Sundown Audio

Well my sa-12 stopped working and I took it out of the box and found this black stuff Idk what it is Is this normal to break and can you fix it? I didnt even have it installed for a month.Help somebody

If I have two 1-Ohm 12" FI SSD's with the VC wired in series, and the speakers wired parallel making it 1-ohm. If they are hooked into a Sundown SAZ-1000d does that give the both of them 1000 watts (approx) a piece or do they both share the wealth and get 500 watts (approx) each?? In the same aspects of things, if there individually wired with the VC's wired series = 2 ohms, if the amp puts out 600 watts @ 2-ohms, does that mean there getting (approx) 300 watts a piece?? I'm being held by pirates and this is the only thing that will set me free.

So I am wanting to build a new box for my 3 sa10's mainly just to see what I can make these things do with different tunings and box volumes. They are pretty underpowered for now on an aq1200d at 1.33 ohms. My current box is 4 cubes net at 34hz. Just wondering if I should go down in volume or keep it the same? The main reason for building a new box is just for fun/practice I have the wood and time and want to try something different. I will build another new box when I get more power. Any tips or suggestions are appreciated! Thanks -Rick

Does the SAZ-2500D come with a remote bass knob? I cant find any pics...

I decided to make the switch to these from my Image Dynamics X69s. The X69s were awesome because they were a breeze to install. They did not come cheap though. My biggest gripe with them is that well they basically kept falling apart on me. I had the voice coil separate from the cone three times. Yes I was giving them way beyond the recommended power, but the coils still never even smelled, the speaker just came apart. I was able to sell the pair to cover the cost of these speakers and some luckily. First impressions unwrapping, the cone is not a beauty to look at lol. I wasn't expecting much, but next to the X69s the cone looks, well cheap. The basket and motor are a di…

I already tried searching the web and the forums, but I cannot seem to find a quality image of the Sundown Audio logo. Would be great if someone could supply me with the Sundown Audio logo. I prefer a vector image. Anyone care to help?

I think I found out why my subs stop playing

Shop will be partially closed next week. We will still respond to as many e-mails as possible and as many products as possible will go out. We will not be open for phone calls or be at 100% shipping / building capacity. Don't worry, though, after next week we'll be back to work and we'll have an extra worker at least for the summer ! Also -- bit of a hiccup this week. My accounting / book keeping computer went out over the weekend. I ordered a power supply for it next day air yesterday -- still waiting on it to arrive to start going through orders to enter and ship. Hoping it arrives before lunch so I can get some work done today!

SA-12 with D2 coils just sold out about 5 minutes ago. We still have SA-10 D2/D4, SA-12 D4, and SA-15 D2/D4 in stock. A container of all SA series 10,12,15 is due around June 20th. The SA-8s are not due until mid July.

by looking at your products alone you know your shit about subs. i have a pair of 10's i had built for me a couple years back 60lbs each so there is some serious magnets on them. the bl/re in series is only a 92 im guessing this is due to the coil. if i had it rebuilt to something with twice the motor strength what could i see in output diffrence? current coils are round copper 8layer not sure on what the rest of the specs are. i know they could use a spider spacer for more travel they will hit the top plate before the coil can bottom. is it possible the charge is weak on the magnets?

Ok, I contacted you guys via Facebook to ask some questions about how the Nightshade V1's, and I have yet more questions, but I figured they would be best suited for the forums to inform other people with similar questions. First off.. Do you sell a recone kit for the NSV1's and if so, what's the price? Secondly, I know you said 2.0 Cubed is about right (NOT PORTED) for the NSV1, but I'm sick of seeing the same square/Rectangle boxes, with the same slot-ports. Any ideas on a cool looking (and still functional) box? All would be done with 3/4 MDF, and if so, what programs do you recommend for designing boxes? Thanks SD, you guys have fulfilled my Audiophile needs! I don…

I am working on a line for those with depth restrictions -- NOT a true shallow woofer but something that just isn't super deep as most of our drivers are big, nasty, deep woofers. The ultra-shallow market is not something we plan to get into but I thought something shallower than the SA line would be nice. Our future "E" series line with stamped frame was not designed as a reduced depth driver either so we would have left this market totally untouched. SD-2 10" -- 4 7/8" Depth SD-2 12" -- 5 3/8" Depth These will fit many under-seat truck enclosure applications. We had an SD-1 and SD-1 v.2 series some time back that were very popular in the truck market... so naturally the…

18" nightshade v.1, off a autotek mm4000.1. Got it wired to 1 ohm, does much better. This is a cut through btw. check it

Good afternoon. I have a Sundown Saz 3000D. He broke down and needed repair scheme. I live in Russia, may my tongue is not very good. Help me find a diagram on this amp.

Am looking at the T/S parameters for the SA-12 and noticed that the D2’s RE is listed as 4.33 Ohms when tested in series. From what I’m used to seeing, the RE values are typically less than the advertised impedance rating so the 4.33 feels a bit high for a sub with dual 2 ohm coils. The D4's RE value of 7.09 is right in line with what I'd expect. Could someone please help me understand what’s going on here with the D2? Thanks!

Thanks to Ric @ Pulse Car Audio for doing the testing -- see the link to the Pulse section on SMD for more details and videos : http://www.stevemeadedesigns.com/board/topic/108845-15-sundown-audio-sa15d2-tested/

Hey i have a sundown Saz-1000D amp and my dog chewed through my bass gain control wire. I just wanted to check if there was a certain type of replacement wire i should get or if it didn't have to be the same exact wire. and where do you get those wires? thanks for the help

I recently installed this amp with a pair of HAT Clarus 5.25 and I was wondering if the LPF on channels 3 and 4 are not functioning properly. I'm currently running active and I was attempting to bandpass my mids using the Subsonic and LPF. When I select LPF the mids produce that range I selected, however there is a buzzing sound coming from the mids and they sound slightly distorted. When I select HPF they play just fine. The Subsonic is set to 70HZ and the LPF is set to around 5500HZ. Thank you

Anyone have the sundown logo in vector format, such as .eps or .ai? Would really like to cut my own decals in the color I use for my car and I could retrace it but that would take a bit of time

When I opened my trunk this morning to let my lil bro look at my subs both of my dustcaps was off. Is that something I should be worried about?

1 sa-15 ported in 3-3.5 cubes @ 30-35hz with 1500 watts in a wagon is it possible to do 140's on music

These are due in about 4-5 weeks from today. Neo-Pro 8 - 100 watts RMS / 8 ohms * Neo-Pro 10 - 200 watts RMS / 8 ohms * * Assuming proper crossover frequency for your application; typically 80 Hz or so but perhaps higher or lower depending on the power and size of door. Frequency response is good to ~5000 Hz on these -- they are a high Qts design for IB door installations in a car audio environment. To order send a Paypal to me at [email protected] Pre-Order as follows : Eastern USA : States not listed under western USA. Neo-Pro 8 - $80 shipped EACH Neo-Pro 10 - $95 shipped EACH Western USA : ND, SD, NE, KS, OK, TX, NM, CO, WY, MT, ID, UT, AZ, NV, OR, WA, CA Neo-…

Okay i have 2 1500d's strapped at 1ohms 4 dual 2ohm 10's gain not even quarter the way up no bass boost or anything have mechman 240amp alt and 3 deka batts was giving someone a dmeo today and all 4 fuses on my slave amp poped 2 ofem literly melted had to use pliers to take out the 2 ends of the fuses have been running this system same setup for awile now then this just happened outa the blue funny thing is was just playing some hard rock music wasnt even pounding the shit outa them like most the time question is should i try to replace the fuses and see or is there something i can do to test it out beforehand so i dont fry something else making it worse its only on the …

Hello .. I have a saz 3500d but I have some problems with it! Protection light is on all the time even though I have no bass coupled .. It became like this after I made ​​a mistake with the soil to the stereo so the earth by l rca cables. Have a friend who has a firm that makes amplifiers for home use that have looked at it but he says he must have the wiring diagram for saz 3500d in order to repair it. Can you help me with that? or if you think of something else can help me find a wiring diagram? Or do you have some idea of what it could be wrong? are very pleased with the amp in general and would like to fix it so I can use it! Since I live in Sweden and is suck in E…

Had to do some work on my system, my MDF speaker mounts had rotted away in my doors, so while I had the car apart replacing them, I decided to also install the SAX 1000D I had bought a year or so ago, and hadn't yet gotten around to putting in my system. This was to replace the Alpine MRV T-505 that I had been using as a sunb amp. Wow, the difference in bass output is amazing, this is almost too much bass. I don't want my car to sound like the typical boom thump that you'll hear in just about every town in America, but right now it does. Bass just completely overwhelms the satellites, even with my bass settings on the radio set at -6. I've got gain at about 60%, not su…