Sundown Audio

Hey Guys, My new NS v2 12" will be arriving next week and I'm so excited, my question is I want to achieve the most flattest response out of this sub so any recommended enclosure and tuning? TIA

The SA line is mostly sold out right now... we only have SA-10 D4 in our warehouse at this time. We have more SA-8s both ways and SA-10 D2 due in 3-4 weeks. We have all other SA sizes and configurations in large quantity due in November. ----- Our distributor in Iowa, Top Dog Audio, has some SA woofers in stock. WoofersEtc.com also has stock on most configurations of the SA line right now as well.

Originally posted by Greg Kashin on my CACO Forum : http://www.caraudioclassifieds.org/forum/showthread.php?t=54443 ----- Sundown Audio z18 v.2 - the first and only z18 so far in the land that gave birth to the great Borat powered by a dd m3 @0.5

Hey guys i was going to cut out some holes today and i was wondering if anyone knew the cutout diameter for a 12inch NS v1 I was thinking off hand it was something like 10.875 (7/8 = 0.875)

Ported Enclosure would be around 1.2cubes, sa8 is rated at 400watts and I see everyone seems to feed them a lot more for even daily... So will the sa8 still move enough to get some decent output with only 300watts? This setup isn't for competing obviously, just for my old man

i would really like to see some nice 2 way and 3 way components that perform without being ripped off for them and have a brand i love backing them, what about you guys?

Tooling is finally done ! * Logo embossed in the ring. The frames will have the drilled holes sealed up and all the under frame air flow will go through this ring -- brings it in right at the coil. These will show up in production toward the end of the year.

Hello i have a small question when strapping 2 1500d's is 26 inchs to far about will it hurt performance i am having alot of trouble fitting everything in my hatch was hoping to stack the amps but just dont have the room so i was wondering if i could put 1 on each side of the box and still keep them strapped or if i should just divide the box into 2 chambers and run the amps unstrapped would like to get some you guys opinions

anyone happen to know how much more current a 3500d would draw<1ohm> then 2 1500's strapped <2ohm> thinking about changing out the 1500's for a 3500 to save room but have heard they are power hungry as it stands now i never drop under 12.2 at full tilt not sure if my electrical can handle the 3500 thow fact alt deka under the hood and 2 more in the back big3 2 runs 0 back to other batts

Okay so I'm going with the Z12's v.2 and I'll be powering them with an SAZ-3500D, I have a design for a slot ported box similar to the one I have now for my SA-12's. My question is, the box for my SA-12's is tuned to around 30Hz, what should I tune the box for my Z12's to? Although I want to compete with the Z12's I may keep them in my car from time to time just as a daily driver.

did some testing with an sa-12 yesterday, and i was amazed at what these little "entry level" subs can do. on with the testing: Car: 1997 Chevy Cavalier z24 w/sunroof Electrical: stock alt, yellow top up front, kinetic 1800 in back, 2/0 welding cable all around Amplifier: One SAZ-3000 Enclosure: 2.7 cube box sub back 6inch aero port firing toward driver side wheel well. Subwoofer: One Sa-12 all testing done using the midwest spl format, meter on dash with window open, my car typically loses.4-.5 by sealing it up. also the subwoofer was brand new out of the box when i started these tests, i did the tests in the order they are listed. back to back about 2 minutes between…

Came down with a cold over the weekend so I'll be a little slow for a few days while recovering -- if you receive an email that makes no sense it's the cold medicine so just write me back and let me know you need clarification

Out of the gate on music at 154.6 dB Congrats Richard Willoughby on your accomplishment ! I emailed him to get some photos as well This is a dash score.

Ok so i bought 2 of these off a guy that got a whole shipment from jacob. He reconed them and sold them. My concern is i asked them to be dual 2 but when i put them on a DMM i get 1.5 per coill. Both subs are like that. My question is do the D2s have that low of impedance or did i get D1.5s

Hello all, Here in the Raleigh, NC area I have been around to a few car audio shops to pick up little things from time to time and I notice that most do not carry any Sundown Audio equipment. To me this has been somewhat of a surprise considering the fact that the company is "local", in the sense that it is based out of the same state and is only a few hours away. The response I have gotten from guys that run these shops is almost offensive to me as a Sundown Audio user. When I ask why they don't carry any Sundown they seem to get on this defensive "high horse" stating that either "Sundown equipment is too expensive, and nobody will buy it" or that "they are just a sma…

So I had my cracked nightshade 12 reconed by Jacob to a 15 and had him add the V2 coil along with a extra spider. Honestly all I can say is Damn I have owned A lot of subs in my life, but this is by far the loudest I have ever had the pleasure of listening to. The bass from this sub is violent. I know my blazer hates me everytime I start my truck. I am pround to tell people I have sundown in my truck, I also own a saz 3500. So if your thinkin of purchasing any sundown product don't think just buy it. Great products Jacob keep up the great work!!! I will post a vid when I get home, havin problems with my droid posting the link.

Im planning on getting 2 15" NightShades v2 and was wondering if I should go with 2 saz2500s or 2 1500s. i know SD underrates just about everything so what do yall recommend? Also what else should I get as in electrical. how many batts and im guessing i would need a HO alt? Ill most likely do the big3 as well.

I'm pretty sure I have the electrical needed, but what do you recommend? -This is for Sundown Audio, not regular members that haven't owned the amp i am referring to in this thread.

Originally posted by Grigoriy Kashin on my SMD Forum : another 156+ from Team Sundown Russia - SMD Forum This is a burp only no-wall setup. ---------- Ok, I'm posting this for Drugban, to cut down on the LOLz over google translate This car is built for IASCA Advanced NW 2 class - everything is behind the B-pillar and beneath the window line. The car is a Russian Izh Oda, a compact 4door hatchback - currently in totally stock form with no sound deadnr at all (they will experiment with it over the week) The gear: subs: - two Sundown Audio z15v.2's d1 amps: - two Sundown Audio SAZ3500D's strapped @ 1ohm running on 16v bats - 3 Optima 5.5L Bluetops + two FIAMM 4v cells meter …

hello all, i was just wondering what would be optimal box specs for 2-18" Ns v.1. they're both d1's. power to be ran on them is 2 saz 3ks strapped @ 1 ohm . it says on the website 4-5ft.^3 anywhere form 30-40hz. i was planning on 10 cu. after dipslacement. tuning to 35 hz. 16 in^2 per. cu. ft. gonna go with a center slot port let me know what you guys think. thank you!

I missed out on ordering one of these when they were still in production. I would really like to find one for the new truck. Anyone know where I could find one in really good condition? NOS anywhere?

Ok I was planning on strapping 2 saz 1500's to get around 3k watts out of the two. Around this time I was planning on using a full loaded Fi btl 18; but now I've decided I want to run a TC sounds LMS 5400 18. This is the probably being that the lms 5400 is a dual 2 sub which mean .5 ohm which is a NO NO for 2 saz 1500 strapped. Idk what to do. I've considered running 1 amp per VC but I know that if I don't have my setting right for both amps I could really mess some shit up lol. Should I just run 1 per VC or should I sell the amps and buy the Saz 3000? I know the easiest choice would be sell them for the 3k but I would rather run 2 amps then 1 amp. SHIT! lol

So... the SA-8 is pretty badass... but I want something louder. Starting on this project : Yep... a Neo 8 with a 3" coil and 22mm linear one-way excursion (that is XBL^2 that you see) and x-mech of 27mm on the frame I'll be utilizing. Will handle around 1000-watts RMS without much trouble thermally and mechanically. Tooling new spiders and cones just for this driver. Going to see how it turns out... but simulation predicts motor force more than 300% higher than the SA-8 if all turns out according to plan. I am designing it for myself primarily as I want to do 157s with four 8s... but I think others will enjoy them too =) Pricing will be a bit higher than an NS v.2 due t…

Yep... you read that correctly. Big bad boy 200x4 Class A/B amps with full SAX-100.4D style crossovers. Stable to 1 ohm mono / 2 ohms bridged... can power a whole system. These things are MASSIVE... I know the trend is for small amps but I like big amps, and so do alot of people still These are not made for typical daily installs... they are made for BIG builds! * It is actually larger than an SAZ-3500D. * Another shot vs. SAZ-3500D ----- Before anyone asks... there is no ETA, I don't know when I'm going to open a pre-order, and pricing is not 100% set. I do expect pricing to be about like the SAZ-2000D, though... give or take.

Testing coming later... change a tad from the initial layout. We ended up with 8x IRFP360LC output FETs -- 66% of what the SAZ-3000D / 2500D have. This output section is WAY stronger than the 1500D v.1 what features IRF640 / 9640 units. Power supply features the same number of FETs as the original 1500D but a new more powerful part like the SAZ-2500D has. Power supply transformers and output inductors not changed from the v.1 1500D -- overall size down about 1.6" * Old 1500D on top and new 1500D v.2 on bottom * Internal fuses removed for SPL competition purposes - customers will need an external ANL unit * New driver board * Old driver board