Sundown Audio

Friends. I have ordered a FI Q12 (Dual 2 OHMS) single sub that will go into a ported sub-woofer enclosure just as soon as I can get in contact with pound that sound. First, I am trying to find out what's the difference between the following two amps, if there is any. a. Sundown Audio SAZ-1000D = RMS 600 x 1 watts @ 2 ohms b. Sundown Audio SAE-1200D = RMS 600 x 1 watts @ 2 ohms Secondly, will either of these two be sufficient enough to power that particular sub since both are 2ohms x 1 600 RMS--------------------(underrated) ? a.

im going to be running the sax-100.4 amp with a set of 6 1/2 components in the front and some 6X9 in the rear, deck is alpine cda-9885. my question is how can i run the front components speakers and the rear speakers active using the same amp ? i thought i read somewhere you can do that with this amp im just not sure how if it only has 4 channels. isn't it one channel per speaker? or should i just run the front with the amp and rear of the deck ? any suggestions or ideas would be appreciated thank you!

like it says when will they be avalible........i want em

Does anyone know if $525 for the saz2000 is the christmas sale price or was that the original set price?

I purchased my amplifier from Db-r, The day i got it i hooked it up it blew and started smoking. I sent it in to Db-R they fixed it; The guys at Db-R said the power input was soldered too long and it burnt up and smoked my power supply. They replaced everything under warranty. Today (12/25/09) I opened my Saz-3000d and was just looking around at Sundown's beautiful job at designing/making amplifiers and found this. as you can see the MOSFET's most are soldered in on the top, but there are a few that are not. Is this something to be worried about?

i went to ssa store and it says the preorder for the saz 4500 is 1100 dollars has that changed ,and does anyone know what the price would be arond the end of january thats when my money comes in?

i read that the nightshades rms is 1500 and i seen a guy run each nightshade 15 with a saz3000 is that a special order woofer?

We are closed Thursday and Friday for the Holiday.

i can hook my mids and highs up either 2 ohm stereo or 4 ohm bridged. Is either way more efficient than the other? Right now im just running all 4 channels regular, but next week when my other 6.5's get here i am changing it. thanks

Merry Christmas to me, Thanks Jacob she's beautiful cant wait to get her up and running.

There is a BIG sale going on. We authorized dB-R to do a huge 25% off across the board sale on all Refurbished Amplifiers! http://www.db-r.com/sell/store/ Here is a price list, just some examples: SAX-100.4 Refurbished as low as $202.50 SAX-50.4 Refurbished as low as $153.75 SAX-100.2 Refurbished as low as $149.25 SAX-125.2 Refurbished as low as $157.50 SAZ-1000D Refurbished as low as $206.25 SAE-1200D Refurbished as low as $217.50 SAZ-1500D Refurbished as low as $261.75 SAZ-2000D Refurbished as low as $382.50 SAZ-3500D Refurbished as low as $581.25 These ALL have a 1 Year Warranty!

if Db-r doesnt have any saz 3000ds where is the next best place to get them?thanks in advanced

Well I hope that every one has a great christmas!! :23) The new year will be upon us soon. Lets hear the new goals and new setup ideas for this season or even predictions for the up and comming season? I would bet there will be a new addition to the 150db trunck cars comming to the lanes soon? I am also hoping to maybe see 160db in a SSNW setup I know there are a few cars that are on the hunt for this score. Also there are many new setups that plan on bassracing the 149.9 class and a few new ones for the 159.9 class if they can get it done before SBN? so lets hear about the new builds comming out this season or tell us about what scores you hope to do or even what score …

i was wondering if u could help me. im changing cars and want to put a smaller box in it. right now i have 2 15 btls in a 8.5 cft box. i want to get the sa8's , 4 of em, would i be loosing a crap load of sound. i realize that they are 8s but will i hate myself for changing. im getting a magnum and im using a saz2000. they will be vented.

What is the displacement for an 18'' Nightshade? Couldnt find it on the site. Also, how much room behind the pole does it need to vent in the box? I was thinking a few inches is good?

I got my amps in yesterday from jacob! And all I can say is WOW! they are beasty! SunDown has never let me down! SunDown Audio I LOVE YOU! Plus I love the new hex head screw's(not phillips anymore)

ok! I have just a general question on spl boxes . lets say you have a box that can do a db of 150 in a ... lets say... a suburban now lets say you have two duplicate set ups two same boxes, two same amps , two same subs and you put both boxes in the same car would you end up with 300 db? now i know its more technical then being able to stick the same boxes together to make more db's , so whats the science behind this? also i know that its hard just to have the power going to the amps for a single setup none the less two setups so lets just say the power is coming from an outside source into this suburban ones again just l…

does anyone know the price of the saz 4500 after sales well towards february?

First burp... HU @ 0 position on sub control. Matched best score ever with the Monster at any time (155.3) -- best I ever did at my shop on my meter was 155.1 dB, though. Now... HU at +3 position ! MY BEST SCORE EVER -- one OR two subs Man I am excited... 155.9 was my best before with two Nightshade 15s and four 3000s on an 18v system. This time... ONE NS v.2 15" and two SAZ-4500Ds on 12 volts !

Minimal break-in time... just a few minutes on the bench: RE (Series): 4.33 ohms Fs: 30.3 Hz Qes: 0.519 Qms: 7.250 Qts: 0.484 Le: 4.743 mH Vas: 29.077 L BL: 22.168 NA Cms: 89.22 uM/N Mms: 308 g Took a few minute break from shipping 4500s and measured these bad boys... I expect Fs to drop to 25 Hz or so with full break-in... which will take probably a week or so of play on these.

Will start shipping them ASAP. These things are HEAVY!

in my future install i want to go active with my 100.4. and i want to get a pair of ID horns. here is how i am going to set it up. 1.2khz and above to the horns 80hz-1.2khz to the midbasses so will i be needing 2 sets of rca's or just 1?? b/c i will be using all 4 outputs right so i should have 2 sets of rca's?? sorry i haven't ran active before so i am a "active virgin" lol!! so i will have some question so ANY help here would be good. my new install will be starting in the summer so i have plenty of time to think and plan to get everything right! my new install will be 2-15inch NS v1 and 2-saz2000 strapped with 2-nsb90's and 1-h/o along with the big 3 (the h/o and b…

How many amp hours will be needed to run a Saz-3000d on .5 ohms? i will be having a 270 amp alt. thanks, Julian.

I would like to know how much is the recone for ns 12" and whats included in the recone package? TIA.

my bad i put my last one under ssa antone know when the saz 4500 comes out?