Sundown Audio

Hey guys I am looking for a total of 2- Sundown stickers. I don't really know where to get a hold of them and i know Jacob is a busy guy so I just thought i would post here! i guess if someone has unused sticker they don't want to use send me a p/m. thanks Kenneth

Low tuned SA-8 on music : We didn't have anyone with long hair around... so we used paper.

Anybody know where they sell the sundown saz and z series woofers?Didnt see them on her.

whats the difference between the saz and sae line in sundown amps?would the sae1200 be pretty much equal to the audioque 1200 as far as power?Each would be pushing to ssa icon 12

ok so i got my self a 3000d and am waiting on my fi q 15" D2 to come. i was wondering if i ever expand to a seconded one if i could run the 2 at .5 at around 2400 watts and not piss off the amp for daily use. other than that any tuning suggestion for the single fi Q besides don't crank the gain knob all the way up. and if u use a dmm what should it read for 1100 - 1200 watts, at the moment it says a bought 70V but that dos not sound right it would have blown my 100A fuse by now it that was true. thank you for your time.

are u still taking pre orders on them? how is the sound quality and out put with them tuned low 28-30? thinking about selling my IDQ15s and kicker zx1000.1 and going with either 2 sa-8s or 2 ssa dcons. either way i go i would like to get a sae 1200 to power them. like the idea of running 8s to show ppl wat they can do. front stage is going to be ID ctx65cs powered by a sax 50.4 bridged

He said they pull less amps and have more adjustability. He also tried to get me to get a W3 over getting an SA12 He looked up sundowns website and looked at their product and said it looked great and all but JL was still better. LOL What do you guys think about that? Also 3 different car audio shops I went to hadnt even heard of sundown. I tried telling them they are a top rated company on the car audio forums and they all looked at me like I didnt know WTF I was talking about

No offense to anyone, ive never heard one. i'm just curious, but what is so great about a sundown audio amp, I have read the specs and they seam good, but there thd distortion isn't that low, and people always recommend the 1500rms version for an xcon and I always wondered why?? I have read they have plenty of raw power, but i'm the kind of guy that likes to know every detail.

So I got the v.1 Nightshade up to 155.9 dB today on a 16v system -- right at 9.8kw clamped power. Used a slightly different coil but the cone / spider were the bone stock Nightshade parts... no pole plug of any kind used either. Not quite as good as the NS v.2 -- which did 156.1 on 12v on the same amps / same load... anxiously awaiting putting the v.2 in there on the 16v system I am hoping for 157+ from it ! Crappy pics of the sub... but I got the score : The coil is like the NS v.2 coil but only 50mm long... kind of a mix of the v.1 coil and the v.2 coil

Some "team" shirts would be nice for sbn 2010...who's wit me??? Good idea?? Bad idea??? Cause I have a feeling we gonna own that motha

Just got the new 1200d, setup with knukonceptz 4 gauge and my old 80 amp fuse from my alpine pdx 600 watt, and so far it sounds a lot more like 600 than 1200. Would I see a huge improvement if I upgraded to 1/0? The reason I ask is KnuKonceptz site says their 4 gauge handles 200 amps, and apparently the 1200 pulls only 150 amps. Either way, I'm definitely upgrading my fuse to 150 like it should be.

Okay is Sundown going to make a bigger amp for 2010? I'm just curious because now their is a 4500D, will their be a 6000D?

Hey guys... I had to strengthen my SPAM filter today... finally got to the end of my rope on it -- I had 300 SPAM e-mails over the weekend and it's a pain to sort through and find the good ones I need to answer. SO... starting today if you e-mail me and DO NOT hear back within 2-5 days please post up here so I can make sure my SPAM filter isn't TOO strong.

1: In the power connection section of the manual, it shows the amp connected directly to the battery; no fuse for the wire, just the 3 30 amp fuses on the amp, but there is a fuse in the wire in the 2000 and 3500 diagram. I know that the 2000 and 3500 do not have fuses of their own and therefore need the fuse in the power wire, but I did not know that there was no need to fuse the power wire for the 1000 and 1500... I have always been told to fuse the power wire no matter what, so this is new to me. 2: I have always been told by many reputable members of this forum that sundown rates their amps' output at 12.8v instead of 14.4. However, in the manual, it says that th…

The site just got a ton of great new product photos for all the new amps, submit forms for rides and reviews and the front page got some updates. Enjoy Sundown Audio - Sundown Audio - Quality Mobile Amplifiers & Subwoofers

For anyone that would like to start this new season off!! there is a show comming up! Location: Sumter SC (K-Mart) Date: Jan 16th Time: 12:00 to 4:00pm It would be great to see some of these loud Sundown people there hope you can make it! who all is going to be there?

if you havent seen the build log...... yup cramming 3 nightshade 18s into a Cavalier!!!! was VERY close to not fitting like i had originally planned but it worked out

I Just Ordered A 100.2 Amp From Db-R I Know it says there is a 7-10 day lead, but how long would it normally take to get an amp to Houston Texas ?

I Tried ordering something and put in all my information, when i clicked confirm it says... " 15005 Processor Decline - This transaction cannot be processed. " What does this mean? ive confirmed i have the money, should i try again or has it charged my card already?

... do not call from a blocked number or name, your call will not be answered. Sales people love calling us so we do not answer these calls. Also... MUCH more effective than leaving a phone message would be to e-mail me if you can't reach us by phone on the first try. We don't publish the number on our site since it is NOT the best way to reach us... often times we cannot get to the phone.

I wasn't going to start production on these so soon... but there is demand from my International accounts for these so I may start them pretty soon. Who would be in to a pre-sale on these ? Price would be $150 shipped in the continental USA for one and decrease a bit for multiples. I won't start immediately... I am testing one more prototype cone before confirmation... but I am surveying interest.

Alright Jake get back to work. Do what you can with the help you got. Bout time for some mex.

yah im the champ

Okay so I have the low end figured out, but for the mids and highs I haven't decided. I figured since I already have Kicker 6 x 9's I'd go with some Kicker 6 1/2" for the doors and some 1" tweets. I think the SAX 50.4 would be a good buy. My low end will be (2) of the SA-12's powered by the SAZ-2000D. Will the mids and highs keep up with the low end or should I go bigger?

We will be closed Friday for New Years.