Sundown Audio

yah im the champ

Special Holiday pricing on the SAZ-1500D and SAZ-2000D models available until January 8th, 2010 -- or while supplies last ! SAZ-1500D @ $425 each SAZ-2000D @ $525 each Shipped in continental 48 states ! To order contact your favorite Sundown Audio dealer OR send me a Paypal to [email protected] This sale is for USA ONLY.

Alright Jake get back to work. Do what you can with the help you got. Bout time for some mex.

Due to shipping delays the Z v.2 ETA is being pushed back to January 2010. I was hoping to start shipping them before the end of the year but that will not happen. There will not be a pre-sale but I will offer introductory pricing on them when all my parts are in.

PRE-SALE ORDERS ARE FINAL - THERE WILL BE NO REFUNDS -- If you are not 100% sure you will be financially stable then don't pre-order. No more exceptions. These amps are capable of a real 1500+ watts at 12.8 volts. They will out-perform many other 1500 watt rated amps (like the Audiopipe 1500) easily! COST ON PRE-SALE : AUGUST - $250 each SEPTEMBER - $260 each OCTOBER - $270 each NOVEMBER - $280 each PRICE IS SHIPPED IN CONTINENTAL 48 STATES. CONTACT ME ABOUT AK, HI, and international !!! The earlier you pre-order the lower the price will be. REGULAR price will be $350 MAP / $549 MSRP when in stock! PAYPAL me at [email protected] to take advantage of the pre-sale …

FTW!

We will be closed Friday for New Years.

Friends. I have ordered a FI Q12 (Dual 2 OHMS) single sub that will go into a ported sub-woofer enclosure just as soon as I can get in contact with pound that sound. First, I am trying to find out what's the difference between the following two amps, if there is any. a. Sundown Audio SAZ-1000D = RMS 600 x 1 watts @ 2 ohms b. Sundown Audio SAE-1200D = RMS 600 x 1 watts @ 2 ohms Secondly, will either of these two be sufficient enough to power that particular sub since both are 2ohms x 1 600 RMS--------------------(underrated) ? a.

I purchased my amplifier from Db-r, The day i got it i hooked it up it blew and started smoking. I sent it in to Db-R they fixed it; The guys at Db-R said the power input was soldered too long and it burnt up and smoked my power supply. They replaced everything under warranty. Today (12/25/09) I opened my Saz-3000d and was just looking around at Sundown's beautiful job at designing/making amplifiers and found this. as you can see the MOSFET's most are soldered in on the top, but there are a few that are not. Is this something to be worried about?

There is a BIG sale going on. We authorized dB-R to do a huge 25% off across the board sale on all Refurbished Amplifiers! http://www.db-r.com/sell/store/ Here is a price list, just some examples: SAX-100.4 Refurbished as low as $202.50 SAX-50.4 Refurbished as low as $153.75 SAX-100.2 Refurbished as low as $149.25 SAX-125.2 Refurbished as low as $157.50 SAZ-1000D Refurbished as low as $206.25 SAE-1200D Refurbished as low as $217.50 SAZ-1500D Refurbished as low as $261.75 SAZ-2000D Refurbished as low as $382.50 SAZ-3500D Refurbished as low as $581.25 These ALL have a 1 Year Warranty!

8x Used SAZ-3500Ds - $750 each 1-year warranty included. Shipped price in continental 48 states. Trade-Ins from Team Sundown members. Condition varies but they are 8-9 / 10 at least.

im going to be running the sax-100.4 amp with a set of 6 1/2 components in the front and some 6X9 in the rear, deck is alpine cda-9885. my question is how can i run the front components speakers and the rear speakers active using the same amp ? i thought i read somewhere you can do that with this amp im just not sure how if it only has 4 channels. isn't it one channel per speaker? or should i just run the front with the amp and rear of the deck ? any suggestions or ideas would be appreciated thank you!

like it says when will they be avalible........i want em

i read that the nightshades rms is 1500 and i seen a guy run each nightshade 15 with a saz3000 is that a special order woofer?

Does anyone know if $525 for the saz2000 is the christmas sale price or was that the original set price?

i went to ssa store and it says the preorder for the saz 4500 is 1100 dollars has that changed ,and does anyone know what the price would be arond the end of january thats when my money comes in?

I got my amps in yesterday from jacob! And all I can say is WOW! they are beasty! SunDown has never let me down! SunDown Audio I LOVE YOU! Plus I love the new hex head screw's(not phillips anymore)

Merry Christmas to me, Thanks Jacob she's beautiful cant wait to get her up and running.

We are closed Thursday and Friday for the Holiday.

if Db-r doesnt have any saz 3000ds where is the next best place to get them?thanks in advanced

i was wondering if u could help me. im changing cars and want to put a smaller box in it. right now i have 2 15 btls in a 8.5 cft box. i want to get the sa8's , 4 of em, would i be loosing a crap load of sound. i realize that they are 8s but will i hate myself for changing. im getting a magnum and im using a saz2000. they will be vented.

Well I hope that every one has a great christmas!! :23) The new year will be upon us soon. Lets hear the new goals and new setup ideas for this season or even predictions for the up and comming season? I would bet there will be a new addition to the 150db trunck cars comming to the lanes soon? I am also hoping to maybe see 160db in a SSNW setup I know there are a few cars that are on the hunt for this score. Also there are many new setups that plan on bassracing the 149.9 class and a few new ones for the 159.9 class if they can get it done before SBN? so lets hear about the new builds comming out this season or tell us about what scores you hope to do or even what score …

So Sean is up with his CRX and we are doing some testing... we hit a brick wall last time at 149.0 dB using a 4" aero-port. So... Sean and I got the idea to try a 6" aero-port for the single 8" woofer! The result is 149.9 dB so far. Peak is 66 Hz in the kick... the CRX normally peaks at 68 Hz so we are going to work on re-tuning to break the 150 outlaw. Fun stuff We have as much port area as cone are now *laughs*

Will start shipping them ASAP. These things are HEAVY!

What is the displacement for an 18'' Nightshade? Couldnt find it on the site. Also, how much room behind the pole does it need to vent in the box? I was thinking a few inches is good?