Does anyone have a phone number or direct email link?

Sorry for the multiple post. I wanted this in the Sundown section, so reposted here... My son really likes the SA8s and wants to upgrade his stereo system. Can someone help with a box design? I assume someone has done this already and has posted a box design of what they did. I've been looking but have found some crazy installs. We only want to do two subs. Ported since that is the recommended design. If going sealed does not hurt that much, then that would be an easier build. This will be our first sub project together so want to do something on the easy side. We built a pirogue so have skills. BTW, he will be powering these with a Cadence ZRS-2002 going with 2 channel,…

Ive got a SAZ-1500D hooked up to a Fi Q 18. It worked great for about 2 months, and all of a sudden the sub made a pop noise, and the amp went into protect mode. Since then, whenever you turn the amp on, the blue light will come on, and then a couple seconds later the sub just goes all the way down (pop noise), and then the amp almost immediately goes into protect mode. It will do this whether the speaker wires are hooked up or not. The local car audio shop told me i blew the amp, but i took the cover off and everything looked fine. anyone know whats going on?

Hey guyz I'm about to order an saz 1500v2 could I strap another saz 1500 that's a v1? Is that ok or will they go kaboom? Thanks

I am building a competition van for a customer and it will have either 16 XS Power D3100s or 20 2400s (working on sponsorship), 4 Kicker Warhorse amps, and a deck mounted in rear for burps with a audio control line driver (8v). This will be walled off and strictly for Competition use only and tuned around 70HZ. The customer wants to go with Kicker Solo X 18s but I am currently trying to get him into Sundown Nightshade V2 18s. There will be 4 subs and each one will be hooked up to one warhorse at full power (approx 10k rms each sub). In the van already i have deadened the cabin (this is only modification allowed in front of B-Pillar in USACI Modfified Division), ran 2 4/0 …

so i have been asked a few times and have done my fair share of looking and asking.....what is the 1 ohm 2 ohm and 4 ohm (mainly 4 ohm) rating on the NS1? i cant and others cant seem to find these any where apart from its a beast. we compete USACI in my area and 3 of the guys in or close to the 160s really want to know this to see if they can be in the classes they want with this amp. I also have heard it will have 1 rating only 600 rms @ 4ohm which would be killer in USACI but whats the truth to this? Im tired of getting the run around or answer-its a beast when i ask. my customers are really curious too and keep asking if i have heard anything.....so please JACOB straig…

official 156,1 best 156,6db class up to 6000 Rms 2xsaz 500d @0,25ohm each 2xaq hdc12 2xKHC2000 +Hollywood Energetic SPV-120 plan for 2012 2500d---> ns1 aq ----> ????

I have a sa8 that's dual 4ohm. I can't wire it to 8ohms there wouldn't be any power. So can the 100.2 go down to 2 ohms bridged and if so how many watts would it push?

what cubes should i be at and the hert tone? i was thinking about 1.3 tune to 32 hertz off of a 1000 watt amp any help would do thanks, looking to build a box later today

Just looking to find out since I cannot easily see it posted already anywhere... If I get (2) SAX-1200Ds and link them together, what kind of output would I be looking at?? Mainly looking to find out if it is 2ohm stable if linked as well.. Thanks for any help fellas..

Can't find a number anywhere for them. I have tried the email thing twice in 3 days. I want to give them money. Anyone know it??

The 6.5" is NOT yet available... just testing the sample. Very smooth measured response on these... can cross as high as 4-5k for tweeters that don't like much mid-range output. Measured open baffle -- in a baffle low-end would increase on all of them but you can see the trend as the very deepest bottom end increases as you go up in size and the top-end increases as you go down in size.

I just want to make sure I have this right. right now I have (2) 4-ohm 10's in my doors ( one 10" in each door). one 10 on channel three and one on channel 4. (channels one and two are occupied by my tweeters and horns and I'm good there). now, I want to replace them with two sundown neo-pro 10's which are 8ohm. am I correct in thinking that I can wire them together down to 4ohm and then bridge them on channels 3 and 4 to get the most power out of my 100.4? how much rms will that amp produce to those channels in that configuration? Thanks guys

Some of you have called and had a "new" guy answer in the last week -- Nick is now answering phones for part of the day here at Sundown. You can talk to him about most of your questions -- if he doesn't have the answer you can leave a message and Brandon or I can e-mail you back from the message but please at least leave a brief message for us. I am often not here @ the shop all the time now due to other projects so we are getting a bit more help around here!

I was just wondering if the saz-1000D would be stable at .5 ohms. dont really wanna try it without asking first. thanks guys

My SAX 1200d just got shipped today from DB-r I can't wait to get home from my deployment to install that bad boy I believe my Fi BL 15 is going to LOVE it. I just had to share!!!

Ok got a little creative mood again, and someone had asked for a blue theme sundown wallpaper so I came up with this today, hope you guys like. You can download the zip which has 3 sizes from 1920x1080 to 1280x720 here Sundown Wallpaper 2

Seems it was a pretty hot topic so more information on it now. The market I am targeting is retail dealers -- the products this amp will compete with are primarily items from Memphis, Alpine, JL, Rockford, etc. SAE-500D prototype size not counting power terminals and RCA connectors is only 9.5" wide x 1 7/8" tall x 9" long -- this will vary a bit when we tool our actual case but will be quite similar. Cost will be $200.00 from an authorized dealer. Comparison to products in direct competition from authorized online sources : Memphis (1 ohm / 60-amp fusing) : $339.99 7.83 x 1.85 x 11.45 Memphis 16-PR1X500 JL (Class A/B / 2 ohms / 60-amp fusing): $299.99 14" x 2-1/8" x 7-11…

On June 24th 2011, I ordered a pair of Sundown Z-18 v.2 D2 Subs from woofersetc.com Roughly a week and a half later the subs were received but when unboxed the basket of one of them was severely cracked in 2 places. I contacted woofersetc, and they set up a claim with fed ex. Roughly a week later fed ex came out and picked up the sub and due to some type of miscommunication it was shipped all the way back to CA. The sub wasn't supposed to go back, due to a shortage of baskets they were searching high and low for a basket and I was going to get broken sub back, transfer the magnet assembly and re-cone it myself. After several phone calls and emails to both sundown a…

done by one of the local install studios

So after getting a hold of a clean logo for sundown, I was working on some other things when I just got an inspiration to do something creative. So I spun up some BT laptop symphony and ripped this out. If anyone wants a high res version 1920x1080, just let me know. probably do some more later, just got lots of house work to do today and I am procrastinating! LOL

Running off one SAZ-1500 in 6 ft^3. Two sets of Peerless 6.5s and selenium horns handle the mids and highs. Sounds great and still have some storage room.

WoofersEtc.com - SAX-200.4D - Sundown Audio 800W 4-Channel Amplifier MAP was $815 on these - they are being sold at over 25% off that price now from WoofersEtc.com exclusively. Get em while they last

100-watts RMS 8s / $99 each from authorized dealer 200-watts RMS 10s / $115 each from authorized dealer Frequency range is ~80-5000 Hz on these -- the bottom end crossover point depends largely on how much power is ran to them. 8 ohm coils for large setups where you would be connecting 4 per channel to an SAX-125.2 or SAX-100.4 or 8 per channel on an SAX-200.4 These drivers are extremely light and relatively shallow so will fit in many locations easily and also will not weigh down doors with large quantities of drivers as bad as ferrite drivers. Standard Madisound grilles should fit them -- we will test it shortly.

Threads for the NS-1 so far : NS-1 and SAE-500D Prototype Pictures - Car Audio Classifieds Amplifier Stock News (Announcement Inside) - Car Audio Classifieds ----- * 6x SA-12 for testing * NS-1 dropped in for testing with various meters * Derrick has 3x XS D3100s and 2x Mechman 300-amp alts * DC Current Clamp Derrick measured 7100-watts on MY Extech Clamp meter and captured 82v with his RMS volt-meter -- so we calculated that to be 0.95 ohms actual with rise from 0.33 nominal. Voltage dropped to 12.3 volts with 646 amps of measured draw on my DC clamp meter. We let everything cool off for a while and hit it again and saw 7200-watts as well but didn't grab all of the …