Sundown Audio

I am sold,, i just got my nightshade 12 with the cracked rim from this guy for a 100 after I checked the coils both read 1.3 so i snatched it. First of seing as how this is my first sundown product I must say I am VERRY Impressed. Going from maistream product to Sundown I must admit I was a little skeptical at first. But all I can say is All Hail Jacob this sub POUNDS. As a matter of fact after hearing this sub I just bought a Sundown 3500 and cant wait to hear them togather. Even though here in north Louisiana Sundown isnt really heard of that much but I promise I will personally be making sure it is. Cant wait to the v2s come out so that I can get another one. Keep up t…

Through them in a box I had laying around the shop yesterday. They are being powered by a pair of saz-3500s @ 0.5ohm each. Vid. Got my new box built today. It works MUCH better. Because I had to move the amps to the back of the truck my rcas weren't long enough. Using some y-splitters as a ghetto extension I was able to get one amp going. With only one saz-3500d @ 1ohm on both subs it hit a 149.1 on the TL. Did the same exact # playing some music too. More vids tomorrow.

Hi all, I've just installed my new amp : a saz 1500. I had the saz1000 on my 15" xcon. I did it this past week end, so I could not buy what I needed. I used the distribution block I already had. I have a 0 ga wire coming from the under hood battery to the trunk, and coming trough a dist block with 3 "out" : 1 for the sax50.4 amp with a 60amp fuse and the 2 others are now used for the saz1500 with a 80 amp fuse for each wire. So, I have 2 4ga wires that goes into the bass amp instead of one 0ga from the dist block to the amp. Is it safe ? I did not change the ground wire from 4 ga to 0ga, but I will do it today because it might not be safe at all now! Is it worth changi…

Hey guys, I am sold out of new 3500s... and as of today all of the used ones are sold out. People that are *already* talking to me about them are good to go -- I am counting those as sold. If you would like to pre-order one from our next production run of new amps feel free to hit me up. Otherwise there are none available at the moment.

Built for a dealer... NS cone is standard on 18s. They went with 3 spiders and dual leads as well. Just a very short break-in period. RE: 3.55 ohms Fs: 35.5 Hz Qes: 0.534 Qms: 7.341 Qts: 0.497 Le: 2.66 mH Vas: 90.04 L BL: 24.556 NA Cms: 49.32 uM/N Mms: 405 g Sens: 90.6 dB 1w/1m

i was wondering...i have 2 sets of components...and was planning on giving them 150watts each..600watts in all for all 4. I figured i could bridge each channel and run 2 comps off of the bridged channel. but the amp is rated for 320w at 4 ohms not 2 ohms which is what they would be running...i dont guess this would work would it??

I've been pretty quiet on here for a while now but I have to say a few words about Sundown and Jacob. I bought 6 - 3500D's and 3 - 125.2's over the course of last year. I never got them all at once but Jacob gave me discounts anyway even though I'm not a member of Team Sundown. Not to mention numerous stickers, t-shirts and a can cozy all for free. A few months back I had an issue with one of the 125.2's and asked Jacob what I should do. He suggested the normal "check your wiring and signal paths" which I did. I even took the amp out of the car and the problem still occurred on the bench. Jacob accepted it as a warranty repair but could not find anything wrong with …

I was just wondering if anyone else other than me had the thought of Jacob makeing any mids or highs?

Due to all the negative comments that were way out of line imo on the announcement of the new SAZ-2500D. I think Jake you should post a sticky stating that all Sundown Products and specifications are subject to change due to continuing upgrades, modifications and improvements! This would help clarify to all that Sundown continues to develop and improve new models and older models will be phased out.

OK I just got my amp from DB-R today. All I have to say is that this thing is beautiful but frightening. Still waiting on my Fi 15" BLs. This is my first upper class amp. So all of you well experienced bass heads what should I expect out this amp?

Got a pair built to ship to a customer... Customized with double leads, 3 spiders, and a Nightshade cone. Specs as follows with a few minutes break-in : RE: 1.84 ohms FS: 37.87 Hz Qes: 0.531 Qms: 7.56 Qts: 0.496 Le: 1.30 mH Vas: 45.9 L BL: 16.73 NA Cms: 52.21 uM/N Mms: 338 grams Sens: 88.56 1w/1m NS cone + Double leads add about 80 grams MMS compared to the Z v.2 cone with single leads. The added mass got the Fs down and Qts up a bit -- which will be quite suitable for the 4th order band-pass the customer wants to use.

Incompatible Browser | Facebook become a fan !!!

We are holding a sale on the SAZ-1000D model for $275 shipped in the continental USA -- regular price is $315 each. Everyone knows what these bad boys can do! Here is a link to the specification page : Sundown Audio - SAZ-1000D Either contact your favorite online or local dealer or send me a Paypal to [email protected] to order ! This would make a GREAT combination with the close-out SAX-50.4 for a complete Sundown amp system for only $475 total.

I was pokein around the net and I read that sundown, IA, RD and Stetsom all use the EXACT same boards built by a build house out of china named ZENON. This company is supposed to make High end boards for these companies. So my question is...I have a few grand cash for my next amp why should I go with sundown when RD and IA are less if they are the same?

This is the next show date for Comp Only! updates to follow once a location and time is determined!

Hey guys I think this would be a great show for every one to attend! it is closer to NC so every one should be able to make this!! Indoor Car Show, Live Bands, Roller Durby Bout all in one TRADER MARC’S INDOOR CAR SHOW BY: KOSS MOTORSPORTS TRADER MARC’S & EXPO CENTER 02-27-2010 Time: 1000AM to 500PM TRADER MARC’S EXPO CENTER 2200 CAROLINA PLACE FORT MILL SC 29715 Car Show 125+ Classes & True SPL Sound Off CALLING ALL ANTIQUES, CLASSIC, STREET RO! DS, TRUCKS, MOTORCYCLES, IMPORTS, SPORT COMPACTS $35.00 INDOOR Entry Fee $20.00 OUT SIDE Entry Fee $5.00 GENERAL ADMITION CLUB DISCOUNT FOR 5+ ENTRIES More Info: www.kossmotorsports.com or call Steve 803-320-3193 FEATURIN…

For the love of all the trunk cars!! been doing some testing and I am sure that people would love to know exactly what you can do with 1500 clamped watts in a trunk car!! all the equipment is in the trunk and total clamped power is 1440watts for a score of 148.11db!!enjoy the video!!

I am going to make the official announcement now that we are sold out of new SAZ-2000Ds -- yes, I am in fact sold out... a few used ones remain but that is it. To replace it I am developing an SAZ-2500D model. This is a new board tooling for Sundown and is ours in the USA exclusively just like the SAZ-3500D. Just a HAIR larger than the SAZ-2000D and over 500 watts more power is expected from it. I am excited about it -- more details will be available once I have the prototype in hand. This evens out the amp line to 1500, 2500, 3500, and 4500 so there is not such a large gap from the 2000 to the 3500. It is too early for ETAs or pricing... but I will do a pre-order once te…

Hey guys, We are back-logged for a bit on woofer building here. The Z v.2 shipment landed last week and we have been SLAMMED ever since. We also sold the last stack of BM 10s to a customer and have been working to get those out to him. So... expect a bit longer lead time to get a sub if you order one we have to build. I plan to work late this week to catch up as fast as possible.

Well, I got busy on Chicagofans amp rack and enclosure and wiring etc, and I took a second to do this.

Every message I sent today was rejected by my server... just got all of the errors all at once at the end of the day. Something is up and they seem to think I sent over 100 e-mails in one hour... so until I can figure out what is going on it may take me longer than normal to reply. I can still RECEIVE emails no problem, though, so you can still send me a message... but this problem seems to have made email not work on my Blackberry as well and I have to log into my Hotmail to send any messages... so response time will be up. Sorry guys... working with the hosting company on this.

well yesterday i went down to Andrews, SC to meet with Walt(cookiemonster) to pick up some new sundown goodies. Already had a saz1500 so i picked up 4 sa12's and a saz1000d. Walt gave me class A service. 2 of these are for my truck with the saz1500 and the other 2 go in my wifes honda pilot with the saz1000d....i got the two in my truck yesterday and all i can say is wow...so much better than my re se's

Does anyone know what the motor width of the sundown 12" sub is? If theres a few 12" lines Im looking for one that is 6.75" in width if not less thanks

I have a guy trying to sell me a nightshade 12 that the rim where the surround meets is cracked. I am just wondering could that be fixed and if so, howe much would it be. He said that it was supposedly damaged in shipping.

I wasn't going to start production on these so soon... but there is demand from my International accounts for these so I may start them pretty soon. Who would be in to a pre-sale on these ? Price would be $150 shipped in the continental USA for one and decrease a bit for multiples. I won't start immediately... I am testing one more prototype cone before confirmation... but I am surveying interest.