Sundown Audio

Planning to run this setup for nSPL Finals this weekend... needed to stay under 5000 watts on the nSPL clamp meters. On my meter it clamped exactly 4000 watts last night which should be 4700-5000 on their clamps. Tuning is in the high 30s and peaks at 47 Hz... tuned to 30 Hz and also peaking at 47 Hz it was about 1.8 dB quieter but still not bad at all, IMO. I plan to try cutting the ports down a bit more to see if I can get a tad more from it on the meter... may or may not get that done before the Finals event. Best score with just me in the Jeep was 153.8 and with Nick from Stereo Integrity in it as well we got 154.0 dB -- sealed on the dash. * One SAZ-4500D chilling o…

Originally posted by Greg Kashin on my CACO Forum : http://www.caraudioclassifieds.org/forum/showthread.php?t=54443 ----- Sundown Audio z18 v.2 - the first and only z18 so far in the land that gave birth to the great Borat powered by a dd m3 @0.5

Team Sundown member Walt from South Carolina. 4x Stock SA-12 D4s 2x SAZ-4500Ds I do not suggest doing this to your SA-12s but Walt has been doing it for a while Video of perfect run :

Hey Guys, My new NS v2 12" will be arriving next week and I'm so excited, my question is I want to achieve the most flattest response out of this sub so any recommended enclosure and tuning? TIA

Ported Enclosure would be around 1.2cubes, sa8 is rated at 400watts and I see everyone seems to feed them a lot more for even daily... So will the sa8 still move enough to get some decent output with only 300watts? This setup isn't for competing obviously, just for my old man

Tooling is finally done ! * Logo embossed in the ring. The frames will have the drilled holes sealed up and all the under frame air flow will go through this ring -- brings it in right at the coil. These will show up in production toward the end of the year.

Originally posted by Skip01 on my CACO forum : http://www.caraudioclassifieds.org/forum/showthread.php?t=53777 Therefore... I don't want to hear any "because it's a CRX" comments as this is a big ol' SUV ---------- SA-12 2 SAZ2500s @ 1ohm strapped 2.2cu @ 40hz 148.5 legal @ 46hz 150.4 sealed Kick @ 46hz Bout it.....Thanks Jacob Funny story...ever since i seen Jacob doing nuts scores with 1 15s and so on, than a few guys doing 1 SA12...i wanted too put my name in there....eventually got around too it. Emailed Jacob: "So what sub would u like me too put up a sick score with..z2 12 or SA12" "SA as i sell 10x more of them too Z2" And there we have it

anyone happen to know how much more current a 3500d would draw<1ohm> then 2 1500's strapped <2ohm> thinking about changing out the 1500's for a 3500 to save room but have heard they are power hungry as it stands now i never drop under 12.2 at full tilt not sure if my electrical can handle the 3500 thow fact alt deka under the hood and 2 more in the back big3 2 runs 0 back to other batts

Ok so i bought 2 of these off a guy that got a whole shipment from jacob. He reconed them and sold them. My concern is i asked them to be dual 2 but when i put them on a DMM i get 1.5 per coill. Both subs are like that. My question is do the D2s have that low of impedance or did i get D1.5s

Okay so I'm going with the Z12's v.2 and I'll be powering them with an SAZ-3500D, I have a design for a slot ported box similar to the one I have now for my SA-12's. My question is, the box for my SA-12's is tuned to around 30Hz, what should I tune the box for my Z12's to? Although I want to compete with the Z12's I may keep them in my car from time to time just as a daily driver.

Hello i have a small question when strapping 2 1500d's is 26 inchs to far about will it hurt performance i am having alot of trouble fitting everything in my hatch was hoping to stack the amps but just dont have the room so i was wondering if i could put 1 on each side of the box and still keep them strapped or if i should just divide the box into 2 chambers and run the amps unstrapped would like to get some you guys opinions

Came down with a cold over the weekend so I'll be a little slow for a few days while recovering -- if you receive an email that makes no sense it's the cold medicine so just write me back and let me know you need clarification

Im planning on getting 2 15" NightShades v2 and was wondering if I should go with 2 saz2500s or 2 1500s. i know SD underrates just about everything so what do yall recommend? Also what else should I get as in electrical. how many batts and im guessing i would need a HO alt? Ill most likely do the big3 as well.

Originally posted by Grigoriy Kashin on my SMD Forum : another 156+ from Team Sundown Russia - SMD Forum This is a burp only no-wall setup. ---------- Ok, I'm posting this for Drugban, to cut down on the LOLz over google translate This car is built for IASCA Advanced NW 2 class - everything is behind the B-pillar and beneath the window line. The car is a Russian Izh Oda, a compact 4door hatchback - currently in totally stock form with no sound deadnr at all (they will experiment with it over the week) The gear: subs: - two Sundown Audio z15v.2's d1 amps: - two Sundown Audio SAZ3500D's strapped @ 1ohm running on 16v bats - 3 Optima 5.5L Bluetops + two FIAMM 4v cells meter …

So I had my cracked nightshade 12 reconed by Jacob to a 15 and had him add the V2 coil along with a extra spider. Honestly all I can say is Damn I have owned A lot of subs in my life, but this is by far the loudest I have ever had the pleasure of listening to. The bass from this sub is violent. I know my blazer hates me everytime I start my truck. I am pround to tell people I have sundown in my truck, I also own a saz 3500. So if your thinkin of purchasing any sundown product don't think just buy it. Great products Jacob keep up the great work!!! I will post a vid when I get home, havin problems with my droid posting the link.

I have started development on our Z v.3 woofer -- it is designed to increase thermal capacity a bit from the v.2 and also to be available for a lower price. We are outsourcing the build to our build house that we use for the SA series... BUT we are shipping USA made coils from Precision Econowind over to be used in them The advantage of USA coils ? The Z v.3 passed a 1500-watt 60 Hz sine wave test for 5 minutes with a Chinese coil... but they only take 300 degrees! Well... American coils take 500 degrees! So think that over a bit We are talking 66% higher temperature handling and the speaker already passed the thermal test with the lower temperature coil. Trade offs vs.…

Original posted by Grigoriy Kashin on my SMD forum : Sundown Russia - 156.39 sealed TL score - SMD Forum ---------- Sundown Audio Russia - another client ride 4 Sundown z18 v2's Stetsom 14k2E 3 Hawker HX400's walled in about 14cubes (not nearly enough) tuned to 39Hz Placed 1st in Advanced3 at the National IASCA Finals with 156.39 @48Hz (sealed on the TL) hoping to get a better vid soon, this one just doesn't show the flex enough official scores from the event IASCA Russia - Ðåçóëüòàòû ñîðåâíîâàíèé

I missed out on ordering one of these when they were still in production. I would really like to find one for the new truck. Anyone know where I could find one in really good condition? NOS anywhere?

Ok I was planning on strapping 2 saz 1500's to get around 3k watts out of the two. Around this time I was planning on using a full loaded Fi btl 18; but now I've decided I want to run a TC sounds LMS 5400 18. This is the probably being that the lms 5400 is a dual 2 sub which mean .5 ohm which is a NO NO for 2 saz 1500 strapped. Idk what to do. I've considered running 1 amp per VC but I know that if I don't have my setting right for both amps I could really mess some shit up lol. Should I just run 1 per VC or should I sell the amps and buy the Saz 3000? I know the easiest choice would be sell them for the 3k but I would rather run 2 amps then 1 amp. SHIT! lol

I'm pretty sure I have the electrical needed, but what do you recommend? -This is for Sundown Audio, not regular members that haven't owned the amp i am referring to in this thread.

We just finished out our 4th year in business here at Sundown -- we began selling the SAZ-1500D and SAX-100.2 back in August of 2006! Thanks to all of our customers for taking us this far and we look forward to the next four years! I am pleased to announce several sale items as well as several pre-orders opening up. To order any of the below items please PAYPAL us at [email protected] along with an order list (be specific) -- be SURE to have your address on the payment! You can also order from your favorite local or online dealer -- all dealers have the option to provide these sale and pre-order prices as well. This sale is for the USA ONLY!!! Prices below are sh…

Sundown Pro Mids | Facebook Up on the Sundown Facebook... includes details on estimated pricing.

hello all, i was just wondering what would be optimal box specs for 2-18" Ns v.1. they're both d1's. power to be ran on them is 2 saz 3ks strapped @ 1 ohm . it says on the website 4-5ft.^3 anywhere form 30-40hz. i was planning on 10 cu. after dipslacement. tuning to 35 hz. 16 in^2 per. cu. ft. gonna go with a center slot port let me know what you guys think. thank you!

I have created an actual Sundown Facebook page that you can "Like" and get updates. I've had hundreds of friends requests on my personal page from customers -- and it is just that, a personal page, and not for everyone to see. But I did post alot of Sundown information on there that I'm sure people wanted to see... that information will now go to our actual Facebook page: Sundown Audio| Facebook

Two of my sample motors arrived -- now I am going to work on the coils and then try them out : It will be for from 8s through 18s. ----- Started a new thread as the original was from a few months ago and the title doesn't really say what it's about Project I'm Working On - Car Audio Classifieds